v19i025: dmake - dmake version 3.7, Part04/37

Dennis Vadura dvadura at watdragon.waterloo.edu
Fri May 10 05:26:46 AEST 1991


Submitted-by: Dennis Vadura <dvadura at watdragon.waterloo.edu>
Posting-number: Volume 19, Issue 25
Archive-name: dmake/part04
Supersedes: dmake-3.6: Volume 15, Issue 52-77

---- Cut Here and feed the following to sh ----
#!/bin/sh
# this is dmake.shar.04 (part 4 of a multipart archive)
# do not concatenate these parts, unpack them in order with /bin/sh
# file dmake/dbug/dbug/dbug.p continued
#
if test ! -r _shar_seq_.tmp; then
	echo 'Please unpack part 1 first!'
	exit 1
fi
(read Scheck
 if test "$Scheck" != 4; then
	echo Please unpack part "$Scheck" next!
	exit 1
 else
	exit 0
 fi
) < _shar_seq_.tmp || exit 1
if test -f _shar_wnt_.tmp; then
sed 's/^X//' << 'SHAR_EOF' >> 'dmake/dbug/dbug/dbug.p' &&
X
X
X
X
X
X            Function  level  tracing  is  enabled  by  passing  the
X       debugger the 't' flag in the debug control string.  Figure 7
X       is  the  output  resulting  from  the  command  "factorial -
X       #t:o 3 2".
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X                                  - 9 -
X
X
X
X
X
X
X
X       DBUG User Manual                            October 29, 1986
X
X
X
X
X
X                 |   >factorial
X                 |   |   >factorial
X                 |   |   <factorial
X                 |   <factorial
X                 2
X                 |   >factorial
X                 |   |   >factorial
X                 |   |   |   >factorial
X                 |   |   |   <factorial
X                 |   |   <factorial
X                 |   <factorial
X                 6
X                 <main
X
X
X                                   Figure 7
X                              factorial -#t:o 3 2
X
X
X
X
X
X            Each entry to or return from a function is indicated by
X       '>'  for  the  entry  point  and  '<'  for  the  exit point,
X       connected by vertical bars to allow matching  points  to  be
X       easily found when separated by large distances.
X
X
X            This trace output indicates that there was  an  initial
X       call  to  factorial from main (to compute 2!), followed by a
X       single recursive call to factorial to compute 1!.  The  main
X       program  then  output  the  result  for  2!  and  called the
X       factorial  function  again  with  the  second  argument,  3.
X       Factorial  called  itself  recursively to compute 2! and 1!,
X       then returned control to main, which output the value for 3!
X       and exited.
X
X
X            Note that there is no matching entry point "main>"  for
X       the  return point "<main" because at the time the DDDDBBBBUUUUGGGG____EEEENNNNTTTTEEEERRRR
X       macro was reached in main, tracing was not enabled yet.   It
X       was  only  after  the  macro  DDDDBBBBUUUUGGGG____PPPPUUUUSSSSHHHH  was  executing that
X       tracing became enabled.  This implies that the argument list
X       should  be  processed  as  early  as possible since all code
X       preceding  the  first  call  to  DDDDBBBBUUUUGGGG____PPPPUUUUSSSSHHHH  is   essentially
X       invisible  to ddddbbbbuuuugggg (this can be worked around by inserting a
X       temporary   DDDDBBBBUUUUGGGG____PPPPUUUUSSSSHHHH((((aaaarrrrggggvvvv[[[[1111]]]]))))   immediately    after    the
X       DDDDBBBBUUUUGGGG____EEEENNNNTTTTEEEERRRR((((""""mmmmaaaaiiiinnnn"""")))) macro.
X
X
X
X
X                                  - 10 -
X
X
X
X
X
X
X
X       DBUG User Manual                            October 29, 1986
X
X
X
X            One last note, the trace output normally comes  out  on
X       the  standard error.  Since the factorial program prints its
X       result on the standard output, there is the  possibility  of
X       the  output  on  the  terminal  being  scrambled  if the two
X       streams are not synchronized.  Thus the debugger is told  to
X       write its output on the standard output instead, via the 'o'
X       flag character.   Note  that  no  'o'  implies  the  default
X       (standard  error),  a  'o'  with no arguments means standard
X       output, and a 'o' with an  argument  means  used  the  named
X       file.   I.E,  "factorial -#t:o,logfile 3 2"  would write the
X       trace output in "logfile".  Because of  UUUUNNNNIIIIXXXX  implementation
X       details,  programs usually run faster when writing to stdout
X       rather than stderr, though this is not a prime consideration
X       in this example.
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X                                  - 11 -
X
X
X
X
X
X
X
X       DBUG User Manual                            October 29, 1986
X
X
X
X       UUUUSSSSEEEE OOOOFFFF DDDDBBBBUUUUGGGG____PPPPRRRRIIIINNNNTTTT MMMMAAAACCCCRRRROOOO
X
X
X            The mechanism used to produce "printf" style output  is
X       the DDDDBBBBUUUUGGGG____PPPPRRRRIIIINNNNTTTT macro.
