v18i086: zsh2.00 - The Z shell, Part03/15

Paul Falstad pfalstad at phoenix.princeton.edu
Wed Apr 24 13:03:18 AEST 1991


Submitted-by: Paul Falstad <pfalstad at phoenix.princeton.edu>
Posting-number: Volume 18, Issue 86
Archive-name: zsh2.00/part03

#!/bin/sh
# this is zsh2.00.00.shar.03 (part 3 of zsh2.00.00)
# do not concatenate these parts, unpack them in order with /bin/sh
# file zsh2.00/man/man1/zsh.1 continued
#
if test ! -r _shar_seq_.tmp; then
	echo 'Please unpack part 1 first!'
	exit 1
fi
(read Scheck
 if test "$Scheck" != 3; then
	echo Please unpack part "$Scheck" next!
	exit 1
 else
	exit 0
 fi
) < _shar_seq_.tmp || exit 1
if test ! -f _shar_wnt_.tmp; then
	echo 'x - still skipping zsh2.00/man/man1/zsh.1'
else
echo 'x - continuing file zsh2.00/man/man1/zsh.1'
sed 's/^X//' << 'SHAR_EOF' >> 'zsh2.00/man/man1/zsh.1' &&
XDo not enter command lines into the history list
Xif they are duplicates of the previous event.
X.TP
X\-\fBi\fP (\fBINTERACTIVE\fP)
XThis is an interactive shell.
X.TP
X\-\fBj\fP (\fBHISTLIT\fP)
XUse literal (unparsed) versions of the history lines
Xin the editor.
X.TP
X\-\fBk\fP (\fBINTERACTIVE_COMMENTS\fP)
XAllow comments even in interactive shells.
X.TP
X\-\fBl\fP (\fBLOGIN\fP)
XThis is a login shell.
X.TP
X\-\fBm\fP (\fBMONITOR\fP)
XAllow job control.  Set by default in interactive shells.
X.TP
X\-\fBn\fP (\fBNOEXEC\fP)
XRead commands and check them for syntax errors, but do not execute them.
X.TP
X\-\fBs\fP (\fBSHINSTDIN\fP)
XRead commands from the standard input.
X.TP
X\-\fBu\fP (\fBNOUNSET\fP)
XTreat unset parameters as an error when substituting.
X.TP
X\-\fBv\fP (\fBVERBOSE\fP)
XPrint shell input lines as they are read.
X.TP
X\-\fBx\fP (\fBXTRACE\fP)
XPrint commands and their arguments as they are executed.
X.TP
X\-\fBy\fP (\fBSH_WORD_SPLIT\fP)
XSee \fIParameter Expansion\fP.
X.TP
X\-\fB1\fP (\fBNO_CLOBBER\fP)
XPrevents \fB>\fP redirection from truncating existing files.
X\fB>!\fP may be used to truncate a file instead.
XAlso prevents \fB>>\fP from creating files.
X\fB>>!\fP may be used instead.
X.TP
X\-\fB2\fP (\fBNO_BAD_PATTERN\fP)
XIf a pattern for filename generation is badly formed,
Xleave it unchanged in the argument list instead of
Xprinting an error.
X.TP
X\-\fB3\fP (\fBNO_NOMATCH\fP)
XIf a pattern for filename generation has no matches,
Xleave it unchanged in the argument list instead of
Xprinting an error.
X.TP
X\-\fB4\fP (\fBGLOB_DOTS\fP)
XDo not require a leading . in a filename to be matched explicitly.
X.TP
X\-\fB5\fP (\fBNOTIFY\fP)
XReport the status of background jobs immediately, rather than
Xwaiting until just before printing a prompt.
X.TP
X\-\fB6\fP (\fBBGNICE\fP)
XRun all background jobs at a lower priority.  This option
Xis set by default.
X.TP
X\-\fB7\fP (\fBIGNOREEOF\fP)
XDo not exit on end-of-file.  Require the use
Xof \fBexit\fP or \fBlogout\fP instead.
X.TP
X\-\fB8\fP (\fBMARKDIRS\fP)
XAppend a trailing / to all directory
Xnames resulting from filename generation.
X.TP
X\-\fB9\fP (\fBAUTOLIST\fP)
XAutomatically list choices on an ambiguous completion.
X.TP
X\-\fB0\fP (\fBCORRECT\fP)
XTry to correct the spelling of commands.
X.TP
X\-\fBB\fP (\fBNOBEEP\fP)
XDo not beep.
X.TP
X\-\fBC\fP (\fBPRINT_EXIT_VALUE\fP)
XPrint the exit value of programs with non-zero exit status.
X.TP
X\-\fBD\fP (\fBPUSHD_TO_HOME\fP)
XHave \fBpushd\fP with no arguments act like
X\fBpushd\fP $HOME.
X.TP
X\-\fBE\fP (\fBPUSHD_SILENT\fP)
XDo not print the directory stack after \fBpushd\fP
Xor \fBpopd\fP.
X.TP
X\-\fBF\fP (\fBNOGLOB\fP)
XDisable filename generation.
X.TP
X\-\fBG\fP (\fBNULLGLOB\fP)
XIf a pattern for filename generation has no matches,
Xdelete the pattern from the argument list instead
Xof reporting an error.  Overrides \fBNONOMATCH\fP.
X.TP
X\-\fBH\fP (\fBRMSTARSILENT\fP)
XDo not query the user before executing "rm *".
X.TP
X\-\fBI\fP (\fBIGNORE_BRACES\fP)
XDo not perform brace expansion.
X.TP
X\-\fBJ\fP (\fBAUTO_CD\fP)
XIf a command is not in the hash table, and there exists an
Xexecutable directory by that name, perform the \fBcd\fP
Xcommand to that directory.
X.TP
X\-\fBK\fP (\fBNO_BANG_HIST\fP)
XDo not perform textual history substitution.  Do not
Xtreat the ! character specially.
X.TP
X\-\fBL\fP (\fBSUN_KEYBOARD_HACK\fP)
XIf a line ends with a backquote, and there are an odd number
Xof backquotes on the line, ignore the trailing backquote.
XThis is useful on some keyboards where the return key is
Xtoo small, and the backquote key lies annoyingly close to it.
X.TP
X\-\fBM\fP (\fBSINGLE_LINE_ZLE\fP)
XUse single-line command line editing instead of multi-line.
X.TP
X\-\fBN\fP (\fBAUTO_PUSHD\fP)
XMake \fBcd\fP act like \fBpushd\fP.
X.TP
X\-\fBO\fP (\fBCORRECT_ALL\fP)
XTry to correct the spelling of all arguments in a line.
X.TP
X\-\fBP\fP (\fBRC_EXPAND_PARAM\fP)
XSee \fIParameter Expansion\fP.
X.TP
X\-\fBQ\fP (\fBPATH_DIRS\fP)
XPerform a path search even on command names with slahses in them.
XThus if "/usr/local/bin" is in the user's path, and he types
X"X11/xinit", the command "/usr/local/bin/X11/xinit" will be executed
X(assuming it exists).
X.TP
X\-\fBR\fP (\fBLONG_LIST_JOBS\fP)
XList jobs in the long format by default.
X.TP
X\-\fBS\fP (\fBRECEXACT\fP)
XIn completion, recognize exact matches even
Xif they are ambiguous.
X.TP
X\-\fBT\fP (\fBCDABLEVARS\fP)
XIf the argument to a \fBcd\fP command is not a directory,
Xbut a parameter exists by the same name whose value
Xbegins with a /, try to change to the directory
Xspecified by the parameter's value.
X.TP
X\-\fBU\fP (\fBMAIL_WARNING\fP)
XPrint a warning message if a mail file has been
Xaccessed since the shell last checked.
X.TP
X\-\fBW\fP (\fBAUTO_RESUME\fP)
XTreat single word simple commands without redirection
Xas candidates for resumption of an existing job.
X.TP
X\-\fBX\fP (\fBLIST_TYPES\fP)
XWhen listing files possible completions, show the
Xtype of each file with a trailing identifying mark.
X.TP
X\-\fBY\fP (\fBMENU_COMPLETE\fP)
XOn an ambiguous completion, instead of listing possibilities,
Xinsert the first match.  Then when completion is requested
Xagain, remove the first match and insert the second match, etc.
XWhen there are no more matches, go back to the first one again.
X\fBreverse-menu-complete\fP may be used to loop through the list
Xin the other direction.
X.TP
X\-\fBZ\fP (\fBUSE_ZLE\fP)
XUse the zsh line editor.
