OBM <--> Telebit incompatibility: SUMMARY

[Tom Tkacik]

In article <1479 at das13.snide.com>, dave at das13.snide.com (Dave Snyder) writes:
> Sounds good... could you please post or mail the "S" register settings for this
> configuration.  Come to think of it, after all the talk of getting an OBM to
> talk to a Telebit, NO ONE has post his/her "S" register settings for their
> working configuration.  Could some of you others that have a Telebit
> successfully interacting with an OBM post your settings.  Thanks!!!
> 

For your amusement and edification.

# This is the current configuration for the Telebit T1000 on kyzyl
# It is set up to talk at 19200 baud, for outgoing calls.
# On receiving a call, the interface speed will change to match the connection
#	speed.   (S66=0)
# /etc/inittab has getty answer at 1200 baud, but will cycle up 2400, 19200.
#
# S111=255,  talk whatever protocol the other modem knows.
#	When dialing out the other modem will probably also have S111=255,
#	and no UUCP spoofing will be done.  This is for manual dial out.
#	When UUCP dials out, it will first set S111=30.
#	 (See /usr/lib/uucp/modemcap entry for telebit.)

E1 F1 M1 Q0 P V1 W0 X1 Y0 &P0 &T4     Version FA2.01
S00=001 S01=000 S02=043 S03=013 S04=010 S05=008 S06=002 S07:060 S08=002 S09=006
S10=007 S11=070 S12=050 S18=000 S25=005 S38=000
S41:002 S45=000 S47=004 S48=000 S49=000
S50=000 S51:254 S52:002         S54:002 S55=000 S56=017 S57=019 S58:002 S59=000
S60=000 S61=150 S62=003 S63=001 S64:001 S65=000 S66=000 S67=000 S68=255 S69=000
S90=000 S91=000 S92=000 S94=001 S95=000 S96=001 
S100=000 S101=000 S104=000 
S111=255 S112=001 
S121=000 S130=002 S131:001 S255=001 

-- 
Tom Tkacik                |
tkacik at kyzyl.mi.org       |     To rent this space, call 1-800-555-QUIP.
...!rphroy!kyzyl!tkacik   |