v14i020: dmake version 3.5 part 10/21
Dennis Vadura
dvadura at watdragon.waterloo.edu
Fri Jul 27 09:45:41 AEST 1990
Posting-number: Volume 14, Issue 20
Submitted-by: dvadura at watdragon.waterloo.edu (Dennis Vadura)
Archive-name: dmake/part10
#!/bin/sh
# this is part 10 of a multipart archive
# do not concatenate these parts, unpack them in order with /bin/sh
# file man/dmake.p continued
#
CurArch=10
if test ! -r s2_seq_.tmp
then echo "Please unpack part 1 first!"
exit 1; fi
( read Scheck
if test "$Scheck" != $CurArch
then echo "Please unpack part $Scheck next!"
exit 1;
else exit 0; fi
) < s2_seq_.tmp || exit 1
echo "x - Continuing file man/dmake.p"
sed 's/^X//' << 'SHAR_EOF' >> man/dmake.p
X
X
X
XVersion 3.50 UW 10
X
X
X
X
XDMAKE(p) Unsupported Software DMAKE(p)
X
X
X
X assignment allows macro values to grow:
X
X MACRO += LINE
X
X adds the value of LINE to the previous value of MACRO
X separating the two by a single space (LINE is not expanded).
X The final form:
X
X MACRO +:= LINE
X
X is similar to ++==, with the difference that the value of LINE
X is expanded before being added to the previous value of
X MACRO.
X
X When ddmmaakkee defines a non-environment macro it strips leading
X and trailing white space from the macro value. Macros
X imported from the environment via either the .IMPORT special
X target (see the SPECIAL TARGETS section), or the --ee, or --EE
X flags are an exception to this rule. Their values are
X always taken literally and white space is never stripped.
X In addition, macros defined using the .IMPORT special target
X do not have their values expanded when they are used within
X a makefile. In contrast, environment macros that are
X imported due to the specification of the --ee or --EE flags are
X subject to expansion when used.
X
X To specify a macro expansion enclose the name in () or {}
X and precede it with a dollar sign $. Thus $(TEST)
X represents an expansion of the macro variable named TEST.
X If TEST is defined then $(TEST) is replaced by its expanded
X value. If TEST is not defined then $(TEST) expands to the
X NULL string (this is equivalent to defining a macro as
X 'TEST=' ). A short form may be used for single character
X named macros. In this case the parentheses are optional,
X and $(I) is equivalent to $I. Macro expansion is recursive,
X hence if the value string contains an expression represent-
X ing a macro expansion, the expansion is performed. Circular
X macro expansions are detected and cause an error to be
X issued.
X
X When defining a macro the given macro name is first expanded
X before being used to define the macro. Thus it is possible
X to define macros whose names depend on values of other mac-
X ros. For example, suppose
X
X CWD = $(PWD:b)
X
X is defined, then the value of $(CWD) is the name of the
X current directory. This can be used to define macros
X specific to this directory, for example:
X
X _$(CWD).prt = list of files to print...
X
X
X
XVersion 3.50 UW 11
X
X
X
X
XDMAKE(p) Unsupported Software DMAKE(p)
X
X
X
X The actual name of the defined macro is a function of the
X current directory. A construct such as this is useful when
X processing a hierarchy of directories using .SETDIR attri-
X buted targets and a collection of small distributed makefile
X stubs.
X
X Macro variables may be defined within the makefile, on the
X command line, or imported from the environment.
X
X ddmmaakkee supports several non-standard macro expansions: The
X first is of the form:
X
X _$_(_m_a_c_r_o___n_a_m_e_:_m_o_d_i_f_i_e_r___l_i_s_t_:_m_o_d_i_f_i_e_r___l_i_s_t_:_._._._)
X
X where _m_o_d_i_f_i_e_r___l_i_s_t is chosen from the set { D or d, F or f,
X B or b, S or s, T or t } and
X
X d - directory portion of all path names
X f - file (including suffix) portion of path names
X b - file (not including suffix) portion of path names
X s - simple pattern substitution
X t - tokenization.