X.RE
X.PD
X.SH "SHELL BUILTIN COMMANDS"
X.TP
X\fB\&.\fP \fIfile\fP [ \fIarg\fP ... ]
XRead and execute commands from \fIfile\fP in the current shell
Xenvironment.
XIf \fIfile\fP does not contain a slash, the shell
Xlooks in the components of \fBpath\fP to find the directory
Xcontaining \fIfile\fP.
XIf any arguments \fIarg\fP are given,
Xthey become the positional parameters; the old positional
Xparameters are restored when the \fIfile\fP is done executing.
XThe exit status is the exit status of the last command executed.
X.TP
X\fB:\fP \fIfile\fP [ \fIarg\fP ... ]
XThis command only expands parameters.  A zero exit code is returned.
X.TP
X\fBalias\fP [ \-\fBg\fP ] [ \fIname\fP[=\fIvalue\fP] ] ...
XWith no arguments, print the list of aliases in the form
X\fIname\fP=\fBvalue\fP on the standard output.
XFor each \fIname\fP with a corresponding \fIvalue\fP, define an alias 
Xwith that value.
XA trailing space in \fIvalue\fP causes the next
Xword to be checked for alias substitution.
XIf the \-\fBg\fP flag is present, define a global alias; global aliases
Xare expanded even if they do not occur in command position.
XFor each \fIname\fP with no \fIvalue\fP, print the value of \fIname\fP,
Xif any.
XThe exit status is nonzero if a \fIname\fP (with no \fIvalue\fP)
Xgiven for which no alias has been defined.
X.TP
X\fBautoload\fP [ \fIname\fP ... ]
XFor each of the \fIname\fPs (which are names of functions),
Xcreate a function marked undefined.
XThe \fBfpath\fP variable will be searched to find the
Xactual function definition when the function is first referenced.
X.TP
X.PD 0
X\fBbg\fP [ \fIjob\fP ... ]
X.TP
X\fIjob\fP ... \fB&\fP
X.PD
XPut each specified \fIjob\fP in the background,
Xor the current job if none is specified.
X.TP
X.PD 0
X\fBbindkey\fP \-\fBevd
X.TP
X\fBbindkey\fP \-\fBr\fP \fIin-string\fP ...
X.TP
X\fBbindkey\fP [ \-\fBa\fP ] \fIin-string\fP [ \fIcommand\fP ] ...
X.TP
X\fBbindkey\fP \-\fBs\fP [ \-\fBa\fP ] \fIin-string\fP \fIout-string\fP ...
X.PD
XIf one of the \-\fBe\fP, \-\fBv\fP, or \-\fBd\fP options is given,
Xreset the keymaps for emacs mode, vi mode, or the default mode,
Xrespectively.
XIf the \-\fBr\fP option is given, remove any binding for each \fIin-string\fP.
XIf the \-\fBs\fP option is not specified, bind each \fIin-string\fP
Xto a specified \fIcommand\fP.  If no \fIcommand\fP is specified,
Xprint the binding of \fIin-string\fP if it is bound, or return
Xa nonzero exit code if it is not bound.
XIf the \-\fBs\fP option is specified, bind each \fIin-string\fP
Xto each specified \fIout-string\fP.  When \fIin-string\fP is typed,
X\fIout-string\fP will be pushed back and treated as input to the
Xline editor.
XIf the \-\fBa\fP option is specified, bind the \fIin-string\fPs in the
Xalternative keymap instead of the standard one.  The alternative
Xkeymap is used in vi command mode.
X.RS
X.PP
XFor either \fIin-string\fP or \fIout-string\fP, control characters
Xmay be specified in the form \fB^X\fP, and the backslash may
Xbe used to introduce one of the following escape sequences:
X.RS
X.PD 0
X.TP
X.B \ea
Xbell character
X.TP
X.B \en
Xlinefeed (newline)
X.TP
X.B \eb
Xbackspace
X.TP
X.B \et
Xhorizontal tab
X.TP
X.B \ev
Xvertical tab
X.TP
X.B \ef
Xform feed
X.TP
X.B \er
Xcarriage return
X.TP
X.B \ee
Xescape
X.TP
X.B \ennn
Xcharacter code in octal
X.TP
X.B \eM\-xxx
Xcharacter or escape sequence with meta bit set
X.PD
X.PP
X.RE
XIn all other cases, \e escapes the following character.  Delete is
Xwritten as `\fB^?\fP'.
X.RE
X.TP
X\fBbreak\fP [ \fIn\fP ]
XExit from an enclosing \fBfor\fP, \fBwhile\fP,
X\fBuntil\fP, \fBselect\fP, or \fBrepeat\fP loop.  If \fIn\fP
Xis specified, then break \fIn\fP levels instead of just one.
X.TP
X\fBbye\fP
XSame as \fBexit\fP.
X.TP
X.PD 0
X\fBcd\fP [ \fIarg\fP ]
X.TP
X\fBcd\fP \fIold\fP \fInew\fP
X.TP
X\fBcd\fP \(+-\fBn\fP
X.PD
XChange the current directory.  In the first form, change the
Xcurrent directory to \fIarg\fP, or to the value of \fBHOME\fP if
X\fIarg\fP is not specified.  If \fIarg\fP is \-, change to the
Xvalue of \fBOLDPWD\fP, the previous directory.
XIf a directory named \fIarg\fP is not found in the current directory
Xand \fIarg\fP does not contain a slash,
Xsearch each component of the shell parameter \fBcdpath\fP.
XIf the option \fBCDABLEVARS\fP is set, and a parameter named \fIarg\fP
Xexists whose value begins with a slash, treat its value as
Xthe directory.
X.RS
X.PP
XThe second form of \fBcd\fP substitutes the string \fInew\fP
Xfor the string \fIold\fP in the name of the current directory,
Xand tries to change to this new directory.
X.PP
XThe third form of \fBcd\fP is equivalent to \fBpopd\fP.
X.RE
X.TP
X\fBchdir\fP
XSame as \fBcd\fP.
X.TP
X\fBcontinue\fP [ \fInum\fP ]
XResume the next iteration of the enclosing
X\fBfor\fP, \fBwhile\fP, \fBuntil\fP, \fBselect\fP, or
X\fBrepeat\fP loop.  If \fIn\fP is specified, break out of
X\fIn\fP \- 1 loops and resume at the \fIn\fPth enclosing loop.
X.TP
X\fBdeclare\fP [ \fIarg\fP ... ]
XSame as \fBtypeset\fP.
X.TP
X\fBdirs\fP [ \-\fBv\fP ] [ \fIarg\fP ... ]
XWith no arguments, print the contents of the directory stack.
XIf the \-\fBv\fP option is given, number the directories
Xin the stack when printing.
XDirectories are added to this stack with the \fBpushd\fP command,
Xand removed with the \fBcd\fP or \fBpopd\fP commands.
XIf arguments are specified, load them onto the directory stack,
Xreplacing anything that was there, and push the current directory
Xonto the stack.
X.TP
X\fBdisable\fP \fIarg\fP ...
XDisable the builtin \fIarg\fP temporarily.  This allows you to use
Xan external command with the same name as a shell builtin.
XActually the same as \fBunhash\fP.
XBuiltins can be enabled with the \fBenable\fP command.
X.TP
X\fBdisown\fP \fIjob\fP ...
XRemove the specified jobs from the job table; the shell will
Xno longer report their status, and will not complain if you
Xtry to exit an interactive shell with them running or stopped.
X.TP
X\fBecho\fP [ \-\fBn\fP ] [ \fIarg\fP ... ]
XWrite each \fIarg\fP on the standard output, with a space separating
Xeach one.
XIf the \-\fBn\fP flag is not present, print a newline at the end.
X\fBecho\fP recognizes the following escape sequences:
X.RS
X.PD 0
X.TP
X.B \eb
Xbackspace
X.TP
X.B \ec
Xdon't print an ending newline
X.TP
X.B \ef
Xform feed
X.TP
X.B \en
Xnewline
X.TP
X.B \er
Xcarriage return
X.TP
X.B \et
Xhorizontal tab
X.TP
X.B \ev
Xvertical tab
X.TP
X.B \e\e
Xbackslash
X.TP
X.B \exxx
Xcharacter code in octal
X.PD
X.RE
X.TP
X\fBechotc\fP \fIcap\fP [ \fIarg\fP ... ]
XOutput the termcap string corresponding to the capability
X\fIcap\fP, with optional arguments.
X.TP
X\fBenable\fP \fIarg\fP ...
XEnable the specified builtin commands, presumably disabled earlier
Xwith \fBdisable\fP.
X.TP
X\fBeval\fP [ \fIarg\fP ... ]
XRead the arguments as input to the shell and execute the resulting
Xcommand(s) in the current shell process.
