Xsight and EtherCard Plus - problems

[Keith Ericson]

In article <29 at maxx.UUCP> tyager at maxx.UUCP (Tom Yager) writes:

	[speaking of the Western Digital EtherCard Plus]

>Make sure your system's bus doesn't run higher than 8MHz, and that the WD8003E
>wait-state jumper isn't on the 6MHz setting.

We regularly run these little hummers in Everex Step/25's with the bus set
to operate at SysClk/2 (i.e., 12.5 MHz) with no ill effects.

kEITHe