Problem: Slow UUCP using Trailblazer+
Operator
moldev!rootksh at uunet.uu.net
Wed Apr 5 14:50:28 AEST 1989
Hi folks -
I'm trying to find out why my modem connects to uunet in high speed mode,
but the transmission speed is only about 1200 baud. I know that the two
modems are happy and that the phone lines are of good quality because if I
interrupt a call ( using +++ ) to examine the registers S70 and S72, they
show rates of 16000-17000 bps. I do the setup and dialing for the modem in
the chat script like this :
uunet Any cua0 19200 cua0 "" ATZ\r OK atx3v1e0q0s7=60s50=255dtXXXXXXXXXXX\r FAST
"" ogin: XXXXX assword: XXXXX
When uucp is receiving a file, The RCV light on the front panel of the
modem shows only brief pulses - I'd guess no more than 20% of the time on,
80% off.
Also ... Can you tell me if it is possible or desireable to enable "g"
protocol in the Trailblazer with the uucp in SunOS4.0 ? UUCP appears to
hang when it's enabled. If not, then will it be possible under 4.1 (
Honey DanBer uucp ?? ).
More information about the Comp.sys.sun
mailing list