X.TP
X\fBexit\fP [ \fIn\fP ]
XExit the shell with the exit code specified by \fIn\fP; if none
Xis specified, use the exit code from the last command executed.
XAn EOF condition will also cause the shell to exit, unless
Xthe \fBIGNOREEOF\fP option is set.
X.TP
X\fBexport\fP [ \fIname\fP[=\fIvalue\fP] ... ]
XThe specified \fIname\fPs are marked for automatic export
Xto the environment of subsequently executed commands.
X.TP
X\fBfalse\fP
XDo nothing and return an exit code of 1.
X.TP
X\fBfc\fP [ \-\fBe\fP \fIename\fP ] [ \-\fBnlr\fP ] [ \fIold\fP=\fInew\fP ... ] [ \fIfirst\fP [ \fIlast\fP ] ]
XSelect a range of commands from \fIfirst\fP to \fIlast\fP from the
Xhistory list.
XThe arguments \fIfirst\fP and \fIlast\fP may be specified as a
Xnumber or as a string.  A negative number is used as an offset
Xto the current history event number.
XA string specifies the most recent event
Xbeginning with the given string.
XAll substitutions \fIold\fP=\fInew\fP, if any, are then performed
Xon the commands.
XIf the \-\fBl\fP flag is given, the resulting commands are listed on
Xstandard output.
XOtherwise the editor program \fIename\fP is invoked on a file containing
Xthese history events.  If \fIename\fP is not given, the value
Xof the parameter \fBFCEDIT\fP is used.  If \fIename\fP is "\-",
Xno editor is invoked.  When editing is complete, the edited
Xcommand(s) is executed.  
XIf \fIfirst\fP is not specified, it will be set to \-1 (the most recent
Xevent), or to -16 if the \-\fBl\fP flag is given.
XIf \fIlast\fP is not specified, it will be set to \fIfirst\fP,
Xor to \-1 if the \-\fBl\fP flag is given.
XThe flag \-\fBr\fP reverses the order of the commands and the
Xflag \-\fBn\fP suppresses command numbers when listing.
X.TP
X.PD 0
X\fBfg\fP [ \fIjob\fP ... ]
X.TP
X\fIjob\fP ...
X.PD
XBring the specfied \fIjob\fPs to the foreground.
XIf no \fIjob\fP is specified, use the current job.
X.TP
X\fBfunctions\fP [ \(+-\fBtu\fP ] [ \fIname\fP ... ]
XEquivalent to \fBtypeset\fP \-\fBf\fP.
X.TP
X\fBgetln\fP \fIname\fP ...
XRead the top value from the buffer stack and put it in
Xthe shell parameter \fIname\fP.  Equivalent to
X\fBread\fP \-\fBzr\fP.
X.TP
X\fBgetopts\fP \fIoptstring\fP \fIname\fP [ \fIarg\fP ... ]
XChecks \fBarg\fP for legal options.  If \fIarg\fP is omitted,
Xuse the positional parameters.  A valid option argument
Xbegins with a + or a \-.  An argument not beginning with
Xa + or a \-, or the argument \-\-, ends the options.
X\fIoptstring\fP contains the letters that \fBgetopts\fP
Xrecognizes.  If a letter is followed by a `:', that option
Xis expected to have an argument.  The options can be
Xseparated from the argument by blanks.
X.RS
X.PP
XEach time it is invoked, \fBgetopts\fP places the option letter it finds
Xin the shell parameter \fIname\fP, prepended with a + when
X\fIarg\fP begins with a +.  The index of the next \fIarg\fP
Xis stored in \fBOPTIND\fP.  The option argument, if any,
Xis stored in \fBOPTARG\fP.
X.PP
XA leading : in \fIoptstring\fP causes \fBgetopts\fP to store the
Xletter of the invalid option in \fBOPTARG\fP, and to set \fIname\fP
Xto `?' for an unknown option and to `:' when a required option
Xis missing.  Otherwise, \fBgetopts\fP prints an error
Xmessage.  The exit status is nonzero when there are no more options.
X.RE
X.TP
X\fBhash\fP \fIname\fP \fIpath\fP
XPuts \fIname\fP in the command hash table, associating it with
Xthe pathname \fIpath\fP.  Whenever \fIname\fP is used as a command
Xargument, the shell will try to execute the file given by \fIpath\fP.
X.TP
X\fBhistory\fP [ \-\fBnr\fP ] [ \fIfirst\fP [ \fIlast\fP ] ]
XSame as \fBfc\fP \-\fBl\fP.
X.TP
X\fBinteger\fP
XSame as \fBtypeset\fP \-\fBi\fP.
X.TP
X\fBjobs\fP [ \-\fBlp\fP ] [ \fIjob\fP ... ]
XLists information about each given job, or all jobs
Xif \fIjob\fP is omitted.  The \-\fBl\fP flag lists process
Xids, and the \-\fBp\fP flag lists process groups.
X.TP
X.PD 0
X\fBkill\fP [ \-\fIsig\fP ] \fIjob\fP ...
X.TP
X\fBkill\fP \-\fBl\fP
X.PD
XSends either SIGTERM or the specified signal to the given
Xjobs or processes.
XSignals are given by number or by names
X(with the prefix "SIG" removed).
XIf the signal being sent is not KILL or CONT, then the job
Xwill be sent a CONT signal if it is stopped.
XThe argument \fIjob\fP can be the process id of a job
Xnot in the job list.
XIn the second form, \fBkill\fP \-\fBl\fP, the signal names
Xare listed.
X.TP
X\fBlet\fP \fIarg\fP ...
XEvaluate each \fIarg\fP as an arithmetic expression.
XSee \fBARITHMETIC EVALUATION\fP above for a description
Xof arithmetic expressions.  The exit status is 0 if the
Xvalue of the last expression is nonzero, and 1 otherwise.
X.TP
X.PD 0
X\fBlimit\fP [ \-\fBh\fP ] [ \fIresource\fP [ \fIlimit\fP ] ] ...
X.TP
X\fBlimit\fP \-\fBs\fP
X.PD
XLimit the resource consumption of children of the current shell.
XIf \fIlimit\fP is not specified, print the current limit placed
Xon \fIresource\fP; otherwise
Xset the limit to the specified value.  If the \-\fBh\fP flag
Xis given, use hard limits instead of soft limits.
XIf no \fIresource\fP is given, print all limits.
X.RS
X.PP
X\fIresource\fP is one of:
X.PP
X.PD 0
X.TP
X.B cputime
XMaximum CPU seconds per process.
X.TP
X.B filesize
XLargest single file allowed.
X.TP
X.B datasize
XMaximum data size (including stack) for each process.
X.TP
X.B stacksize
XMaximum stack size for each process.
X.TP
X.B coredumpsize
XMaximum size of a core dump.
X.TP
X.B resident
XMaximum resident set size.
X.TP
X.B descriptors
XMaximum value for a file descriptor.
X.PD
X.PP
X\fIlimit\fP is a number, with an optional scaling factor, as follows:
X.PP
X.PD 0
X.TP
X\fIn\fPh
Xhours.
X.TP
X\fIn\fPk
Xkilobytes. 
XThis is the default for all but cputime.
X.TP
X\fIn\fPm
Xmegabytes or minutes.
X.TP
X\fImm\fP:\fBss\fP
Xminutes and seconds.
X.PD
X.RE
X.TP
X\fBlocal\fP
XSame as \fBtypeset\fP.
X.TP
X\fBlog\fP
XList all users currently logged in who are affected by
Xthe current setting of the \fBwatch\fP parameter.
X.TP
X\fBlogout\fP
XExit the shell, if this is a login shell.
X.TP
X\fBpopd\fP [ \(+-\fIn\fP ]
XRemoves entries from the directory stack.  With no arguments,
Xremoves the top directory from the stack, and performs a \fBcd\fP
Xto the new top directory.  With an argument of the form +\fIn\fP,
Xremove the \fIn\fPth entry counting from the left of the list
Xshown by the \fBdirs\fP command, starting with zero, and change
Xto that directory.  With an argument of the form \-\fIn\fP,
Xremove the \fIn\fPth entry counting from the right.
X.TP
X\fBprint\fP [ \-\fBRnrslz0\fP ] [ \fIarg\fP ... ]
XWith no flags or with flag \-, the arguments are printed on
Xthe standard output as described by \fBecho\fP.  With the
X\-\fBR\fP or \-\fBr\fP flag, the escape conventions of \fBecho\fP
Xare ignored.  The \-\fBR\fP option will print all subsequent
Xarguments and options.  The \-\fBs\fP option causes the results
Xto be placed in the history list instead of on the standard output.
