problems with AIX (and are they fixed in new loads)

[Robin D. Wilson/1000000]

In article <071290.095832.heise1 at ibm.com> RAH at IBM.COM ("Russell A. Heise") writes:
<
< geoff at edm.uucp (Geoff Coleman) writes:
< > 1) bi-directional line support
< >        I have tried a number of times to set a getty as being bi-directional
< > but have had no luck in being able to call out on this line. It would appear
< > that getty locks the line as soon as init fires and that cu (or uucico) can
< > then not gain access to the line.
< > ...
< No, this does not appear to be fixed in later releases.  If you enable the
< line with pdelay or pshare, you can use cu or uucico to dial out.  However, if
< the line is not active and getty sees a call-in, getty locks the line and
< then leaves the lock file after the call-in user has logged out.  You may
< want to contact your local IBM representative and have him/her report the
< problem as a Software Defect.


I missed the first post (with the original question), but under AIX v.2.2.1 for
the RT/PC this problem is fixed.  It requires OPSYS update level 1764 (or 2706)
and VRM level 1710.  I personnaly have my machine setup with a Telebit 
trailblazer that I use for test just such problems, nd I do not have a problem
with being locked out of the port.  (There was a relaese for the RT that had
"cu" setting the tty permissions to 644 which made the port unwriteable by the
next user -- this has also been fixed, but I am not sure if the update is
currently avaiable with this fix.)

If this is a RS/6000 or PS/2 AIX problem ignore what I said....


+-----------------------------------------------------------------------------+
|The views expressed herein, are the sole responsibility of the typist at hand|
+-----------------------------------------------------------------------------+
|UUCP:     cs.utexas.edu!ibmchs!auschs!sabre.austin.ibm.com!robin             |
|USNail:   701 Canyon Bend Dr.                                                |
|          Pflugerville, TX  78660                                            |
|          Home: (512)251-6889      Work: (512)823-4526                       |
+-----------------------------------------------------------------------------+