X
X Thus if we have the example:
X
X test = d1/d2/d3/a.out f.out d1/k.out
X
X The following macro expansions produce the values on the
X right of '-->' after expansion.
X
X $(test:d) --> d1/d2/d3/ d1/
X $(test:b) --> a f k
X $(test:f) --> a.out f.out k.out
X ${test:db} --> d1/d2/d3/a f d1/k
X ${test:s/out/in/:f} --> a.in f.in k.in
X $(test:f:t"+") --> a.out+f.out+k.out
X
X If a token ends in a string composed from the value of the
X macro DIRBRKSTR (ie. ends in a directory separator string,
X e.g. '/' in UNIX) and you use the ::dd modifier then the
X expansion returns the directory name less the final direc-
X tory separator string. Thus successive pairs of :d modif-
X iers each remove a level of directory in the token string.
X
X The tokenization modifier takes all white space separated
X tokens from the macro value and separates them by the quoted
X separator string. The separator string may contain the fol-
X lowing escape codes \a => <bel>, \b => <backspace>, \f =>
X <formfeed>, \n => <nl>, \r => <cr>, \t => <tab>, \v =>
X <vertical tab>, \" => ", and \xxx => <xxx> where xxx is the
X octal representation of a character. Thus the expansion:
X
X
X
X
XVersion 3.50 UW 12
X
X
X
X
XDMAKE(p) Unsupported Software DMAKE(p)
X
X
X
X $(test:f:t"+\n")
X
X gives:
X
X a.out+
X f.out+
X k.out
X
X The second non-standard form of macro expansion allows for
X recursive macros. It is possible to specify a $(_m_a_c_r_o___n_a_m_e)
X or ${_m_a_c_r_o___n_a_m_e} expansion where _m_a_c_r_o___n_a_m_e contains more $(
X ... ) or ${ ... } macro expansions itself.
X
X For example $(CC$(_HOST)$(_COMPILER)) will first expand
X CC$(_HOST)$(_COMPILER) to get a result and use that result
X as the name of the macro to expand. This is useful for
X writing a makefile for more than one target environment. As
X an example consider the following hypothetical case. Suppose
X that _HOST and _COMPILER are imported from the environment
X and are set to represent the host machine type and the host
X compiler respectively.
X
X CFLAGS_VAX_CC = -c -O # _HOST == "_VAX", _COMPILER == "_CC"
X CFLAGS_PC_MSC = -c -ML # _HOST == "_PC", _COMPILER == "_MSC"
X
X # redefine CFLAGS macro as:
X
X CFLAGS := $(CFLAGS$(_HOST)$(_COMPILER))
X
X This causes CFLAGS to take on a value that corresponds to
X the environment in which the make is being invoked.
X
X The final non-standard macro expansion is of the form:
X
X string1{token_list}string2
X
X where string1, string2 and token_list are expanded. After
X expansion, string1 is prepended to each token found in
X token_list and string2 is appended to each resulting token
X from the previous prepend. string1 and string2 are not del-
X imited by white space whereas the tokens in token_list are.
X A null token in the token list is specified using "". Thus
X using another example we have:
X
X test/{f1 f2}.o --> test/f1.o test/f2.o
X test/ {f1 f2}.o --> test/ f1.o f2.o
X test/{f1 f2} .o --> test/f1 test/f2 .o
X test/{ f1 "f2" "" }.o --> test/f1.o test/f2.o
X test/.o
X
X and
X
X
X
X
XVersion 3.50 UW 13
X
X
X
X
XDMAKE(p) Unsupported Software DMAKE(p)
X
X
X
X test/{ d1 d2 }/{ f1 f2 }.o --> test/d1/f1.o
X test/d1/f2.o
X test/d2/f1.o
X test/d2/f2.o
X
X See the SPECIAL MACROS section for a description of the spe-
X cial macros that ddmmaakkee defines and understands.