XIf the \-\fBn\fP flag is given, no newline is added to the output.
XWith the \-\fBl\fP flag, the arguments are printed separated
Xby newlines instead of spaces.
XWith the \-\fB0\fP flag, the arguments are separated and terminated
Xby nulls.
XWith the \-\fBz\fP flag, the arguments are pushed onto the editing buffer
Xstack, separated by spaces; no escape sequences are recognized.
X.TP
X.PD 0
X\fBpushd\fP [ \fIarg\fP ]
X.TP
X\fBpushd\fP \fIold\fP \fInew\fP
X.TP
X\fBpushd\fP \(+-\fBn\fP
X.PD
XChange the current directory, and push the old current directory
Xonto the directory stack.  In the first form, change the
Xcurrent directory to \fIarg\fP.
XIf \fIarg\fP is not specified, change to the second directory
Xon the stack (that is, exchange the top two entries), or
Xchange to the value of \fBHOME\fP if the \fBPUSHD_TO_HOME\fP
Xoption is set or if there is only one entry on the stack.
XIf \fIarg\fP is \-, change to the
Xvalue of \fBOLDPWD\fP, the previous directory.
XIf a directory named \fIarg\fP is not found in the current directory
Xand \fIarg\fP does not contain a slash,
Xsearch each component of the shell parameter \fBcdpath\fP.
XIf the option \fBCDABLEVARS\fP is set, and a parameter named \fIarg\fP
Xexists whose value begins with a slash, treat its value as
Xthe directory.
XIf the option \fBPUSHD_SILENT\fP is not set, the directory
Xstack will be printed after a \fBpushd\fP is performed.
X.RS
X.PP
XThe second form of \fBpushd\fP substitutes the string \fInew\fP
Xfor the string \fIold\fP in the name of the current directory,
Xand tries to change to this new directory.
X.PP
XThe third form of \fBpushd\fP is equivalent to \fBpopd\fP.
X.RE
X.TP
X\fBpwd\fP
XEquivalent to \fBprint \-R $PWD\fP.
X.TP
X\fBr\fP
XEquivalent to \fBfc \-e \-\fP.
X.TP
X\fBread\fP [ \-\fBr\fP ] [ \fIname\fP?\fIprompt\fP ] [ \fIname\fP ...  ]
XRead one line and break it into fields using the characters
Xin \fBIFS\fP as separators.  In raw mode, \-\fBr\fP, a \e
Xat the end of a line does not signify line continuation.
XThe first field is assigned to the first \fIname\fP, the second field
Xto the second \fIname\fP, etc., with leftover
Xfields assigned to the last \fIname\fP.
XIf \fIname\fP is omitted then \fBREPLY\fP is used.
XThe exit status is 0 unless end-of-file is encountered.
XIf the first argument contains a \fB?\fP, the remainder of this
Xword is used as a \fIprompt\fP on standard error when the shell
Xis interactive.  The exit status is 0 unless an end-of-file
Xis encountered.
X.TP
X\fBreadonly\fP [ \fIname\fP[=\fIvalue\fP] ] ...
XThe given \fInames\fP are marked readonly; these names
Xcannot be changed by subsequent assignment.
X.TP
X\fBrehash\fP
XRescan the command path, rebuilding the hash table of commands.
X.TP
X\fBreturn\fP [ \fIn\fP ]
XCauses a shell function or \fB\&.\fP script to return to
Xthe invoking script
Xwith the return status specified by \fIn\fP.  If \fIn\fP
Xis omitted then the return status is that of the last command
Xexecuted.
X.TP
X.PD 0
X\fBsched\fP [+]\fIhh\fP:\fImm\fP \fIcommand\fP ...
X.TP
X\fBsched\fP [ \-\fIitem\fP ]
X.PD
XMake an entry in the scheduled list of commands to execute.
XThe time may be specified in either absolute or relative time.
XWith no arguments, prints the list of scheduled commands.
XWith the argument \-\fIitem\fP, removes the given item
Xfrom the list.
X.TP
X\fBset\fP [ \(+-\fIoptions\fP ] [ \(+-\fBo\fP \fIoption name\fP ] ... [ \-\fBA\fP \fIname\fP ] [ \fIarg\fP ] ...
XSet the options for the shell and/or set the positional parameters, or
Xdeclare an array.  For the meaning of the flags, see
X\fBOPTIONS\fP above.
XFlags may be specified by name using the \-\fBo\fP option.
XIf the \-\fBA\fP flag is specified, \fIname\fP is set to an
Xarray containing the given \fIarg\fPs.
XOtherwise the positional parameters are set.
XIf no arguments are given, then the names and values
Xof all parameters are printed on the standard output.
XIf the only argument is +, the names of all parameters are printed.
X.TP
X\fBsetopt\fP [ \(+-\fIoptions\fP ] [ \fIname\fP ... ]
XSet the options for the shell.  All options specified either
Xwith flags or by name are set.  If no arguments are supplied,
Xthe names of all options currently set are printed.
XIn option names, case is insignificant, and all underscore
Xcharacters are ignored.
X.TP
X\fBshift\fP [ \fIn\fP ]
XThe positional parameters from $\fIn\fP+\fB1\fP ... are renamed
X$\fB1\fP, where \fIn\fP is an arithmetic expression that
Xdefaults to 1.
X.TP
X\fBsource\fP
XSame as \fB.\fP.
X.TP
X\fBsuspend\fP [ \-\fBf\fP ]
XSuspend the execution of the shell (send it a \fBSIGTSTP\fP)
Xuntil it receives a \fBSIGCONT\fP.
XIf the \-\fBf\fP option is not given, complain if this is a login shell.
X.TP
X\fBtimes\fP
XPrint the accumulated user and system times for the shell
Xand for processes run from the shell.
X.TP
X\fBtrap\fP [ \fIarg\fP ] [ \fIsig\fP ] ...
X\fIarg\fP is a command to be read and executed when the shell
Xreceives \fIsig\fP.  Each \fIsig\fP can be given as a number
Xor as the name of a signal.
XIf \fIarg\fP is \-, then all traps \fIsig\fP are reset to their
Xdefault values.  If \fIarg\fP is the null string, then this signal
Xis ignored by the shell and by the commands it invokes.
XIf \fIsig\fP is \fBERR\fP then \fIarg\fP will be executed
Xafter each command.
XIf \fIsig\fP is \fB0\fP or \fBEXIT\fP
Xand the \fBtrap\fP statement is executed inside the body of a function,
Xthen the command \fIarg\fP is executed after the function completes.
XIf \fIsig\fP is \fB0\fP or \fBEXIT\fP
Xand the \fBtrap\fP statement is not executed inside the body of a function,
Xthen the command \fIarg\fP is executed when the shell terminates.
XThe \fBtrap\fP command with no arguments prints a list of commands
Xassociated with each signal.
X.TP
X\fBtrue\fP
XDo nothing and return an exit code of 0.
X.TP
X\fBtype\fP
XSame as \fBwhence\fP \-\fBv\fP.
X.TP
X\fBtypeset\fP [ \(+-\fBLRZfilrtux [\fIn\fP]] [ \fIname\fP[=\fIvalue\fP] ] ...
XSet attributes and values for shell parameters.
XWhen invoked inside a function, if \fIname\fP is not already
Xdefined, a new parameter is created which will be unset when the
Xfunction completes.
XThe following attributes are valid:
X.RS
X.PD 0
X.TP
X\-\fBL\fP
XLeft justify and remove leading blanks from \fIvalue\fP.
XIf \fIn\fP is nonzero, it defines the width of the field;
Xotherwise it is determined by the width of the value of the first
Xassignment.
XWhen the parameter is printed, it is filled on the right with
Xblanks or truncated if necessary to fit the field.
XLeading zeros are removed if the \-\fBZ\fP flag is also set.
X.TP
X\-\fBR\fP
XRight justify and fill with leading blanks.  If \fIn\fP is nonzero
Xif defines the width of the field;
Xotherwise it is determined by the width of the value of the first
Xassignment.
XWhen the parameter is printed, the field is left filled with
Xblanks or truncated from the end.
X.TP
X\-\fBZ\fP
XRight justify and fill with leading zeros if the first non-blank
Xcharacter is a digit and the \-\fBL\fP flag has not been set.
XIf \fIn\fP is nonzero it defines the width of the field;
Xotherwise it is determined by the width of the value of the
Xfirst assignment.