X
X
X            To allow selection of output from specific macros,  the
X       first  argument to every DDDDBBBBUUUUGGGG____PPPPRRRRIIIINNNNTTTT macro is a _d_b_u_g keyword.
X       When this keyword appears in the argument list  of  the  'd'
X       flag    in    a    debug    control   string,   as   in   "-
X       #d,keyword1,keyword2,...:t", output from  the  corresponding
X       macro  is enabled.  The default when there is no 'd' flag in
X       the control string is to enable output from  all  DDDDBBBBUUUUGGGG____PPPPRRRRIIIINNNNTTTT
X       macros.
X
X
X            Typically, a program will be run once, with no keywords
X       specified,  to  determine  what keywords are significant for
X       the current problem (the keywords are printed in  the  macro
X       output  line).  Then the program will be run again, with the
X       desired  keywords,  to  examine  only  specific   areas   of
X       interest.
X
X
X            The second argument to a DDDDBBBBUUUUGGGG____PPPPRRRRIIIINNNNTTTT macro is a standard
X       printf  style  format  string  and  one or more arguments to
X       print, all enclosed in parenthesis so that they collectively
X       become  a  single  macro  argument.   This  is  how variable
X       numbers of printf arguments are supported.  Also  note  that
X       no  explicit  newline  is  required at the end of the format
X       string.  As a matter of style, two or three small DDDDBBBBUUUUGGGG____PPPPRRRRIIIINNNNTTTT
X       macros  are  preferable to a single macro with a huge format
X       string.  Figure 8 shows the output for default  tracing  and
X       debug.
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X                                  - 12 -
X
X
X
X
X
X
X
X       DBUG User Manual                            October 29, 1986
X
X
X
X
X
X                 |   args: argv[2] = 3
X                 |   >factorial
X                 |   |   find: find 3 factorial
X                 |   |   >factorial
X                 |   |   |   find: find 2 factorial
X                 |   |   |   >factorial
X                 |   |   |   |   find: find 1 factorial
X                 |   |   |   |   result: result is 1
X                 |   |   |   <factorial
X                 |   |   |   result: result is 2
X                 |   |   <factorial
X                 |   |   result: result is 6
X                 |   <factorial
X                 6
X                 <main
X
X
X                                   Figure 8
X                              factorial -#d:t:o 3
X
X
X
X
X
X            The output from the DDDDBBBBUUUUGGGG____PPPPRRRRIIIINNNNTTTT  macro  is  indented  to
X       match  the  trace output for the function in which the macro
X       occurs.  When debugging  is  enabled,  but  not  trace,  the
X       output starts at the left margin, without indentation.
X
X
X            To demonstrate selection of specific macros for output,
X       figure  9  shows  the  result  when the factorial program is
X       invoked with the debug control string "-#d,result:o".
X
X
X
X                 factorial: result: result is 1
X                 factorial: result: result is 2
X                 factorial: result: result is 6
X                 factorial: result: result is 24
X                 24
X
X
X                                   Figure 9
X                           factorial -#d,result:o 4
X
X
X
X
X
X
X
X                                  - 13 -
X
X
X
X
X
X
X
X       DBUG User Manual                            October 29, 1986
X
X
X
X            It is sometimes desirable  to  restrict  debugging  and
X       trace  actions  to a specific function or list of functions.
X       This is accomplished with the  'f'  flag  character  in  the
X       debug  control  string.   Figure  10  is  the  output of the
X       factorial program  when  run  with  the  control  string  "-
X       #d:f,factorial:F:L:o".  The 'F' flag enables printing of the
X       source file name and the 'L' flag enables  printing  of  the
X       source file line number.
X
X
X
X                    factorial.c:     9: factorial: find: find 3 factorial
X                    factorial.c:     9: factorial: find: find 2 factorial
X                    factorial.c:     9: factorial: find: find 1 factorial
X                    factorial.c:    13: factorial: result: result is 1
X                    factorial.c:    13: factorial: result: result is 2
X                    factorial.c:    13: factorial: result: result is 6
X                 6
X
X
X                                   Figure 10
X                       factorial -#d:f,factorial:F:L:o 3
X
X
X
X
X
X            The output in figure 10 shows that the "find" macro  is
X       in  file  "factorial.c"  at  source  line 8 and the "result"
X       macro is in the same file at source line 12.
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X                                  - 14 -
X
X
X
X
X
X
X
X       DBUG User Manual                            October 29, 1986
X
X
X
X       SSSSUUUUMMMMMMMMAAAARRRRYYYY OOOOFFFF MMMMAAAACCCCRRRROOOOSSSS
X
X
X            This section summarizes  the  usage  of  all  currently
X       defined  macros in the _d_b_u_g package.  The macros definitions
X       are found in the user include file ddddbbbbuuuugggg....hhhh from the  standard
X       include directory.
X
X
X
X               DBUG_ENTER  Used to tell the runtime support  module
X                           the  name of the function being entered.
