uucico problem with flow control

[Steve Dyer]

You can't use ^S/^Q flow control with uucico, since the 'g' protocol
expects a transparent 8-bit channel.  This isn't a problem with the
TB+ in PEP mode since ^S/^Q won't be sent, but it will be a problem
at slower speeds.  I assume you have the TB+ fixed at 9600 or 19.2k baud.
Some people (not me) have reported success with a fixed baud rate and
^S/^Q turned off on the modem.  Alternately, you can reconfigure the
Telebit to use the speed of the incoming modem.


-- 
Steve Dyer
dyer at ursa-major.spdcc.com aka {ima,harvard,rayssd,linus,m2c}!spdcc!dyer
dyer at arktouros.mit.edu