vt100 emulator ?

[Bernard J. Duffy]

In article <223000004 at uxe.cso.uiuc.edu> sam at uxe.cso.uiuc.edu writes:
>
>RE: xterm under irix 3.2
>
>In the meantime, let me ask if anyone can tell me
>where one finds the key mapping for the VT100 "do"
>key (so important to the eve editor, etc.) when
>using "xterm" under Irix 3.2 on the SGI?

Coming from a VAX/VMS environment with may faculty users in the same boat,
I had a need to find the EDT keypad.  If you send the terminal an <esc>=
(I believe since I can't tested in with the hp workstation I'm using now),
the keypad should be enable to be the DEC VT100 type.  The numbered buttons
as well as the . (period) and enter  are direct maps.  The PF buttons are
the 4 function buttons labeled F9-F12 (the set of 4 right above the del-back
space button of the main keyboard).  This is documented, but I can't remember
where (probably the Owner's Guide or the man page for wsh).  I'd normally 
spend more time of making this message more correct, but can't right now 
and I thought the info/hint was more important.

for your enjoyment,  Bernie

Bernie Duffy   Systems Programmer II | Bitnet    :  BERNIE at UMBC2
Academic Computing - L005e           | Internet  :  BERNIE at UMBC2.UMBC.EDU
Univ. of Maryland, Baltimore County  | UUCP      :  ...!uunet!umbc3!bernie
Baltimore, MD  21228   (U.S.A.)      | W: (301) 455-3231  H: (301) 744-2954