3/80 binaries

[Russ Poffenberger]

In article <331 at brazos.Rice.edu> tardis!jms at tymix.tymnet.com (Joe Smith) writes:
|X-Sun-Spots-Digest: Volume 8, Issue 81, message 1 of 15
|
|In article <138 at brazos.Rice.edu> convex!datri at uxc.cso.uiuc.edu (Anthony A. Datri) writes:
|>X-Sun-Spots-Digest: Volume 8, Issue 71, message 10 of 18
|>Will the 3/80 run pre-4.0.3 binaries?  Is the 4.0.3 distribution the same
|>for the 030 and 020 machines?
|>We've got servers with 4.0 binaries on them, and I've been told that we
|>need 4.0.3 to run the 3/80's.  What I want to know is if we put 4.0.3
|>binaries on the server, will they be the same for the 3/(50,60..) and 3/80's?
|
|The 4.0.3 upgrade tapes include /export/exec/sun3 and
|/export/exec/kvm/sun3 but do not include /export/exec/kvm/sun3x.  You have
|to get a "4.0.3 Install" tape to get the files that reside in /usr/kvm on
|the 3/80 - programs that understand the 68030's MMU is different than
|Sun's MMU for the 68020.
|
|The files that are missing are:
|	/usr/kvm:
|eeprom	ld.so	ldconfig   libkvm.a	libkvm.so.0.2	libkvm.so.0.3
|ps	pstat	sun3x	   vmstat
|	/usr/kvm/boot:
|hostname  ifconfig  init  kadb  mount  sh  vmunix  vmunix_small
|	/usr/kvm/mdec:
|bootsd	bootxd	bootxy	installboot	rawboot
|	/usr/kvm/stand:
|boot.sun3	copy	tpboot.sun3
|
|Joe Smith (408)922-6220 | SMTP: JMS at F74.TYMNET.COM or jms at tymix.tymnet.com
|McDonnell Douglas FSCO  | UUCP: ...!{ames,pyramid}!oliveb!tymix!tardis!jms
|PO Box 49019, MS-D21    | PDP-10 support: My car's license plate is "POPJ P,"
|San Jose, CA 95161-9019 | narrator.device: "I didn't say that, my Amiga did!"


>From what I understand, its not a special tape you need, just the standard
4.0.3 release tape for a sun-3x. Then on your server you install it using
'setup_exec'.  (there is a man page on it.) and it knows what to do. This
is how you set up a server for any foriegn architecture (heterogenous
server).

Russ Poffenberger
Schlumberger Technologies
(poffen at sj.ate.slb.com)