X.TP
X\-\fBf\fP
XThe names refer to functions rather than parameters.  No assignments
Xcan be made, and the only other valid flags are \-\fBt\fP
Xand \-\fBu\fP.  The flag \-\fBt\fP turns on execution tracing for this
Xfunction.  The flag \-\fBu\fP causes this function to be marked
Xundefined.  The \fBfpath\fP parameter will be searched to find the
Xfunction definition when the function is first referenced.
X.TP
X\-\fBi\fP
XUse an internal integer representation.  If \fBi\fP is nonzero
Xit defines the output arithmetic base, otherwise it is determined by the first
Xassignment.
X.TP
X\-\fBl\fP
XConvert to lower case.
X.TP
X\-\fBr\fP
XThe given \fIname\fPs are marked readonly.
X.TP
X\-\fBt\fP
XTags the named parameters.  Tags have no special meaning to the shell.
X.TP
X\-\fBu\fP
XConvert to upper case.
X.TP
X\-\fBx\fP
XMark for automatic export to the environment of subsequently
Xexecuted commands.
X.RE
X.PD
X.PP
XUsing + rather than \- causes these flags to be turned off.
XIf no arguments are given but flags are specified,
Xa list of named parameters which have these flags set is printed.
XUsing + instead of \- keeps their values from being printed.
XIf no arguments or options are given, the names and attributes
Xof all parameters are printed.
X.TP
X\fBulimit\fP [ \-\fBHSacdfmnt\fP ] [ \fIlimit\fP ]
XSet or display a resource limit.  The value of limit can be a number
Xin the unit specified below or the value \fBunlimited\fP.
XThe \fBH\fP and \fBS\fP flags specify whether the hard limit
Xor the soft limit for the given resource is set.
X.RS
X.PD 0
X.TP
X\-\fBa\fP
XLists all of the current resource limits.
X.TP
X\-\fBc\fP
XThe number of 512-byte blocks on the size of core dumps.
X.TP
X\-\fBd\fP
XThe number of K-bytes on the size of the data segment.
X.TP
X\-\fBf\fP
XThe number of 512-byte blocks on the size of files written.
X.TP
X\-\fBm\fP
XThe number of K-bytes on the size of physical memory.
X.TP
X\-\fBn\fP
XThe number of file descriptors.
X.TP
X\-\fBs\fP
XThe number of K-bytes on the size of the stack.
X.TP
X\-\fBt\fP
XThe number of CPU seconds to be used.
X.RE
X.PD
X.TP
X\fBumask\fP [ \fImask\fP ]
XThe umask is set to \fImask\fP.  \fImask\fP can be either
Xan octal number or a symbolic value as described in \fBchmod\fP(1).
XIf \fImask\fP is omitted, the current value is printed.
X.TP
X\fBunalias\fP \fIname\fP ...
XThe alias definition, if any, for each \fIname\fP is removed.
X.TP
X\fBunfunction\fP \fIname\fP ...
XThe function definition, if any, for each \fIname\fP is removed.
X.TP
X\fBunhash\fP \fIname\fP ...
XThe entry in the command hash table, if any, for each \fIname\fP
Xis removed.
X.TP
X\fBunlimit\fP [ \-\fBh\fP ] \fIresource\fP ...
XThe resource limit for each \fIresource\fP is set to the hard limit.
XIf the \-\fBh\fP flag is given and the shell is running as root,
Xthe hard resource limit for each \fIresource\fP is removed.
X.TP
X\fBunset\fP \fIname\fP ...
XEach named parameter is unset.
X.TP
X\fBunsetopt\fP [ \(+-\fIoptions\fP ] [ \fIname\fP ... ]
XUnset the options for the shell.  All options specified either
Xwith flags or by name are unset.
X.TP
X\fBvared\fP \fIname\fP
XThe value of the parameter \fIname\fP is loaded into the edit
Xbuffer, and the line editor is invoked.  When the editor exits,
X\fIname\fP is set to the string value returned by the editor.
X.TP
X\fBwait\fP [ \fIjob\fP ... ]
XWait for the specified \fIjob\fPs.  If \fIjob\fP is not given
Xthen all currently active child processes are waited for.
XThe exit status from this command is that of the process waited for.
X.TP
X\fBwhence\fP [ \-\fBpv\fP ] \fIname\fP ...
XFor each name, indicate how it would be interpreted if used
Xas a command name.  The \-\fBv\fP flag produces a more verbose
Xreport.  The \-\fBp\fP flag does a path search for \fIname\fP
Xeven if it is a shell function, alias, or reserved word.
X.TP
X\fBwhich\fP
XSame as \fBwhence\fP.
X.RE
X.SH INVOCATION
XUnless the \fBNO_RCS\fP option is set, commands are read
Xfrom /etc/zshrc and ~/.zshrc, in that order, if either file
Xexists.
XIf the first character of argument zero passed to the shell
Xis \-, then the shell is assumed to be a login shell, and commands
Xare read from /etc/zlogin and ~/.zlogin, if either file exists.
XIf the \-\fBs\fP flag is not present and an argument is given,
Xthe first argument is taken to be the pathname of a script to
Xexecute.  The remaining arguments are assigned to the positional
Xparameters.  The following flags are interpreted by the shell
Xwhen invoked:
X.TP
X.PD 0
X\-\fBc\fP \fIstring\fP
XRead commands from \fIstring\fP.
X.TP
X\-\fBs\fP
XRead command from the standard input.
X.TP
X\-\fBi\fP
XIf this flag is present or the shell input and output
Xare attached to a terminal, this shell is interactive.
X.PD
X.SH "SEE ALSO"
Xsh(1),
Xcsh(1),
Xtcsh(1),
Xitcsh(1),
Xrc(1),
Xbash(1),
Xash(1),
Xksh(1),
Xclam(1).
X.SH FILES
X~/.zshrc
X.br
X~/.zlogin
X.br
X~/.zlogout
X.br
X/tmp/zsh*
X.br
X/etc/zshrc
X.br
X/etc/zlogin
X.SH AUTHOR
XPaul Falstad (pfalstad at phoenix.princeton.edu)
X.SH "UNDOCUMENTED FEATURES"
XNone known, but many suspected.
XPlease mail the author if you find any.
X.SH CAVEATS
X\fBzsh\fP is available for use by CS undergraduate
Xconcentrators between the hours of 8:00am and 5:00pm, and by
Xfaculty, staff, graduate students, and special guests
Xof the Princeton University Department of Computer Science.
SHAR_EOF
echo 'File zsh2.00/man/man1/zsh.1 is complete' &&
chmod 0644 zsh2.00/man/man1/zsh.1 ||
echo 'restore of zsh2.00/man/man1/zsh.1 failed'
Wc_c="`wc -c < 'zsh2.00/man/man1/zsh.1'`"
test 97988 -eq "$Wc_c" ||
	echo 'zsh2.00/man/man1/zsh.1: original size 97988, current size' "$Wc_c"
rm -f _shar_wnt_.tmp
fi
# ============= zsh2.00/scripts/aproto ==============
if test ! -d 'zsh2.00/scripts'; then
    echo 'x - creating directory zsh2.00/scripts'
    mkdir 'zsh2.00/scripts'
fi
if test -f 'zsh2.00/scripts/aproto' -a X"$1" != X"-c"; then
	echo 'x - skipping zsh2.00/scripts/aproto (File already exists)'
	rm -f _shar_wnt_.tmp
else
> _shar_wnt_.tmp
echo 'x - extracting zsh2.00/scripts/aproto (Text)'
sed 's/^X//' << 'SHAR_EOF' > 'zsh2.00/scripts/aproto' &&
X#! /bin/sh
X# yes I know this is a hack, but I did it in vi in 3 sec.
