getty problems with x5 update and telebit trailblazer

[Max Heffler @ Landmark Graphics]

I have successfully used the acu1 port for outbound traffic from my Telebit
on a Compaq 386/25 running 386/ix 2.0.2 with the x5 update.  I have not
been successful with the getty on ttyd1.  When I set it up per the
documentation, the modem will answer, but ps -ef shows getty still running
but no login prompt is offered, and the caller appears hung.

My /etc/conf/init.d/asy is:
# Telebit Trailblazer on ttyd1
01:2345:respawn:/etc/getty -t 60 ttyd1 TB8-19200

I performed idmkinit and tested it successfully using telinit q

My Dialers has:
tbfast  =W-,    "" A\pA\pA\pA\pA\pT OK ATx3s0=0s64=1s50=255DT\T FAST-\c-FAST
tbinit  =W-,    "" A\pA\pA\pA\pA\pT OK ATs51=254 OK

My Devices has:
ACU acu1 - 9600 tbfast \T
ACU acu1 - 19200 tbfast \T
ACU tbinit - 19200 tbinit \T

and I successfully dial on on acu1, including cu and uucp.

My gettydefs has:
TB8-19200# B19200 HUPCL OPOST ONLCR TAB3 BRKINT IGNPAR IXON IXANY ISTRIP ECHO EC
HOE ECHOK ICANON ISIG CS8 CREAD # B19200 HUPCL OPOST ONLCR TAB3 BRKINT IGNPAR IX
ON IXANY ISTRIP ECHO ECHOE ECHOK ICANON ISIG CS8 CREAD #login: #TB8-2400

TB8-2400# B2400 HUPCL OPOST ONLCR TAB3 BRKINT IGNPAR IXON IXANY ISTRIP ECHO ECHO
E ECHOK ICANON ISIG CS8 CREAD # B2400 HUPCL OPOST ONLCR TAB3 BRKINT IGNPAR IXON
IXANY ISTRIP ECHO ECHOE ECHOK ICANON ISIG CS8 CREAD #login: #TB8-1200

TB8-1200# B1200 HUPCL OPOST ONLCR TAB3 BRKINT IGNPAR IXON IXANY ISTRIP ECHO ECHO
E ECHOK ICANON ISIG CS8 CREAD # B1200 HUPCL OPOST ONLCR TAB3 BRKINT IGNPAR IXON
IXANY ISTRIP ECHO ECHOE ECHOK ICANON ISIG CS8 CREAD #login: #TB8-19200

Does anybody have any clues as to why the getty does not give a login prompt
and or what methods are there for testing further the operation on the Compaq
when the login prompt is not produced?  Help...

Thanx in advance
--
Max Heffler			internet: max at lgc.com
Landmark Graphics Corp.		uucp: ..!uunet!lgc!max
333 Cypress Run, Suite 100      phone: (713) 579-4751
Houston, Texas  77094