X                           The argument must be of type "pointer to
X                           character".   The  DBUG_ENTER macro must
X                           precede  all  executable  lines  in  the
X                           function  just  entered,  and  must come
X                           after  all  local  declarations.    Each
X                           DBUG_ENTER  macro  must  have a matching
X                           DBUG_RETURN or DBUG_VOID_RETURN macro at
X                           the  function  exit  points.  DBUG_ENTER
X                           macros   used   without    a    matching
X                           DBUG_RETURN  or  DBUG_VOID_RETURN  macro
X                           will cause  warning  messages  from  the
X                           _d_b_u_g package runtime support module.
X
X                           EX: DBUG_ENTER ("main");
X
X              DBUG_RETURN  Used at each exit point  of  a  function
X                           containing  a  DBUG_ENTER  macro  at the
X                           entry point.  The argument is the  value
X                           to  return.   Functions  which return no
X                           value    (void)    should    use     the
X                           DBUG_VOID_RETURN  macro.  It is an error
X                           to     have     a     DBUG_RETURN     or
X                           DBUG_VOID_RETURN  macro  in  a  function
X                           which has no matching DBUG_ENTER  macro,
X                           and  the  compiler  will complain if the
X                           macros are actually used (expanded).
X
X                           EX: DBUG_RETURN (value);
X                           EX: DBUG_VOID_RETURN;
X
X             DBUG_PROCESS  Used to name the current  process  being
X                           executed.   A  typical argument for this
X                           macro is "argv[0]", though  it  will  be
X                           perfectly happy with any other string.
X
X                           EX: DBUG_PROCESS (argv[0]);
X
X                DBUG_PUSH  Sets a new debugger state by pushing the
X                           current  ddddbbbbuuuugggg  state  onto  an  internal
X
X
X
X                                  - 15 -
X
X
X
X
X
X
X
X       DBUG User Manual                            October 29, 1986
X
X
X
X                           stack and setting up the new state using
X                           the  debug  control string passed as the
X                           macro argument.  The most  common  usage
X                           is to set the state specified by a debug
X                           control  string   retrieved   from   the
X                           argument  list.   Note  that the leading
X                           "-#" in a debug control string specified
X                           as  a  command line argument must nnnnooootttt be
X                           passed as part of  the  macro  argument.
X                           The proper usage is to pass a pointer to
X                           the  first  character  aaaafffftttteeeerrrr  the   "-#"
X                           string.
X
X                           EX: DBUG_PUSH ((argv[i][2]));
X                           EX: DBUG_PUSH ("d:t");
X                           EX: DBUG_PUSH ("");
X
X                 DBUG_POP  Restores the previous debugger state  by
X                           popping  the state stack.  Attempting to
X                           pop more  states  than  pushed  will  be
X                           ignored  and  no  warning will be given.
X                           The DBUG_POP macro has no arguments.
X
X                           EX: DBUG_POP ();
X
X                DBUG_FILE  The  DBUG_FILE  macro  is  used  to   do
X                           explicit I/O on the debug output stream.
X                           It is used in the  same  manner  as  the
X                           symbols  "stdout"  and  "stderr"  in the
X                           standard I/O package.
X
X                           EX: fprintf (DBUG_FILE, "Doing  my   own
X                           I/O!0);
X
X             DBUG_EXECUTE  The  DBUG_EXECUTE  macro  is   used   to
X                           execute any arbitrary C code.  The first
X                           argument is the debug keyword,  used  to
X                           trigger  execution of the code specified
X                           as the second argument.  This macro must
X                           be  used  cautiously  because,  like the
X                           DBUG_PRINT macro,  it  is  automatically
X                           selected  by  default  whenever  the 'd'
X                           flag has no argument list  (I.E.,  a  "-
X                           #d:t" control string).
X
X                           EX: DBUG_EXECUTE ("abort", abort ());
X
X                   DBUG_N  These macros, where N is  in  the  range
X                           2-5,  are currently obsolete and will be
X                           removed in a future  release.   Use  the
X                           new DBUG_PRINT macro.
X
X
X
X                                  - 16 -
X
X
X
X
X
X
X
X       DBUG User Manual                            October 29, 1986
X
X
X
X               DBUG_PRINT  Used to do printing  via  the  "fprintf"
X                           library  function  on  the current debug
X                           stream, DBUG_FILE.  The  first  argument
X                           is  a  debug  keyword,  the  second is a
X                           format  string  and  the   corresponding
X                           argument  list.   Note  that  the format
X                           string and argument  list  are  all  one
X                           macro  argument  and mmmmuuuusssstttt be enclosed in
X                           parenthesis.
X
X                           EX: DBUG_PRINT ("eof", ("end of file found"));
X                           EX: DBUG_PRINT ("type", ("type is %x",
X                           type));
X                           EX: DBUG_PRINT ("stp", ("%x -> %s", stp,
X                           stp -> name));
X
X              DBUG_SETJMP  Used in place of the  setjmp()  function
X                           to first save the current debugger state
X                           and then  execute  the  standard  setjmp
X                           call.   This  allows  to the debugger to
X                           restore it's state when the DBUG_LONGJMP
X                           macro  is  used  to  invoke the standard
X                           longjmp() call.  Currently all instances
X                           of  DBUG_SETJMP  must  occur  within the
X                           same function and at the  same  function
X                           nesting level.
