[WANTED]: APPLE-2 software for DEAF-TTY connections.

Andrew Lionel Dalrymple Sirald at cup.portal.com
Tue Apr 4 01:02:55 AEST 1989


 
___________________________________________________________
 
    [WANTED]: APPLE-2 software for DEAF-TTY connections.
 
-----------------------------------------------------------
 
    I'm looking for APPLE-2 software or a BASIC program
that will connect me to a DEAF-TTY.  DTTY uses the BAUDOT
character set (5-bit data words).  APPLE-2 uses the ASCII
character set (8-bit data words).  I need a interface be-
tween the 45.5 baud rate that BAUDOT requires and the 300/
1200 baud rate that I'm set-up with.  I realize that the
"APPLE-CAT" modem accomplishes this between h/w and s/w,
but I'm trying to make due with what I have.
 
    If anyone out there can aim me towards the software
for this (share/freeware?) or actually could port something
simple over into BASIC or ASM/HEX, that would be most ap-
preciated.
 
    If you don't happen to have even the foggiest of what
I am speaking about, but could steer me towards other re-
sources, THAT is also most appreciated.
 
    Please try to reach me at the following addresses; upon
failure to reach me, please post back here.  In advance,
thank you for your time and effort.  You may be the one to
bring friends and family closer together - please give it
a go.
 
 
Cordially,
 
  A. DALRYMPLE             sirald at cup.portal.com
                           sun!portal!cup.portal.com!sirald
___________________________________________________________
 



More information about the Alt.sources mailing list