HP Laserjet not working under SCO Unix

[John R. Levine]

In article <14574 at hydra.gatech.EDU> gt0178a at prism.gatech.EDU (Jim Burns) writes:
>The limiting factor for graphics should be the processing and printing
>time, NOT the xfer rate.

A 6x10" image at 300dpi is over 600K bytes.  Even assuming some reasonable
zero compression, it's often 400K.  If you assume a rather optimistic 10K
bytes/sec for your parallel port, that's still 40 seconds per page, which
is much slower than the printer prints.

-- 
John R. Levine, IECC, POB 349, Cambridge MA 02238, +1 617 864 9650
johnl at esegue.segue.boston.ma.us, {ima|spdcc|world}!esegue!johnl
Atlantic City gamblers lose $8200 per minute. -NY Times