X
XRRUULLEESS AANNDD TTAARRGGEETTSS
X A makefile contains a series of entries that specify depen-
X dencies. Such entries are called _t_a_r_g_e_t_/_p_r_e_r_e_q_u_i_s_i_t_e or
X _r_u_l_e definitions. Each rule definition is optionally fol-
X lowed by a set of lines that provide a recipe for updating
X any targets defined by the rule. Whenever ddmmaakkee attempts to
X bring a target up to date and an explicit recipe is provided
X with a rule defining the target, that recipe is used to
X update the target. A rule definition begins with a line
X having the following syntax:
X
X _<_t_a_r_g_e_t_s_> [_<_a_t_t_r_i_b_u_t_e_s_>] _<_r_u_l_e_o_p_> [_<_p_r_e_r_e_q_u_i_s_i_t_e_s_>] [;_<_r_e_c_i_p_e_>]
X
X _t_a_r_g_e_t_s is a non-empty list of targets. If the target is a
X special target (see SPECIAL TARGETS section below) then it
X must appear alone on the rule line. For example:
X
X .IMPORT .ERROR : ...
X
X is not allowed since both .IMPORT and .ERROR are special
X targets. Special targets are not used in the construction
X of the dependency graph and will not be made.
X
X _a_t_t_r_i_b_u_t_e_s is a possibly empty list of attributes. Any
X attribute defined in the ATTRIBUTES section above may be
X specified. All attributes will be applied to the list of
X named targets in the rule definition. No other targets will
X be affected.
X
X
X NOTE: As stated earlier, if both the target list and
X prerequisite list are empty but the attributes list
X is not, then the specified attributes affect all
X targets in the makefile.
X
X
X _r_u_l_e_o_p is a separator which is used to identify the targets
X from the prerequisites. Optionally it also provides a
X facility for modifying the way in which ddmmaakkee handles the
X making of the associated targets. In its simplest form the
X operator is a single ':', and need not be separated by white
X space from its neighboring tokens. It may additionally be
X followed by any of the modifiers { !, ^, -, : }, where:
X
X
X
X
XVersion 3.50 UW 14
X
X
X
X
XDMAKE(p) Unsupported Software DMAKE(p)
X
X
X
X !! says execute the recipe for the associated targets once
X for each out of date prerequisite. Ordinarily the
X recipe is executed once for all out of date prere-
X quisites at the same time.
X
X ^^ says to insert the specified prerequisites, if any,
X before any other prerequisites already associated with
X the specified targets. In general, it is not useful to
X specify ^ with an empty list of prerequisites.
X
X -- says to clear the previous list of prerequisites before
X adding the new prerequisites. Thus,
X
X .SUFFIXES :
X .SUFFIXES : .a .b
X
X can be replaced by
X
X .SUFFIXES :- .a .b
X
X however the old form still works as expected. NOTE:
X .SUFFIXES is ignored by ddmmaakkee it is used here simply as
X an example.
X
X :: When the rule operator is not modified by a second ':'
X only one set of rules may be specified for making a
X target. Multiple definitions may be used to add to the
X list of prerequisites that a target depends on. How-
X ever, if a target is multiply defined only one defini-
X tion may specify a recipe for making the target.
X
X When a target's rule operator is modified by a second
X ':' (:: for example) then this definition may not be
X the only definition with a recipe for the target.
X There may be other :: target definition lines that
X specify a different set of prerequisites with a dif-
X ferent recipe for updating the target. Any such target
X is made if any of the definitions find it to be out of
X date with respect to the related prerequisites and uses
X the corresponding recipe to update the target.
X
X In the following simple example, each rule has a `::'
X _r_u_l_e_o_p. In such an operator we call the first `:' the
X operator, and the second `:' the modifier.
