NewGen TurboPS/360 printcap entry request

[amir at taux01.nsc.com]

[I'm pretty sure I have not posted this before, but if I did, I apologize
- I have not seen it in the sun-spots -- AJK].

Subject: Need a printcap entry for NewGen TurboPS/360 Postscript printer

- I have a NewGen TurboPS/360 Postscript printer connected to a Sun IPC running
  SunOS 4.1 via serial port A, 19200 bps.
- Printer works OK in PostScript mode.
- It can do LaserJet II emulation but I can't get it to work. Sending an LJ job to it
  results in constant stream of data sent from the spooling machine to the printer,
  the BUSY light on the printer is constantly on, but nothing comes out. A long sequence
  of lpc commands is required to kill this mess.
- Any hints?

   Amir J. Katz, System Manager

Internet:	amir%pilat.UUCP at taux01.nsc.com OR amir at taux01.nsc.com
UUCP:		{decwrl,uunet,...}!nsc!taux01!amir
Phone:		+972 52-570713
Fax:		+972 52-570719
Snail-mail:	Amir J. Katz, Silvaco Israel Ltd.
		19 Maskit St., Herzelia, Israel 46733