X#
Xfproto builtin.c >builtin.pro
Xfproto cond.c >cond.pro
Xfproto exec.c >exec.pro
Xfproto glob.c >glob.pro
Xfproto hist.c >hist.pro
Xfproto init.c >init.pro
Xfproto jobs.c >jobs.pro
Xfproto lex.c >lex.pro
Xfproto loop.c >loop.pro
Xfproto math.c >math.pro
Xfproto mem.c >mem.pro
Xfproto params.c >params.pro
Xfproto subst.c >subst.pro
Xfproto table.c >table.pro
Xfproto text.c >text.pro
Xfproto utils.c >utils.pro
Xfproto watch.c >watch.pro
Xfproto zle_bindings.c >zle_bindings.pro
Xfproto zle_emacs.c >zle_emacs.pro
Xfproto zle_main.c >zle_main.pro
Xfproto zle_refresh.c >zle_refresh.pro
Xfproto zle_tricky.c >zle_tricky.pro
Xfproto zle_utils.c >zle_utils.pro
Xfproto zle_vi.c >zle_vi.pro
Xfproto parse.y >parse.pro
SHAR_EOF
chmod 0644 zsh2.00/scripts/aproto ||
echo 'restore of zsh2.00/scripts/aproto failed'
Wc_c="`wc -c < 'zsh2.00/scripts/aproto'`"
test 761 -eq "$Wc_c" ||
	echo 'zsh2.00/scripts/aproto: original size 761, current size' "$Wc_c"
rm -f _shar_wnt_.tmp
fi
# ============= zsh2.00/scripts/fproto ==============
if test -f 'zsh2.00/scripts/fproto' -a X"$1" != X"-c"; then
	echo 'x - skipping zsh2.00/scripts/fproto (File already exists)'
	rm -f _shar_wnt_.tmp
else
> _shar_wnt_.tmp
echo 'x - extracting zsh2.00/scripts/fproto (Text)'
sed 's/^X//' << 'SHAR_EOF' > 'zsh2.00/scripts/fproto' &&
X#! /bin/sh
X# prototype generator
Xsed -n '/\/\*\*\/$/{N;s/^\([^(]*\).*\/\*\*\/.\(.*\)/\1 DCLPROTO((\2))/p;}' $1 | sed -e 's/;/,/g' -e 's/,))$/));/' -e 's/(({))$/((void));/'
X
SHAR_EOF
chmod 0644 zsh2.00/scripts/fproto ||
echo 'restore of zsh2.00/scripts/fproto failed'
Wc_c="`wc -c < 'zsh2.00/scripts/fproto'`"
test 173 -eq "$Wc_c" ||
	echo 'zsh2.00/scripts/fproto: original size 173, current size' "$Wc_c"
rm -f _shar_wnt_.tmp
fi
# ============= zsh2.00/src/buildzsh ==============
if test ! -d 'zsh2.00/src'; then
    echo 'x - creating directory zsh2.00/src'
    mkdir 'zsh2.00/src'
fi
if test -f 'zsh2.00/src/buildzsh' -a X"$1" != X"-c"; then
	echo 'x - skipping zsh2.00/src/buildzsh (File already exists)'
	rm -f _shar_wnt_.tmp
else
> _shar_wnt_.tmp
echo 'x - extracting zsh2.00/src/buildzsh (Text)'
sed 's/^X//' << 'SHAR_EOF' > 'zsh2.00/src/buildzsh' &&
X#! /bin/sh
Xecho please wait
Xexec >config.h
Xcat <<'foo'
X/* this file is created automatically by buildzsh */
X
Xfoo
Xecho '/* define this if you have struct termios */'
Xif test -f /usr/include/sys/termios.h
Xthen echo '#define TERMIOS'
Xelse echo '/* #define TERMIOS */'
Xfi
Xecho
Xecho '/* define this if you have struct termio */'
Xif test -f /usr/include/sys/termio.h
Xthen echo '#define TERMIO'
Xelse echo '/* #define TERMIO */'
Xfi
Xecho
Xecho '/* define this if you have a host field in utmp */'
Xif grep ut_host /usr/include/utmp.h >/dev/null
Xthen echo '#define UTMP_HOST'
Xelse echo '/* #define UTMP_HOST */'
Xfi
Xecho
Xecho '/* define this if you have WAITPID */'
Xif man 2 wait | sed 's/_//g' | grep waitpid >/dev/null
Xthen echo '#define WAITPID'
Xelse echo '/* #define WAITPID */'
Xfi
Xecho
Xecho '/* define this if your signal handlers return void */'
Xif grep SIG_DFL /usr/include/signal.h /usr/include/sys/signal.h |
X	grep void >/dev/null
Xthen echo '#define SIGVOID'
Xelse echo '/* #define SIGVOID */'
Xfi
Xecho
Xecho '/* define this if you have sigvec */'
Xif grep 'struct.*sigvec' /usr/include/signal.h /usr/include/sys/signal.h >/dev/null
Xthen echo '#define SIGVEC'
Xelse echo '/* #define SIGVEC */'
Xfi
Xecho
Xecho '/* define this if signal handlers need to be reset each time */'
Xif grep SIGTSTP /usr/include/signal.h /usr/include/sys/signal.h >/dev/null
Xthen echo '/* #define RESETHANDNEEDED */'
Xelse echo '#define RESETHANDNEEDED'
Xfi
Xecho
Xcat <<'foo'
X#ifdef SIGVOID
X#define HANDTYPE void
X#else
X#define HANDTYPE int
X#define INTHANDTYPE
X#endif
X
X/* a string corresponding to the host type */
Xfoo
Xecho '#define HOSTTYPE "' | tr -d '\012'
X( tcsh -c 'echo $HOSTTYPE' || arch || echo unknown ) 2>/dev/null |
X	tr -d '\012'
Xecho '"'
Xecho
Xecho '/* the default editor for the fc builtin */'
Xecho '#define DEFFCEDIT "' | tr -d '\012'
Xwhich vi | tr -d '\012'
Xecho '"'
Xecho
Xif grep UTMP_FILE /usr/include/utmp.h >/dev/null
Xthen :
Xelse 
Xecho '/* the path of wtmp */'
Xecho '#define WTMP_FILE "' | tr -d '\012'
Xif test -f /etc/wtmp
Xthen echo /etc/wtmp
Xelif test -f /usr/etc/wtmp
Xthen echo /usr/etc/wtmp
Xelif test -f /var/adm/wtmp
Xthen echo /var/adm/wtmp
Xelif test -f /usr/adm/wtmp
Xthen echo /usr/adm/wtmp
Xelse echo /dev/null
Xfi | tr -d '\012'
Xecho '"
X
X/* the path of utmp */
X#define UTMP_FILE "/etc/utmp"
X'
Xfi
Xcat <<'foo'
X/* the path of zsh in the file system */
X#define MYSELF "/usr/local/bin/zsh"
X
X/* define if you prefer "suspended" to "stopped" */
X#define USE_SUSPENDED
X
X/* the file to source whenever zsh is run; if undefined, don't source
X	anything */
X#define GLOBALZSHRC "/etc/zshrc"
X
X/* the file to source whenever zsh is run as a login shell; if
X	undefined, don't source anything */
X#define GLOBALZLOGIN "/etc/zlogin"
X
X/* the default HISTSIZE */
X#define DEFAULT_HISTSIZE 128
X
X/* define if you like interactive comments */
X/*#define INTERACTIVE_COMMENTS*/
X
X#define _BSD_SIGNALS   /* this could be an iris, you never know */
Xfoo
Xexec 1>&2
Xecho `csh -c 'kill -l'` | tr ' ' '\012' >signals.h
Xlct=`wc -l < signals.h`
Xcp signals.h signams.h
Xecho '1,$s/^/SIG/
X/SIGHUP/s//hangup/
X/SIGINT/s//interrupt/
X/SIGQUIT/s//quit/
X/SIGILL/s//illegal instruction/
X/SIGTRAP/s//trace trap/
X/SIGIOT/s//IOT instruction/
X/SIGABRT/s//abort/
X/SIGEMT/s//EMT instruction/
X/SIGFPE/s//floating point exception/
X/SIGKILL/s//killed/
X/SIGBUS/s//bus error/
X/SIGSEGV/s//segmentation fault/
X/SIGSYS/s//bad system call/
X/SIGPIPE/s//broken pipe/
X/SIGTERM/s//terminated/
X/SIGPWR/s//power fail/
X/SIGVTALRM/s//virtual time alarm/
X/SIGCONT/s//continued/
X/SIGXCPU/s//cpu limit exceeded/
X/SIGXFSZ/s//filesize limit exceeded/
X1,$s/.*/	"&",/
X$a
X	NULL
X};
X
Xchar *sigs[SIGCOUNT+4] = {
X	"EXIT",
X.
X1i
X/* this file is created automatically by buildzsh */
X/* if all this is wrong, blame csh ;-) */
X
X#define SIGCOUNT '"$lct"'
X
X#ifdef GLOBALS
X
Xchar *sigmsg[SIGCOUNT+2] = {
X	"done",
X.
Xw
Xq' | ed signals.h
Xif grep SIGSTOP signals.h >/dev/null
Xthen ed signals.h <<'foo'
X/SIGSTOP/c
X#ifdef USE_SUSPENDED
X	"suspended (signal)",
X#else
X	"stopped (signal)",
X#endif
X.
X/SIGTSTP/c
X#ifdef USE_SUSPENDED
X	"suspended",
X#else
X	"stopped",
X#endif
X.
X/SIGTTIN/c
X#ifdef USE_SUSPENDED
X	"suspended (tty input)",
X#else
X	"stopped (tty input)",
X#endif
X.