X
X a.o :: a.c b.h
X first recipe for making a.o
X
X a.o :: a.y b.h
X second recipe for making a.o
X
X If a.o is found to be out of date with respect to a.c
X
X
X
XVersion 3.50 UW 15
X
X
X
X
XDMAKE(p) Unsupported Software DMAKE(p)
X
X
X
X then the first recipe is used to make a.o. If it is
X found out of date with respect to a.y then the second
X recipe is used. If a.o is out of date with respect to
X b.h then both recipes are invoked to make a.o. In the
X last case the order of invocation corresponds to the
X order in which the rule definitions appear in the
X makefile.
X
X Targets defined using a single `:' operator with a recipe
X may be redefined again with a new recipe by using a `:'
X operator with a `:' modifier. This is equivalent to a tar-
X get having been initially defined with a rule using a `:'
X modifier. Once a target is defined using a `:' modifier it
X may not be defined again with a recipe using only the `:'
X operator with no `:' modifier. In both cases the use of a
X `:' modifier creates a new list of prerequisites and makes
X it the current prerequisite list for the target. The `:'
X operator with no recipe always modifies the current list of
X prerequisites. Thus assuming each of the following defini-
X tions has a recipe attached, then:
X
X joe : fred ... (1)
X joe :: more ... (2)
X
X and
X
X joe :: fred ... (3)
X joe :: more ... (4)
X
X are legal and mean: add the recipe associated with (2), or
X (4) to the set of recipes for joe, placing them after exist-
X ing recipes for making joe. The construct:
X
X joe :: fred ... (5)
X joe : more ... (6)
X
X and
X
X joe : fred ... (7)
X joe : more ... (8)
X
X are errors since we have two sets of perfectly good recipes
X for making the target.
X
X _p_r_e_r_e_q_u_i_s_i_t_e_s is a possibly empty list of targets that must
X be brought up to date before making the current target.
X
X _r_e_c_i_p_e is a short form and allows the user to specify short
X rule definitions on a single line. It is taken to be the
X first recipe line in a larger recipe if additional lines
X follow the rule definition. If the semi-colon is present
X but the recipe line is empty (ie. null string) then it is
X
X
X
XVersion 3.50 UW 16
X
X
X
X
XDMAKE(p) Unsupported Software DMAKE(p)
X
X
X
X taken to be an empty rule. Any target so defined causes the
X _D_o_n_'_t _k_n_o_w _h_o_w _t_o _m_a_k_e _._._. error message to be suppressed
X when ddmmaakkee tries to make the target and fails. This silence
X is maintained for rules that are terminated by a semicolon
X and have no following recipe lines, for targets listed on
X the command line, and for the first target found in the
X makefile.
X
XRREECCIIPPEESS
X The traditional format used by most versions of Make defines
X the recipe lines as arbitrary strings that may contain macro
X expansions. They follow a rule definition line and may be
X spaced apart by comment or blank lines. The list of recipe
X lines defining the recipe is terminated by a new target
X definition, a macro definition, or end-of-file. Each recipe
X line MMUUSSTT begin with a <<TTAABB>> character which may optionally
X be followed with one or both of the characters _'_-_@_'. The
X _'_-_' indicates that non-zero exit values (ie. errors) are to
X be ignored when this recipe line is executed, and the _'_@_'
X indicates that the recipe line should NOT be echoed to the
X terminal prior to being executed. Both switches are off by
X default (ie. by default, errors are significant and commands
X are echoed). Global settings activated via command line
X options or special attribute or target names may also affect
X these settings. An example recipe:
X
X target :
X first recipe line
X second recipe line, executed independently of the first.
X @a recipe line that is not echoed
X -and one that has errors ignored.
X
X The second and new format of the recipe block begins the
X block with the character '[' (the open group character) in
X the last non-white space position of a line, and terminates
X the block with the character ']' (the close group character)
X in the first non-white space position of a line. In this
X form each recipe line need not have a leading TAB. This is
X called a recipe group. Groups so defined are fed intact as
X a single unit to a shell for execution whenever the
X corresponding target needs to be updated. If the open group
X character '[' is preceded by one or both of - or @ then they
X apply to the entire group in the same way that the - and @
X apply to single recipe lines. See the MAKING TARGETS sec-
X tion for a description of how ddmmaakkee invokes recipes. Here
X is an example of a group recipe:
X
X target :
X [
X first recipe line
X second recipe line
X all of these recipe lines are fed to a
X
X
X
XVersion 3.50 UW 17
X
X
X
X
XDMAKE(p) Unsupported Software DMAKE(p)
X
X
X
X single copy of a shell for execution.