X
X                           EX: DBUG_SETJMP (env);
X
X             DBUG_LONGJMP  Used in place of the longjmp()  function
X                           to  first  restore the previous debugger
X                           state  at   the   time   of   the   last
X                           DBUG_SETJMP   and   then   execute   the
X                           standard  longjmp()  call.   Note   that
X                           currently    all   DBUG_LONGJMP   macros
X                           restore the state at  the  time  of  the
X                           last  DBUG_SETJMP.  It would be possible
X                           to  maintain  separate  DBUG_SETJMP  and
X                           DBUG_LONGJMP   pairs   by   having   the
X                           debugger runtime support module use  the
X                           first   argument  to  differentiate  the
X                           pairs.
X
X                           EX: DBUG_LONGJMP (env,val);
X
X
X
X
X
X
X
X
X
X
X                                  - 17 -
X
X
X
X
X
X
X
X       DBUG User Manual                            October 29, 1986
X
X
X
X       DDDDEEEEBBBBUUUUGGGG CCCCOOOONNNNTTTTRRRROOOOLLLL SSSSTTTTRRRRIIIINNNNGGGG
X
X
X            The debug control string is used to set  the  state  of
X       the   debugger   via  the  DDDDBBBBUUUUGGGG____PPPPUUUUSSSSHHHH  macro.   This  section
X       summarizes the currently available debugger options and  the
X       flag  characters  which  enable  or  disable them.  Argument
X       lists enclosed in '[' and ']' are optional.
X
X
X                d[,keywords] Enable   output   from   macros   with
X                             specified  keywords.   A  null list of
X                             keywords implies that all keywords are
X                             selected.
X
X                    D[,time] Delay for specified  time  after  each
X                             output  line,  to  let  output  drain.
X                             Time is given in tenths  of  a  second
X                             (value  of 10 is one second).  Default
X                             is zero.
X
X               f[,functions] Limit   debugger   actions   to    the
X                             specified  list  of functions.  A null
X                             list of  functions  implies  that  all
X                             functions are selected.
X
X                           F Mark each debugger  output  line  with
X                             the name of the source file containing
X                             the macro causing the output.
X
X                           L Mark each debugger  output  line  with
X                             the  source  file  line  number of the
X                             macro causing the output.
X
X                           n Mark each debugger  output  line  with
X                             the current function nesting depth.
X
X                           N Sequentially  number   each   debugger
X                             output  line  starting  at 1.  This is
X                             useful  for  reference  purposes  when
X                             debugger  output  is interspersed with
X                             program output.
X
X                    o[,file] Redirect the debugger output stream to
X                             the   specified   file.   The  default
X                             output  stream  is  stderr.   A   null
X                             argument  list  causes  output  to  be
X                             redirected to stdout.
X
X               p[,processes] Limit   debugger   actions   to    the
X                             specified   processes.   A  null  list
X
X
X
X                                  - 18 -
X
X
X
X
X
X
X
X       DBUG User Manual                            October 29, 1986
X
X
X
X                             implies all processes.  This is useful
X                             for    processes   which   run   child
X                             processes.  Note  that  each  debugger
X                             output  line  can  be  marked with the
X                             name of the current  process  via  the
X                             'P' flag.  The process name must match
X                             the    argument    passed    to    the
X                             DDDDBBBBUUUUGGGG____PPPPRRRROOOOCCCCEEEESSSSSSSS macro.
X
X                           P Mark each debugger  output  line  with
X                             the name of the current process.  Most
X                             useful when used with a process  which
X                             runs  child  processes  that  are also
X                             being debugged.  Note that the  parent
X                             process  must arrange for the debugger
X                             control string to  be  passed  to  the
X                             child processes.
X
X                           r Used in conjunction with the DDDDBBBBUUUUGGGG____PPPPUUUUSSSSHHHH
X                             macro to reset the current indentation
X                             level back to zero.  Most useful  with
X                             DDDDBBBBUUUUGGGG____PPPPUUUUSSSSHHHH  macros  used to temporarily
X                             alter the debugger state.
X
X                       t[,N] Enable function control flow  tracing.
X                             The maximum nesting depth is specified
X                             by N, and defaults to 200.
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X                                  - 19 -
X
X
X
X
X
X
X
X       DBUG User Manual                            October 29, 1986
X
X
X
X       HHHHIIIINNNNTTTTSSSS AAAANNNNDDDD MMMMIIIISSSSCCCCEEEELLLLLLLLAAAANNNNEEEEOOOOUUUUSSSS
X
X
X            One of the most useful capabilities of the _d_b_u_g package
X       is  to  compare  the  executions  of  a given program in two
X       different environments.  This is typically done by executing
X       the program in the environment where it behaves properly and
X       saving the debugger output in a reference file.  The program
X       is  then  run with identical inputs in the environment where
X       it  misbehaves  and  the  output  is  again  captured  in  a
X       reference  file.   The  two  reference  files  can  then  be
X       differentially compared to determine exactly where execution
X       of the two processes diverges.
