V/286==merge problem

rohan kelley rk at bigbroth.UUCP
Wed Aug 17 11:19:34 AEST 1988


I have a PC Limited 286 -8, 1MB, ST251 disk with the latest d11 rom
bios installed.  It runs the SysV/286 ok
but I just installed locus merge.  It shifts to dos on command, but
on return to dos, the problems begin.  During some commands, the screen
freezes.  If I try to reboot from the $ or # prompt, it makes one quick
disk seek, then freezes.  No key will free it.  A contr-alt-del simply
prints on the screen "The system is coming down" and nothing else
happens.  Each type the c-a-d is pushed after that, the same message is
printed.  The only way to thaw it is to turn off the power and risk the
file system corruption. 

A c-a-d from dos produces the proper warm boot but the files suffer and
the fscheck does the usual repair.

A simple c-a-d from unix or a shutdown, so long as the dos side hasn't
been involked produces the expected results.  Only after having been in
dos do I get the problems.  

The boot indicates Clists=45 buffers=100k.  Is there some tunable
paramater, such as BUFFS that I could change to eliminate the problem?
Other than the obvious [stay out of dos] is there anything I can I can
do to make this thing run right?

Please email replies since this is not a normal newsgroup for me.
Thanks.

=======================================================================
Rohan Kelley -- UNIleX Systems, Inc. (Systems and software for lawyers)
UUCP:  ...{gatech!uflorida,ucf-cs}!novavax!bigbroth!rk
ATTmail:  attmail!bigbroth!rk
3365 Galt Ocean Drive, Ft. Lauderdale, FL 33308 Phone: (305) 563-1504

"Go first class or your heirs will" -somebodyelse
=======================================================================



More information about the Comp.unix.microport mailing list