X ]
X
X
XTTEEXXTT DDIIVVEERRSSIIOONNSS
X ddmmaakkee supports the notion of text diversions in recipes. If
X a recipe line contains the character sequence <<++ it is
X recognized and a text diversion is started. This causes
X ddmmaakkee to open a temporary file and to copy into that file
X all text that is found up to but not including the text
X diversion termination sequence ++>>. Any diversions started
X with a <<++ must be terminated with a corresponding ++>>; the
X terminating ++>> may appear on the same or on a subsequent
X recipe line. Nesting of diversions is not supported.
X New-lines provided in the recipe that forms the text of a
X diversion are inserted into the resulting temporary file at
X the appropriate locations. The diversion text may contain
X the same escape codes as those described in the MACROS sec-
X tion.
X
X The primary use of diversions is on systems (like MSDOS)
X that do not support long command lines. The diversion makes
X it possible to produce a temporary file containing the argu-
X ments which can then be supplied to a utility via the tem-
X porary file.
X
X Here are some examples:
X
X all:
X cat <+this is a
X test of the text diversion+>
X
X The above will cause ddmmaakkee to execute the command:
X
X cat /tmp/mk12294AA
X
X and the contents of the temporary file will be the text
X found between the <<++ and ++>> strings of the above recipe.
X
X OBJ = fred.obj mary.obj joe.obj
X all : $(OBJ)
X link @<+$(^:t"+\n")\n+>
X
X The result of making `all' in the second example is the com-
X mand:
X
X link @/tmp/mk02394AA
X
X where the temporary file contains:
X
X fred.obj+
X mary.obj+
X
X
X
XVersion 3.50 UW 18
X
X
X
X
XDMAKE(p) Unsupported Software DMAKE(p)
X
X
X
X joe.obj
X
X The last line of the file is terminated by a new-line which
X is inserted due to the \n placed immediately before the ++>>
X text diversion terminator.
X
X If the environment variable TMPDIR is defined then the tem-
X porary file is created in the directory specified by that
X variable. A makefile can change where temporary files are
X created by defining a macro named TMPDIR and exporting it
X using the .EXPORT special target.
X
XSSPPEECCIIAALL TTAARRGGEETTSS
X This section describes the special targets that are recog-
X nized by ddmmaakkee. Some are affected by attributes and others
X are not.
X
X ..EERRRROORR If defined then the recipe associated with
X this target is executed whenever an error con-
X dition is detected by ddmmaakkee. All attributes
X that can be used with any other target may be
X used with this target. Any prerequisites of
X this target will be brought up to date during
X it's processing. NOTE: errors will be
X ignored while making this target, in extreme
X cases this may cause some problems.
X
X ..EEXXPPOORRTT All prerequisites associated with this target
X are assumed to correspond to macro names and
X they and their values are exported to the
X environment as environment strings at the
X point in the makefile at which this target
X appears. Any attributes specified with this
X target are ignored. Only macros which have
X been assigned a value in the makefile prior to
X the export directive are exported, macros as
X yet undefined are not exported.
X
X ..IIMMPPOORRTT Prerequisite names specified for this target
X are searched for in the environment and
X defined as macros with their value taken from
X the environment. If the name cannot be found
X in the environment an error message is issued.
X .IMPORT accepts the .IGNORE attribute. When
X given, it causes ddmmaakkee to ignore the above
X error. See the MACROS section for a descrip-
X tion of the processing of imported macro
X values.
