UUCP setup problem using TCP

Tommy Hsieh yhsieh at cadence.cadence.com
Tue Jun 12 10:40:03 AEST 1990


Hi,

I have problems to setup UUCP on our Ethernet network.  I have two 
machines called "sys1" and "sys2" on the same network.

The following files are those UUCP related files I changed.

L-devices:
  sys1 :
       TCP - - 540 -
  sys2 :
       TCP - - 540 -

L.sys:
  sys1 :
       sys2 Any TCP 540 sys2
  sys2 :
       sys1 Any TCP 540 sys1

L.cmd:
  bothe have
       PATH=/bin:/usr/bin:/usr/ucb
       rmail X1
       rnews X1
       lpr X1
       uusend X9
       bnproc X1
       unbatchnews X1
       uux X9
       uuxp x9
       ls   x9

USERFILE:
  sys1 :
       Usys2,sys2 /usr
  sys2 : 
       Usys1,sys1 /usr

When I tested the system with the command "/usr/lib/uucp/uucico -r1 -ssys2 -x9"
on sys1.  In the LOGFILE it complains 
          "root sys2 (6/11-17:25-8367) FAILED (call to sys2,  NO DEVICE ) 

Could anybody what's wrong with my setup ?  Thanks in advance.

====================================================================
I    Tommy Hsieh              I    Cadence Design System, Inc.     I
I    (408) 987-5285           I    3393 Octavius Drive             I
I                             I    Santa Clara, CA 95054-3082      I
I    mail address :                                                I
I      yhsieh at cadence.com                                          I
I      ...!{versatc,apollo,ucbcad,uunet}!cadence!yhsieh            I
====================================================================



More information about the Comp.unix.questions mailing list