X
X
X            A  related  usage  is  regression  testing  where   the
X       execution   of   a   current  version  is  compared  against
X       executions of previous versions.  This is most  useful  when
X       there are only minor changes.
X
X
X            It is not difficult to modify an existing  compiler  to
X       implement  some  of  the  functionality  of the _d_b_u_g package
X       automatically, without source code changes  to  the  program
X       being debugged.  In fact, such changes were implemented in a
X       version of the Portable C Compiler by  the  author  in  less
X       than  a  day.   However,  it is strongly encouraged that all
X       newly developed code continue to use the debugger macros for
X       the   portability   reasons  noted  earlier.   The  modified
X       compiler should be used only for testing existing programs.
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X                                  - 20 -
X
X
X
X
X
X
X
X       DBUG User Manual                            October 29, 1986
X
X
X
X       CCCCAAAAVVVVEEEEAAAATTTTSSSS
X
X
X            The _d_b_u_g package works best with  programs  which  have
X       "line oriented"  output,  such  as  text processors, general
X       purpose utilities, etc.  It can be  interfaced  with  screen
X       oriented  programs  such as visual editors by redefining the
X       appropriate macros to call special functions for  displaying
X       the  debugger  results.   Of  course,  this  caveat  is  not
X       applicable if the debugger output is simply  dumped  into  a
X       file for post-execution examination.
X
X
X            Programs which use memory  allocation  functions  other
X       than  mmmmaaaalllllllloooocccc  will  usually have problems using the standard
X       _d_b_u_g package.  The most common problem is multiply allocated
X       memory.
X
X
SHAR_EOF
chmod 0650 dmake/dbug/dbug/dbug.p ||
echo 'restore of dmake/dbug/dbug/dbug.p failed'
Wc_c="`wc -c < 'dmake/dbug/dbug/dbug.p'`"
test 42891 -eq "$Wc_c" ||
	echo 'dmake/dbug/dbug/dbug.p: original size 42891, current size' "$Wc_c"
rm -f _shar_wnt_.tmp
fi
# ============= dmake/dbug/getwd.c ==============
if test -f 'dmake/dbug/getwd.c' -a X"$1" != X"-c"; then
	echo 'x - skipping dmake/dbug/getwd.c (File already exists)'
	rm -f _shar_wnt_.tmp
else
> _shar_wnt_.tmp
sed 's/^X//' << 'SHAR_EOF' > 'dmake/dbug/getwd.c' &&
char *
getwd(pathname)
char *pathname;
{
X   return("delete this code if your getwd.c works correctly");
}
SHAR_EOF
chmod 0640 dmake/dbug/getwd.c ||
echo 'restore of dmake/dbug/getwd.c failed'
Wc_c="`wc -c < 'dmake/dbug/getwd.c'`"
test 106 -eq "$Wc_c" ||
	echo 'dmake/dbug/getwd.c: original size 106, current size' "$Wc_c"
rm -f _shar_wnt_.tmp
fi
# ============= dmake/dbug/malloc/Makefile ==============
if test ! -d 'dmake/dbug/malloc'; then
    mkdir 'dmake/dbug/malloc'
fi
if test -f 'dmake/dbug/malloc/Makefile' -a X"$1" != X"-c"; then
	echo 'x - skipping dmake/dbug/malloc/Makefile (File already exists)'