X/SIGTTOU/c
X#ifdef USE_SUSPENDED
X	"suspended (tty output)",
X#else
X	"stopped (tty output)",
X#endif
X.
Xw
Xq
Xfoo
Xfi
X(sed 's/.*/	"&",/' signams.h
Xecho '	"ERR",
X	"DEBUG",
X	NULL
X};
X
X#else
X
Xextern char *sigs[SIGCOUNT+4],*sigmsg[SIGCOUNT+2];
X
X#endif') >>signals.h
Xrm signams.h
Xexec >Makefile
Xcat <<'foo'
X#! /bin/make -f
X#
X# Makefile - rather obvious isn't it
X#
X# This file is part of zsh, the Z shell.
X#
X# zsh is free software; no one can prevent you from reading the source
X# code, or giving it to someone else.
X# 
X# This file is copyrighted under the GNU General Public License, which
X# can be found in the file called COPYING.
X# 
X# Copyright (C) 1990, 1991 Paul Falstad
X#
X# zsh is distributed in the hope that it will be useful, but
X# WITHOUT ANY WARRANTY.  No author or distributor accepts
X# responsibility to anyone for the consequences of using it or for
X# whether it serves any particular purpose or works at all, unless he
X# says so in writing.  Refer to the GNU General Public License
X# for full details.
X# 
X# Everyone is granted permission to copy, modify and redistribute
X# zsh, but only under the conditions described in the GNU General Public
X# License.   A copy of this license is supposed to have been given to you
X# along with zsh so you can know your rights and responsibilities.
X# It should be in a file named COPYING.
X# 
X# Among other things, the copyright notice and this notice must be
X# preserved on all copies.
X#
XOBJS=hist.o glob.o table.o subst.o builtin.o loop.o mem.o cond.o \
Xparse.o lex.o init.o jobs.o exec.o utils.o math.o params.o watch.o \
Xtext.o zle_main.o zle_utils.o zle_emacs.o zle_refresh.o zle_bindings.o \
Xzle_tricky.o zle_vi.o
XBINDIR=/usr/local/bin
XMANDIR=/usr/local/man/man1
X
X# debugging flags
X#CFLAGS=-g -DYYDEBUG -Wreturn-type -Wunused -Wpointer-arith
X#CC=gcc -traditional
X#YFLAGS=-d -v
X
Xfoo
Xif test -f "`which gcc`" >/dev/null
Xthen echo 'CC=gcc -traditional
XCFLAGS= -O'
Xelse echo 'CC=cc
XCFLAGS= -O'
Xfi
Xif test -f /usr/lib/libbsd.a
Xthen
Xif grep '+' /etc/passwd >/dev/null
Xthen echo 'LIBS= -lcurses -lsun -lbsd -lmalloc'
Xelse echo 'LIBS= -lcurses -lbsd -lmalloc'
Xfi
Xelif test -f /usr/lib/libtermcap.a
Xthen echo 'LIBS= -ltermcap'
Xelse echo 'LIBS= -lcurses'
Xfi
Xcat <<'foo'
X
XZSHPATH=zsh
X
X# redefine these to work around Sun make bogosity
X
X.c.o:
X	$(CC) $(CFLAGS) -c -o $*.o $<
X
X.y.o:
X	yacc $(YFLAGS) $<
X	$(CC) $(CFLAGS) -c -o $@ y.tab.c
X	rm y.tab.c
X
Xall: $(ZSHPATH)
X
X$(ZSHPATH): $(OBJS)
X	cc -o $(ZSHPATH) $(OBJS) $(LIBS) $(LFLAGS)
X	
Xtags: /tmp
X	ctags *.[cy]
X
X$(OBJS): config.h zsh.h zle.h
X
Xclean:
X	rm -f *.o zsh core 
X
Xinstall: zsh
X	install -s -m 755 zsh $(BINDIR)
X	install -m 444 zsh.1 $(MANDIR)
X
Xzsh.h: y.tab.h
Xfoo
Xexec 1>&2
Xcat <<'foo'
X
XYou may want to look at the files I just created (config.h, Makefile,
Xand signals.h) to make sure they are correct.  Or you may just want
Xto go ahead and try running make now to see what happens.
X
Xfoo
Xecho 'Shall I execute make now?' | tr -d '\012' 
Xread reply
Xecho
Xcase "$reply" in
X[yY]*) exec make ;;
Xesac
X
SHAR_EOF
chmod 0755 zsh2.00/src/buildzsh ||
echo 'restore of zsh2.00/src/buildzsh failed'
Wc_c="`wc -c < 'zsh2.00/src/buildzsh'`"
test 7127 -eq "$Wc_c" ||
	echo 'zsh2.00/src/buildzsh: original size 7127, current size' "$Wc_c"
rm -f _shar_wnt_.tmp
fi
# ============= zsh2.00/src/builtin.c ==============
if test -f 'zsh2.00/src/builtin.c' -a X"$1" != X"-c"; then
	echo 'x - skipping zsh2.00/src/builtin.c (File already exists)'
	rm -f _shar_wnt_.tmp
else
> _shar_wnt_.tmp
echo 'x - extracting zsh2.00/src/builtin.c (Text)'
sed 's/^X//' << 'SHAR_EOF' > 'zsh2.00/src/builtin.c' &&
X/*
X
X	builtin.c - builtin commands
X
X	This file is part of zsh, the Z shell.
X
X	zsh is free software; no one can prevent you from reading the source
X   code, or giving it to someone else.
X
X   This file is copyrighted under the GNU General Public License, which
X   can be found in the file called COPYING.
X
X   Copyright (C) 1990, 1991 Paul Falstad
X
X   zsh is distributed in the hope that it will be useful, but
X   WITHOUT ANY WARRANTY.  No author or distributor accepts
X   responsibility to anyone for the consequences of using it or for
X   whether it serves any particular purpose or works at all, unless he
X   says so in writing.  Refer to the GNU General Public License
X   for full details.
X
X   Everyone is granted permission to copy, modify and redistribute
X   zsh, but only under the conditions described in the GNU General Public
X   License.   A copy of this license is supposed to have been given to you
X   along with zsh so you can know your rights and responsibilities.
X   It should be in a file named COPYING.
X
X   Among other things, the copyright notice and this notice must be
X   preserved on all copies.