X
X ..IINNCCLLUUDDEE Parse another makefile just as if it had been
X located at the point of the .INCLUDE in the
X current makefile. The list of prerequisites
X
X
X
XVersion 3.50 UW 19
X
X
X
X
XDMAKE(p) Unsupported Software DMAKE(p)
X
X
X
X gives the list of makefiles to try to read.
X If the list contains multiple makefiles then
X they are read in order from left to right.
X The following search rules are used when try-
X ing to locate the file. If the filename is
X surrounded by " or just by itself then it is
X searched for in the current directory. If it
X is not found it is then searched for in each
X of the directories specified for the .INCLU-
X DEDIRS special target. If the file name is
X surrounded by < and >, (ie.
X <my_spiffy_new_makefile>) then it is searched
X for only in the directories given by the
X .INCLUDEDIRS special target. In both cases if
X the file name is a fully qualified name start-
X ing at the root of the file system then it is
X only searched for once, and the .INCLUDEDIRS
X list is ignored. .INCLUDE accepts the .IGNORE
X and .SETDIR attributes. If .IGNORE attribute
X is given and the file cannot be found then
X ddmmaakkee continues processing, otherwise an error
X message is generated. The .SETDIR attribute
X causes ddmmaakkee to change directories to the
X specified directory prior to attempting the
X include operation.
X
X ..IINNCCLLUUDDEEDDIIRRSS The list of prerequisites specified for this
X target defines the set of directories to
X search when trying to include a makefile.
X
X ..MMAAKKEEFFIILLEESS The list of prerequisites is the set of files
X to try to read as the default makefile. By
X default this target is defined as:
X
X .MAKEFILES : makefile.mk Makefile
X makefile
X
X
X ..SSOOUURRCCEE The prerequisite list of this target defines a
X set of directories to check when trying to
X locate a target file name. See the section on
X BINDING of targets for more information.
X
X ..SSOOUURRCCEE..ssuuffff The same as .SOURCE, except that the
X .SOURCE.suff list is searched first when try-
X ing to locate a file matching the a target
X whose name ends in the suffix .suff.
X
X ..RREEMMOOVVEE The recipe of this target is used whenever
X ddmmaakkee needs to remove intermediate targets
X that were made but do not need to be kept
X around. Such targets result from the
X
X
X
XVersion 3.50 UW 20
X
X
X
X
XDMAKE(p) Unsupported Software DMAKE(p)
X
X
X
X application of transitive closure on the
X dependency graph.
X
X In addition to the special targets above, several other
X forms of targets are recognized and are considered special,
X their exact form and use is defined in the sections that
X follow.
X
XSSPPEECCIIAALL MMAACCRROOSS
X ddmmaakkee defines a number of special macros. They are divided
X into two classes: control macros and run-time macros. The
X control macros are used by ddmmaakkee to configure it's actions,
X and are the preferred method of doing so. In the case when
X a control macro has the same function as a special target or
X attribute they share the same name as the special target or
X attribute. The run-time macros are defined when ddmmaakkee makes
X targets and may be used by the user inside recipes. We
X first give the control macros and their meanings.
X
X To use the control macros simply assign them a value just
X like any other macro. The control macros are divided into
X three groups: string valued macros, character valued macros,
X and boolean valued macros.
X
X The following are all of the string valued macros. This
X list is also divided into three groups. The first group
X gives the string valued macros that are defined internally
X and cannot be directly set by the user.
X
X DDIIRRBBRRKKSSTTRR Contains the string of chars used to terminate
X the name of a directory in a pathname. Under
X UNIX it's value is "/", under MSDOS it's value
X is "/\:".
X
X IINNCCDDEEPPTTHH This macro's value is a string of digits
X representing the current depth of makefile
X inclusion. In the first makefile level this
X value is zero.
X
X MMFFLLAAGGSS Is the list of flags that were given on the
X command line including a leading switch char-
X acter. The -f flag is not included in this
X list.
X
X MMAAKKEECCMMDD Is the name with which ddmmaakkee was invoked.
X
X MMAAKKEEDDIIRR Is the full path to the initial directory in
X which ddmmaakkee was invoked.