	rm -f _shar_wnt_.tmp
else
> _shar_wnt_.tmp
sed 's/^X//' << 'SHAR_EOF' > 'dmake/dbug/malloc/Makefile' &&
#
# (c) Copyright 1990 Conor P. Cahill (uunet!virtech!cpcahil).  
# You may copy, distribute, and use this software as long as this
# copyright statement is not removed.
#
#
# This is the Makefile for the malloc debugging library
#
# $Id: Makefile,v 1.5 90/08/29 22:34:27 cpcahil Exp $
#
CC=cc
# for System V systems use this CFLAGS
#CFLAGS=-g -DSYS5
# else for BSD use:
#CFLAGS=-g
LINT=lint
SHARCMD=shar -o mallocshar -l50 -x -a -n Malloclib
SHELL=/bin/sh
X
LIB=libmalloc.a
X
SRCS=	malloc.c	\
X	free.c		\
X	realloc.c	\
X	calloc.c	\
X	string.c	\
X	mlc_chk.c	\
X	mlc_chn.c	\
X	memory.c	\
X	tostring.c	\
X	m_perror.c	\
X	m_init.c	\
X	mallopt.c	\
X	dump.c
X
OBJS=	malloc.o	\
X	free.o		\
X	realloc.o	\
X	calloc.o	\
X	string.o	\
X	mlc_chk.o	\
X	mlc_chn.o	\
X	memory.o	\
X	tostring.o	\
X	m_perror.o	\
X	m_init.o	\
X	mallopt.o	\
X	dump.o
X
TESTS=testmlc testmem
X
all:	$(LIB) $(TESTS)
X
clean:  
X	rm -f $(TESTS) pgm $(LIB) *.o *.ln
X
sharfile:
X	$(SHARCMD) Makefile README patchlevel *.[ch3] 
X	
$(LIB): $(OBJS)
X	ar ru $(LIB) $(OBJS)
X	-if test -s /bin/ranlib; then /bin/ranlib $(LIB); else exit 0; fi
X	-if test -s /usr/bin/ranlib; then /usr/bin/ranlib $(LIB); else exit 0; fi
X
testmlc:	$(LIB) testmlc.o
X	$(CC) -o $@ testmlc.o $(LIB)
X
testmem:	$(LIB) testmem.o
X	$(CC) -o $@ testmem.o $(LIB)
X
lint:	
X	$(LINT) $(CFLAGS) $(SRCS) testmlc.c testmem.c
X
X
$(OBJS):	malloc.h
X
tostring.o malloc.o dump.o:	tostring.h
SHAR_EOF
chmod 0640 dmake/dbug/malloc/Makefile ||
echo 'restore of dmake/dbug/malloc/Makefile failed'
Wc_c="`wc -c < 'dmake/dbug/malloc/Makefile'`"
test 1365 -eq "$Wc_c" ||
	echo 'dmake/dbug/malloc/Makefile: original size 1365, current size' "$Wc_c"
rm -f _shar_wnt_.tmp
fi
# ============= dmake/dbug/malloc/_changes ==============
if test -f 'dmake/dbug/malloc/_changes' -a X"$1" != X"-c"; then
	echo 'x - skipping dmake/dbug/malloc/_changes (File already exists)'
	rm -f _shar_wnt_.tmp
else
> _shar_wnt_.tmp
sed 's/^X//' << 'SHAR_EOF' > 'dmake/dbug/malloc/_changes' &&
I made the following changes to the malloc package as found in
comp.sources.unix:
X
X	1. created this file _changes.
X	2. moved README to _readme (facilitates transfer to DOS and back to
X	   unix)
X	3. renamed testmalloc.c, malloc_chk.c, and malloc_chn.c to testmlc.c,
X	   mlc_chk.c, and mlc_chn.c respectively.  Again DOS has trouble with
X	   long basenames in filenames.
SHAR_EOF
chmod 0640 dmake/dbug/malloc/_changes ||
echo 'restore of dmake/dbug/malloc/_changes failed'
Wc_c="`wc -c < 'dmake/dbug/malloc/_changes'`"
test 369 -eq "$Wc_c" ||
	echo 'dmake/dbug/malloc/_changes: original size 369, current size' "$Wc_c"
rm -f _shar_wnt_.tmp
fi
# ============= dmake/dbug/malloc/_readme ==============
if test -f 'dmake/dbug/malloc/_readme' -a X"$1" != X"-c"; then
	echo 'x - skipping dmake/dbug/malloc/_readme (File already exists)'
	rm -f _shar_wnt_.tmp
else
> _shar_wnt_.tmp
sed 's/^X//' << 'SHAR_EOF' > 'dmake/dbug/malloc/_readme' &&
# (c) Copyright 1990 Conor P. Cahill. (uunet!virtech!cpcahil) 
# You may copy, distribute, and use this software as long as this
# copyright statement is not removed.
X
This package is a collection of routines which are a drop-in replacement
for the malloc(3), memory(3), string(3), and bstring(3) library functions.
X
The purpose of these programs is to aid the development and/or debugging
of programs using these functions by providing a high level of consistancy
checking whenever a malloc pointer is used.  Due to this increased 
level of consistancy checking, these functions have a considerably larger
overhead than the standard functions, but the extra checking should be
well worth it in a development environment.
X
To use these functions all you need to do is compile the library and
include it on your loader command line.  You do not need to recompile
your code, only a relink is necessary.  
X
Features of this library:
X
X 1. The malloced area returned from each call to malloc is filled with
X    non-null bytes.  This should catch any use of uninitialized malloc
X    area.  The fill pattern for malloced area is 0x01.
X
X 2. When free is called numerous validity checks are made on the 
X    pointer it is passed.  In addition, the data in the malloc block
X    beyound the size requested on the initial malloc is checked to 
X    verify that it is still filled with the original fill characters.
X
X	This is usefull for catching things like:
X
X		ptr = malloc(5);
X		ptr[5] = '\0';
X
X		/*
X		 * You should not that this will be caught when it is
X		 * freed not when it is done
X		 */
X
X    And finally, the freed block is filled with a different fill pattern
X    so that you can easily determine if you are still using free'd space.
X    The fill pattern for free'd areas is 0x02.
X
X	This is usefull for catching things like:
X
X		ptr = malloc(20);
X
X		bptr = ptr+10;
X
X		/* do something usefule with bptr */
X
X		free(ptr);
X
X		/* 
X		 * now try to do something useful with bptr, it should
X		 * be trashed enough that it would cause real problems
X		 * and when you went to debug the problem it would be
X		 * filled with 0x02's and you would then know to look 
X		 * for something free'ing what bptr points to.