X
X*/
X
X#include "zsh.h"
X#include "funcs.h"
X#include <sys/errno.h>
X#include <sys/times.h>
X
X/* builtin flags */
X
X#define BINF_PLUSOPTS		1		/* +xyz legal */
X#define BINF_R					2		/* this is r (fc -e -) */
X#define BINF_PRINTOPTS		4
X#define BINF_SETOPTS			8
X#define BINF_FCOPTS		  16
X#define BINF_TYPEOPT      32
X#define BINF_TYPEOPTS	  (BINF_TYPEOPT|BINF_PLUSOPTS)
X
X/* builtin funcs */
X
Xenum xbins {
X	BIN_TYPESET,BIN_BG,BIN_FG,BIN_JOBS,
X	BIN_WAIT,BIN_DISOWN,BIN_BREAK,BIN_CONTINUE,BIN_EXIT,
X	BIN_RETURN,BIN_SHIFT,BIN_CD,BIN_POPD,BIN_PUSHD,BIN_PRINT,
X	BIN_EVAL,BIN_SCHED,
X	BIN_FC,BIN_PUSHLINE,BIN_LOGOUT,BIN_BUILTIN
X	};
X
Xstruct bincmd {
X	char *name;
X	int (*handlerfunc) DCLPROTO((char *,char **,char *,int));
X	int minargs;		/* min # of args */
X	int maxargs;		/* max # of args, or -1 for no limit */
X	int flags;			/* BINF_flags (see above) */
X	int funcid;			/* xbins (see above) for overloaded handlerfuncs */
X	char *optstr;		/* string of legal options */
X	char *defopts;		/* options set by default for overloaded handlerfuncs */
X	};
X
X/* structure for foo=bar assignments */
X
Xstruct asgment {
X	struct asgment *next;
X	char *name,*value;
X	};
X
Xstatic char *auxdata;
Xstatic int auxlen;
Xstatic int showflag = 0,showflag2 = 0;
X
Xstruct bincmd builtins[] = {
X	".",bin_dot,1,-1,0,0,NULL,NULL,
X	":",bin_colon,0,-1,0,0,NULL,NULL,
X	"alias",bin_alias,0,-1,0,0,"ga",NULL,
X	"autoload",bin_typeset,0,-1,BINF_TYPEOPTS,0,"tx","fu",
X	"bg",bin_fg,0,-1,0,BIN_BG,NULL,NULL,
X	"bindkey",bin_bindkey,0,-1,0,0,"asvedrl",NULL,
X	"break",bin_break,0,1,0,BIN_BREAK,NULL,NULL,
X	"builtin",NULL,0,0,0,BIN_BUILTIN,NULL,NULL,
X	"bye",bin_break,0,1,0,BIN_EXIT,NULL,NULL,
X	"cd",bin_cd,0,2,0,BIN_CD,NULL,NULL,
X	"chdir",bin_cd,0,2,0,BIN_CD,NULL,NULL,
X	"continue",bin_break,0,1,0,BIN_CONTINUE,NULL,NULL,
X	"declare",bin_typeset,0,-1,BINF_TYPEOPTS,0,"LRZfilrtux",NULL,
X	"dirs",bin_dirs,0,-1,0,0,"v",NULL,
X	"disable",bin_unhash,1,-1,0,0,NULL,NULL,
X	"disown",bin_fg,1,-1,0,BIN_DISOWN,NULL,NULL,
X	"echo",bin_print,0,-1,BINF_PRINTOPTS,BIN_PRINT,"n","-",
X	"echotc",bin_echotc,1,-1,0,0,NULL,NULL,
X	"enable",bin_enable,1,-1,0,0,NULL,NULL,
X	"eval",bin_eval,0,-1,0,BIN_EVAL,NULL,NULL,
X	"exit",bin_break,0,1,0,BIN_EXIT,NULL,NULL,
X	"export",bin_typeset,0,-1,BINF_TYPEOPTS,0,"LRZfilrtu","x",
X	"false",bin_let,0,0,0,0,NULL,NULL,
X	"fc",bin_fc,0,-1,BINF_FCOPTS,BIN_FC,"nlre",NULL,
X	"fg",bin_fg,0,-1,0,BIN_FG,NULL,NULL,
X	"functions",bin_typeset,0,-1,BINF_TYPEOPTS,0,"tu","f",
X	"getln",bin_read,0,-1,0,0,NULL,"zr",
X	"getopts",bin_getopts,2,-1,0,0,NULL,NULL,
X	"hash",bin_hash,2,2,0,0,"r",NULL,
X	"history",bin_fc,0,-1,0,BIN_FC,"nr","l",
X	"integer",bin_typeset,0,-1,BINF_TYPEOPTS,0,"LRZlrtux","i",
X	"jobs",bin_fg,0,-1,0,BIN_JOBS,"lp",NULL,
X	"kill",bin_kill,0,-1,0,0,NULL,NULL,
X	"let",bin_let,1,-1,0,0,NULL,NULL,
X	"limit",bin_limit,0,-1,0,0,"sh",NULL,
X	"local",bin_typeset,0,-1,BINF_TYPEOPTS,0,"LRZfilrtux",NULL,
X	"log",bin_log,0,0,0,0,NULL,NULL,
X	"logout",bin_break,0,1,0,BIN_LOGOUT,NULL,NULL,
X	"popd",bin_cd,0,2,0,BIN_POPD,NULL,NULL,
X	"print",bin_print,0,-1,BINF_PRINTOPTS,BIN_PRINT,"Rnrslz0-",NULL,
X	"pushd",bin_cd,0,2,0,BIN_PUSHD,NULL,NULL,
X	"pushln",bin_print,0,-1,BINF_PRINTOPTS,BIN_PRINT,NULL,"-nz",
X	"pwd",bin_pwd,0,0,0,0,NULL,NULL,
X	"r",bin_fc,0,-1,BINF_R,BIN_FC,"nrl",NULL,
X	"read",bin_read,0,-1,0,0,"rz",NULL,
X	"readonly",bin_typeset,0,-1,BINF_TYPEOPTS,0,"LRZfiltux","r",
X	"rehash",bin_rehash,0,0,0,0,NULL,NULL,
X	"return",bin_break,0,1,0,BIN_RETURN,NULL,NULL,
X	"sched",bin_sched,0,-1,0,0,NULL,NULL,
X	"set",bin_set,0,-1,BINF_SETOPTS|BINF_PLUSOPTS,0,"0123456789ABCDEFGHIJKLMNOPQRSTUWXYZaefghijklmnsuvxy",NULL,
X	"setopt",bin_setopt,0,-1,0,0,"0123456789BCDEFGHIJKLMNOPQRSTUWXYZaefghijklmnsuvxy",NULL,
X	"shift",bin_break,0,1,0,BIN_SHIFT,NULL,NULL,
X	"source",bin_dot,1,-1,0,0,NULL,NULL,
X	"suspend",bin_suspend,0,0,0,0,"f",NULL,
X	"times",bin_times,0,0,0,0,NULL,NULL,
X	"trap",bin_trap,0,-1,0,0,NULL,NULL,
X	"true",bin_colon,0,0,0,0,NULL,NULL,
X	"type",bin_whence,0,-1,0,0,"p","v",
X	"typeset",bin_typeset,0,-1,BINF_TYPEOPTS,0,"LRZfilrtux",NULL,
X	"ulimit",bin_ulimit,0,1,0,0,"HSacdfmnt",NULL,
X	"umask",bin_umask,0,1,0,0,NULL,NULL,
X	"unalias",bin_unalias,1,-1,0,0,NULL,NULL,
X	"unfunction",bin_unhash,1,-1,0,0,NULL,NULL,
X	"unhash",bin_unhash,1,-1,0,0,NULL,NULL,
X	"unlimit",bin_unlimit,0,-1,0,0,"h",NULL,
X	"unset",bin_unset,1,-1,0,0,NULL,NULL,
X	"unsetopt",bin_setopt,0,-1,0,1,"0123456789BCDEFGHIJKLMNOPQRSTUWXYZaefghijklmnsuvxy",NULL,
X	"vared",bin_vared,1,1,0,0,NULL,NULL,
X	"wait",bin_fg,0,-1,0,BIN_WAIT,NULL,NULL,
X	"whence",bin_whence,0,-1,0,0,"pv",NULL,
X	"which",bin_whence,0,-1,0,0,"pv",NULL,
X	NULL,NULL,0,0,0,0,NULL,NULL
X	};
X
X/* add builtins to the command hash table */
X
Xvoid addbuiltins() /**/
X{
Xstruct cmdnam *c;
Xstruct bincmd *b;
Xint t0;
X
X	for (t0 = 0, b = builtins; b->name; b++,t0++)
X		{
X		c = zcalloc(sizeof *c);
X		c->type = BUILTIN;
X		c->u.binnum = t0;
X		addhperm(b->name,c,cmdnamtab,freecmdnam);
X		}
X}
X
X/* enable */
X
Xint bin_enable(name,argv,ops,whocares) /**/
Xchar *name;char **argv;char *ops;int whocares;
X{
Xstruct cmdnam *c;
Xstruct bincmd *b;
Xint t0,ret = 0;
X
X	for (; *argv; argv++)
X		{
X		for (t0 = 0, b = builtins; b->name; b++,t0++)
X			if (!strcmp(*argv,b->name))
X				break;
X		if (!b->name)
X			{
X			zerrnam(name,"no such builtin: %s",*argv,0);
X			ret = 1;
X			}
X		else
X			{
X			c = zcalloc(sizeof *c);
X			c->type = BUILTIN;
X			c->u.binnum = t0;
X			addhperm(b->name,c,cmdnamtab,freecmdnam);
X			}
X		}
X	return ret;
X}
X
X/* :, true */
X
Xint bin_colon(name,argv,ops,whocares) /**/
Xchar *name;char **argv;char *ops;int whocares;
X{
X	return 0;
X}
X
X/* break, bye, continue, exit, logout, return, shift */
X
Xint bin_break(name,argv,ops,func) /**/
Xchar *name;char **argv;char *ops;int func;
SHAR_EOF
true || echo 'restore of zsh2.00/src/builtin.c failed'
fi
echo 'End of zsh2.00.00 part 3'
echo 'File zsh2.00/src/builtin.c is continued in part 4'
echo 4 > _shar_seq_.tmp
exit 0
--
              Paul Falstad  pfalstad at phoenix.princeton.edu
         And on the roads, too, vicious gangs of KEEP LEFT signs!
     If Princeton knew my opinions, they'd have expelled me long ago.

exit 0 # Just in case...
-- 
Kent Landfield                   INTERNET: kent at sparky.IMD.Sterling.COM
Sterling Software, IMD           UUCP:     uunet!sparky!kent
Phone:    (402) 291-8300         FAX:      (402) 291-4362
Please send comp.sources.misc-related mail to kent at uunet.uu.net.



More information about the Comp.sources.misc mailing list