X
X MMAAKKEEFFIILLEE Contains the string "-f _m_a_k_e_f_i_l_e" where,
X _m_a_k_e_f_i_l_e is the name of initial user makefile
X that was first read.
X
X
X
XVersion 3.50 UW 21
X
X
X
X
XDMAKE(p) Unsupported Software DMAKE(p)
X
X
X
X MMAAKKEEFFLLAAGGSS Is the same as $(MFLAGS) but has no leading
X switch character. (ie. MFLAGS = -$(MAKEFLAGS))
X
X MMAAKKEEMMAACCRROOSS Contains the complete list of macro expres-
X sions that were specified on the command line.
X
X MMAAXXPPRROOCCEESSSSLLIIMMIITT
X Is a numeric string representing the maximum
X number of processes that ddmmaakkee can use when
X making targets in the parallel mode.
X
X NNUULLLL Is permanently defined to be the NULL string.
X This is useful when comparing a conditional
X expression to an NULL value.
X
X PPWWDD Is the full path to the current directory in
X which make is executing.
X
X TTMMDD Stands for "To Make Dir", and is the path from
X the present directory (value of $(PWD)) to the
X directory that ddmmaakkee was started up in (value
X of $(MAKEDIR)). This macro is modified when
X .SETDIR attributes are processed.
X
X
X The second group of string valued macros control ddmmaakkee
X behavior and may be set by the user.
X
X ..SSEETTDDIIRR If this macro is assigned a value then ddmmaakkee
X will change to the directory given by that
X value before making any targets. This macro
X is equivalent to the .SETDIR attribute.
X Thus the two lines:
X
X .SETDIR=fred/hello :
X
X .SETDIR := fred/hello
X
X are completely equivalent. The difference
X being that the first is processed as a rule
X definition and the other as a macro.
X
X AAUUGGMMAAKKEE If set to a non NULL value will enable the
X transformation of special meta targets to
X support special AUGMAKE inferences.
X
X DDIIRRSSEEPPSSTTRR Contains the string that is used to separate
X directory components when path names are
X constructed. It is defined with a default
X value at startup.
X
X
X
X
X
XVersion 3.50 UW 22
X
X
X
X
XDMAKE(p) Unsupported Software DMAKE(p)
X
X
X
X GGRROOUUPPFFLLAAGGSS This macro gives the set of flags to pass to
X the shell when invoking it to execute a
X group recipe. The value of the macro is the
X list of flags with a leading switch indica-
X tor. (ie. `-' under UNIX)
X
X GGRROOUUPPSSHHEELLLL This macro defines the full path to the exe-
X cutable image to be used as the shell when
X processing group recipes. This macro must
X be defined if group recipes are used. It is
X assigned a default value in the startup
X makefile. Under UNIX this value is /bin/sh.
X
X GGRROOUUPPSSUUFFFFIIXX If defined, this macro gives the string to
X use as a suffix when creating group recipe
X files to be handed to the command inter-
X preter. For example, if it is defined as
X .sh, then all temporary files created by
X ddmmaakkee will end in the suffix .sh. Under
X MSDOS if you are using command.com as your
X GROUPSHELL, then this suffix must be set to
X .bat in order for group recipes to work
X correctly.
X
X MMAAKKEE It is defined in the startup file by
X default. The string $(MAKE) is recognized
X when using the -n option for single line
X recipes. Initially this macro is defined to
X have the value "$(MAKECMD) $(MFLAGS)".
X
X MMAAKKEESSTTAARRTTUUPP This macro defines the full path to the ini-
X tial startup makefile. Use the --VV command
X line option to discover it's initial value.
X
X MMAAXXLLIINNEELLEENNGGTTHH This macro defines the maximum size of a
X single line of makefile input text. The
X size is specified as a number, the default
X value is defined internally and is shown via
X the --VV option. A buffer of this size plus 2
X is allocated for reading makefile text. The
X buffer is freed before any targets are made,
X thereby allowing files containing long input
X lines to be processed without consuming
X memory during the actual make.