X		 */
X		
X
X 3. Whenever a bstring(3)/string(3)/memory(3) function is called, it's 
X    parameters are checked as follows:
X
X	If they point somewhere in the malloc arena
X		If the operation goes beyond requested malloc space
X			call malloc_warning()
X
X	This is usefull for catching things like:
X
X		ptr = malloc(5);
X		strcpy(ptr,"abcde");
X			
X	
X 4. Malloc_warning() and malloc_fatal() are used when an error condition
X    is detected.  If the error is severe, malloc_fatal is called.  
X    Malloc_warning is used otherwise.  The decision about what is fatal
X    and what is a warning was made somewhat arbitrarily.
X
X    Warning messages include:
X
X	Calling free with a bad pointer
X        Calling a bstring/string/memory (3) function which will go beyond
X	    the end of a malloc block (Note that the library function is
X            not modified to refuse the operation.  If malloc warnings are
X	    in the default IGNORE case, the operation will continue and 
X	    at some point cause a real problem).
X
X    Fatal errors are:
X
X	Detectable corruption to the malloc chain.
X	
X
X 5. The operations to perform when an error is detected are specified at
X    run time by the use of environment variables.
X
X	MALLOC_WARN - specifies the warning error message handling
X	MALLOC_FATAL - specifies the fatal error handling
X
X
X	When one of these error conditions occur you will get an error
X	message and the handler will execute based upon what setting
X	is in the environment variables.  Currently understood settings
X	are as follows:
X
X		  0 - continue operations
X		  1 - drop core and exit
X		  2 - just exit
X		  3 - drop core, but continue executing.  Core files will
X	 		be placed into core.[PID].[counter] i.e: core.00123.001
X		128 - dump malloc chain and continue
X		129 - dump malloc chain, dump core, and exit
X		130 - dump malloc chain, exit
X		131 - dump malloc chain, dump core, continue processing
X		
X
X	There is an additional environment variable MALLOC_ERRFILE which
X	is used to indicate the name of the file for error message output.
X
X	For example, to set up the session to generate a core file for
X	every malloc warning, to drop core and exit on a malloc fatal, and 
X	to log all messages to the file "malloc_log" do the following:
X
X		MALLOC_WARN=131
X		MALLOC_FATAL=1
X		MALLOC_ERRFILE=malloc_log
X
X		export MALLOC_WARN MALLOC_FATAL MALLOC_ERRFILE
X
X 6. The function malloc_dump() is available to dump the malloc chain whenever
X    you might want.  It's only argument is a file descriptor to use to write
X    the data.  Review the code if you need to know what data is printed.
SHAR_EOF
chmod 0640 dmake/dbug/malloc/_readme ||
echo 'restore of dmake/dbug/malloc/_readme failed'
Wc_c="`wc -c < 'dmake/dbug/malloc/_readme'`"
test 4758 -eq "$Wc_c" ||
	echo 'dmake/dbug/malloc/_readme: original size 4758, current size' "$Wc_c"
rm -f _shar_wnt_.tmp
fi
# ============= dmake/dbug/malloc/calloc.c ==============
if test -f 'dmake/dbug/malloc/calloc.c' -a X"$1" != X"-c"; then
	echo 'x - skipping dmake/dbug/malloc/calloc.c (File already exists)'
	rm -f _shar_wnt_.tmp
else
> _shar_wnt_.tmp
sed 's/^X//' << 'SHAR_EOF' > 'dmake/dbug/malloc/calloc.c' &&
/*
X * (c) Copyright 1990 Conor P. Cahill (uunet!virtech!cpcahil).  
X * You may copy, distribute, and use this software as long as this
X * copyright statement is not removed.
X */
#include <stdio.h>
X
/*
X * Function:	calloc()
X *
X * Purpose:	to allocate and nullify a data area
X *
X * Arguments:	nelem	- number of elements
X *		elsize	- size of each element
X *
X * Returns:	NULL	- if malloc fails
X *		or pointer to allocated space
X *
X * Narrative:	determine size of area to malloc
X *		malloc area.
X *		if malloc succeeds
X *		    fill area with nulls
X *		return ptr to malloc'd region
X */
#ifndef lint
static char rcs_header[] = "$Id: calloc.c,v 1.6 90/05/11 00:13:07 cpcahil Exp $";
#endif
X
char *
calloc(nelem,elsize)
X	unsigned int 	  nelem;
X	unsigned int 	  elsize;
{
X	char		* malloc();
X	char		* memset();
X	char		* ptr;
X	unsigned int	  size;
X
X	size = elsize * nelem;
X
X	if( (ptr = malloc(size)) != NULL)
X	{
X		(void) memset(ptr,'\0',(int)size);
X	}
X
X	return(ptr);
}
X
X
/*
X * $Log:	calloc.c,v $
X * Revision 1.6  90/05/11  00:13:07  cpcahil
X * added copyright statment
X * 
X * Revision 1.5  90/02/24  20:41:57  cpcahil
X * lint changes.