X
X MMAAXXPPRROOCCEESSSS Specify the maximum number of child
X processes to use when making targets. The
X default value of this macro is "1" and it's
X value cannot exceed the value of the macro
X MAXPROCESSLIMIT. Setting the value of MAX-
X PROCESS on the command line or in the
X makefile is equivalent to supplying a
X
X
X
XVersion 3.50 UW 23
X
X
X
X
XDMAKE(p) Unsupported Software DMAKE(p)
X
X
X
X corresponding value to the -P flag on the
X command line.
X
X PPRREEPP This macro defines the number of iterations
X to be expanded automatically when processing
X % rule definitions of the form:
X
X % : %.suff
X
X See the sections on PERCENT(%) RULES for
X details on how PREP is used.
X
X SSHHEELLLL This macro defines the full path to the exe-
X cutable image to be used as the shell when
X processing single line recipes. This macro
X must be defined if recipes requiring the
X shell for execution are to be used. It is
X assigned a default value in the startup
X makefile. Under UNIX this value is /bin/sh.
X
X SSHHEELLLLFFLLAAGGSS This macro gives the set of flags to pass to
X the shell when invoking it to execute a sin-
X gle line recipe. The value of the macro is
X the list of flags with a leading switch
X indicator. (ie. `-' under UNIX)
X
X SSHHEELLLLMMEETTAASS Each time ddmmaakkee executes a single recipe
X line (not a group recipe) the line is
X searched for any occurrence of a character
X defined in the value of SHELLMETAS. If such
X a character is found the recipe line is
X defined to require a shell to ensure it's
X correct execution. In such instances a
X shell is used to invoke the recipe line. If
X no match is found the recipe line is exe-
X cuted without the use of a shell.
X
X
X There is only one character valued macro defined by ddmmaakkee:
X SSWWIITTCCHHAARR contains the switch character used to introduce
X options on command lines. On UNIX it's value is '-', on
X MSDOS it's value may be '/' or '-'. The macro is internally
X defined and is not user setable.
X
X All boolean macros currently understood by ddmmaakkee correspond
X directly to the previously defined attributes. These macros
X provide a second way to apply global attributes, and
X represent the preferred method of doing so. They are used
X by assigning them a value. If the value is not a NULL
X string then the boolean condition is set to on. If the
X value is a NULL string then the condition is set to off.
X There are five conditions defined and they correspond
X
X
X
XVersion 3.50 UW 24
X
X
X
X
XDMAKE(p) Unsupported Software DMAKE(p)
X
X
X
X directly to the attributes of the same name. Their meanings
X are defined in the ATTRIBUTES section above. The macros
X are: ..EEPPIILLOOGG, ..IIGGNNOORREE, ..PPRREECCIIOOUUSS, ..PPRROOLLOOGG, and ..SSIILLEENNTT.
X Assigning any of these a non NULL value will turn on the
X corresponding attribute on a global scale.
X
X The second class of macros is the run-time macros. These
X macros are defined when ddmmaakkee is making targets, and may
X take on different values for each target. $$@@ is defined to
X be the full target name, $$?? is the list of all out of date
X prerequisites, $$&& is the list of all prerequisites, $$>> is
X the name of the library if the current target is a library
X member, $$<< is the list of prerequisites specified in the
X current rule (this includes any inferred prerequisites), $$**
X is defined as $$((@@::ddbb)) when making targets with explicit
X recipes and is defined as the value of % when making targets
X whose recipe is the result of an inference. In the first
X case $$** is the target name with no suffix, and in the latter
X is the value of the matched % pattern from the associated
X %-rule. $$^^ expands to the set of out of date prerequisites
X taken from the current value of $$<<. In addition to these,
SHAR_EOF
echo "End of part 10"
echo "File man/dmake.p is continued in part 11"
echo "11" > s2_seq_.tmp
exit 0
More information about the Comp.sources.misc
mailing list