X * 
X * Revision 1.4  90/02/24  17:25:47  cpcahil
X * changed $header to $id so full path isn't included.
X * 
X * Revision 1.3  90/02/24  13:32:24  cpcahil
X * added function header.  moved log to end of file.
X * 
X * Revision 1.2  90/02/22  23:08:26  cpcahil
X * fixed rcs_header line
X * 
X * Revision 1.1  90/02/22  23:07:38  cpcahil
X * Initial revision
X * 
X */
SHAR_EOF
chmod 0640 dmake/dbug/malloc/calloc.c ||
echo 'restore of dmake/dbug/malloc/calloc.c failed'
Wc_c="`wc -c < 'dmake/dbug/malloc/calloc.c'`"
test 1481 -eq "$Wc_c" ||
	echo 'dmake/dbug/malloc/calloc.c: original size 1481, current size' "$Wc_c"
rm -f _shar_wnt_.tmp
fi
# ============= dmake/dbug/malloc/debug.h ==============
if test -f 'dmake/dbug/malloc/debug.h' -a X"$1" != X"-c"; then
	echo 'x - skipping dmake/dbug/malloc/debug.h (File already exists)'
	rm -f _shar_wnt_.tmp
else
> _shar_wnt_.tmp
sed 's/^X//' << 'SHAR_EOF' > 'dmake/dbug/malloc/debug.h' &&
/*
X * (c) Copyright 1990 Conor P. Cahill (uunet!virtech!cpcahil).  
X * You may copy, distribute, and use this software as long as this
X * copyright statement is not removed.
X */
/************************************************************************/
/*									*/
/* this include sets up some macro functions which can be used while	*/
/* debugging the program, and then left in the code, but turned of by	*/
/* just not defining "DEBUG".  This way your production version of 	*/
/* the program will not be filled with bunches of debugging junk	*/
/*									*/
/************************************************************************/
/*
X * $Id: debug.h,v 1.2 90/05/11 00:13:08 cpcahil Exp $
X */
X
#ifdef DEBUG
X
#if DEBUG == 1			/* if default level			*/
#undef DEBUG
#define DEBUG	100		/*   use level 100			*/
#endif
X
#include <stdio.h>
X
#define DEBUG0(val,str)\
X				{\
X				  if( DEBUG > val ) \
X				    fprintf(stderr,"%s(%d): %s\n",\
X						__FILE__,__LINE__,str);\
X				}
#define DEBUG1(val,str,a1)\
X			        {\
X				  char _debugbuf[100];\
X				  if( DEBUG > val )\
X				   {\
X				    sprintf(_debugbuf,str,a1);\
X				    fprintf(stderr,"%s(%d): %s\n",\
X						__FILE__,__LINE__,_debugbuf);\
X				   }\
X		       		}
X
#define DEBUG2(val,str,a1,a2)\
X			        {\
X				 char _debugbuf[100];\
X				  if( DEBUG > val )\
X				   {\
X				    sprintf(_debugbuf,str,a1,a2);\
X				    fprintf(stderr,"%s(%d): %s\n",\
X						__FILE__,__LINE__,_debugbuf);\
X				   }\
X		       		}
X
#define DEBUG3(val,str,a1,a2,a3)\
X			        {\
X				  char _debugbuf[100];\
X				  if( DEBUG > val )\
X				   {\
X				    sprintf(_debugbuf,str,a1,a2,a3);\
X				    fprintf(stderr,"%s(%d): %s\n",\
X						__FILE__,__LINE__,_debugbuf);\
X				   }\
X		       		}
X
#define DEBUG4(val,str,a1,a2,a3,a4)\
X			         {\
X				  char _debugbuf[100];\
X				  if( DEBUG > val )\
X				   {\
X				    sprintf(_debugbuf,str,a1,a2,a3,a4);\
X				    fprintf(stderr,"%s(%d): %s\n",\
X						__FILE__,__LINE__,_debugbuf);\
X				   }\
X		       		}
X
#define DEBUG5(val,str,a1,a2,a3,a4,a5)\
X			         {\
X				  char _debugbuf[100];\
X				  if( DEBUG > val )\
X				   {\
X				    sprintf(_debugbuf,str,a1,a2,a3,a4,a5);\
X				    fprintf(stderr,"%s(%d): %s\n",\
X						__FILE__,__LINE__,_debugbuf);\
X				   }\
X		       		}
X
#else
SHAR_EOF
true || echo 'restore of dmake/dbug/malloc/debug.h failed'
fi
echo 'End of part 4, continue with part 5'
echo 5 > _shar_seq_.tmp
exit 0

exit 0 # Just in case...
-- 
Kent Landfield                   INTERNET: kent at sparky.IMD.Sterling.COM
Sterling Software, IMD           UUCP:     uunet!sparky!kent
Phone:    (402) 291-8300         FAX:      (402) 291-4362
Please send comp.sources.misc-related mail to kent at uunet.uu.net.



More information about the Comp.sources.misc mailing list