Please post

Wm E Davidsen Jr davidsen at crdos1.crd.ge.COM
Mon Dec 3 19:15:28 AEST 1990


SCO Support Level Supplements  - 11/30/90

These are updates and "fixit" distributions from the Santa Cruz Operation.

Many of these are available via anonymous uucp - see the section at the end
of this file.  These distributions are available to SCO customers who have
the corresponding products, and have registered the product serial numbers
with SCO.   You can call, register your product, and order an SLS at
the same time, or email to support at sco.com.   SCO USA,PAL Support can be
reached at 800-347-4381.  Support email address is support at sco.com.
Please do not call them to place orders, ask questions about
sales/business matters, etc.  Sales questions may
be directed to the general sales numbers:    

SCO (USA, Pacific, Asia, Latin America)       800-726-8649
SCO Canada  (Canadians, pls use this number)  800-461-6962
SCO Ltd. (Europe, Middle East, Africa)        +44 (0)923 816344
... or email to info at sco.com

Product        Version   Machine   Title                                 SLS #

SCO ODT-PS     3.2.1     386GT     WD7000 Support Level Supplement      unx208
SCO ODT-PS     1.0.0     386GT     ODT-DOS/Sio                          unx217
SCO ODT-PS     1.0.0     n386      X Select and Networking Library      unx221

SCO UNIX/ODT-PS3.2.0     KU386     SCO UNIX Irwin Driver                unx222

SCO UNIX       3.2.0 V2  386GT     SCO UNIX Maintenance Disk Release 1  unx251
SCO UNIX       3.2.0     386GT     Unix Utility Update                  unx162
SCO UNIX       3.2.0     386MC     Adaptec 1640 Supplement              unx186
SCO UNIX       3.2.0     KU386     SCO Security Supplement              unx223
SCO UNIX       3.2.0     U386      Usenet News                          unx194
SCO UNIX       3.2.0     U386      Custom Update                        unx235

UNIX/XENIX     2.3.2     n386      Logitech Busmouse Driver             unx204
UNIX/XENIX     2.3       n286      Hayes V-Series Modem Support Module  unx220
UNIX/XENIX     2.2.3     n386      SCO Xenix/Unix Crypt Support         lng190

SCO XENIX      2.3.2     386GT     Additional Hard Drive Supplement     xnx259
SCO XENIX      2.3.2     286PS     SCO ESDI Supplement for SCO XENIX 2  xnx231
SCO XENIX      2.3.2     386GT     Intel 303 Installation Supplement    xnx151
SCO XENIX      2.3.2     386MC     Support for 2 Adaptec 1640's         xnx170
SCO XENIX      2.3.2     386MC     16Mb Support for C & T Chip Set      xnx171
SCO XENIX      2.3.2     386MC     SCO ESDI Supplement for SCO XENIX 3  xnx232
SCO XENIX      2.3.2     386PS     Tecmar/Wangtek MicroChannel Qic-02   xnx166
SCO XENIX      2.3.2     n386      Select Pipe Support                  xnx141
SCO XENIX      2.3.1     386AT     Serial Console Driver                xnx119
SCO XENIX      2.3.1     386AT     Delayed Boot                         xnx126
SCO XENIX      2.3.1     386AT     Tecmar/Wangtek Qic-02 Single Driver  xnx149
SCO XENIX      2.3.1     ALL_AT    Mountain Multiple Tape Driver        xnx102
SCO XENIX      2.3.1     n386      ps(C) seek Supplement                xnx120
SCO XENIX      2.3.0     386AT     Parallel Printing                    xnx115
SCO XENIX      2.3.0     386AT     RTS/CTS Handshaking                  xnx105
SCO XENIX      2.3.0     386AT     Excelan TCP/IP                       xnx104
SCO XENIX      2.3.0     386AT     fsck Supplement                      xnx124
SCO XENIX      2.3.0     386AT     Update R Supplement                  xnx137
SCO XENIX      2.3.0     386AT     386 UUCP Binaries                    xnx129
SCO XENIX      2.3.0     386GT     Adaptec High Performance SCSI Drive  xnx252
SCO XENIX      2.3.0     n386      MAPKEY Supplement                    xnx116
SCO XENIX      2.3.0     n386      SCO Xenix 386 Maintenance Supplemen  xnx155
SCO XENIX      2.2.3     286AT     /etc/rc                              xnx107
SCO XENIX      2.2.3     286AT     VGA Driver                           xnx084
SCO XENIX      2.2.3     286AT     Hercules Plus                        xnx113
SCO XENIX      2.2.3     386AT     VGA Driver                           xnx086
SCO XENIX      2.2.3     386AT     Compaq 386/SX                        xnx095
SCO XENIX      2.2.3     386PS     IBM PS/2 Maintenance Supplement      xnx106
SCO XENIX      2.2.3     386PS     Sun River Driver                     xnx134
SCO XENIX      2.2.3     386PS     QIC-40 Tape Driver                   xnx150
SCO XENIX      2.2.3     386PS     IBM PS/2 Model 70/80                 xnx117
SCO XENIX      2.2.3     ALL_AT    Internal Modem Supplement            xnx128
SCO XENIX      2.2.3     ALL_AT    WD1007A Hard Disk Controller         xnx133
SCO XENIX      2.2.3     n286      Irwin Tape Drivers                   xnx146
SCO XENIX      2.2.3     n286      Cron Supplement                      xnx080
SCO XENIX      2.2.3     n386      Qic-40/Qic-80 Tape Device Driver     xnx118
SCO XENIX      2.2.2     286PS     IBM PS/2 Model 50Z                   xnx103
SCO XENIX      2.2.2     386AT     Intel Errata 20                      xnx090
SCO XENIX      2.2.2     386AT     MS-BASIC Compatibility               xnx074
SCO XENIX      2.2.2     386PS     Tecmar Microchannel Tape Driver      xnx094
SCO XENIX      2.2.2     ALL_PS    Archive Microchannel                 xnx122






Product        Version   Machine   Title                                 SLS #

SCO XENIX      2.2.1     386AT     Logger Supplement                    xnx076
SCO XENIX      2.2.1     ALL_AT    Archive/Tecmar Tape Driver           xnx097
SCO XENIX      2.2.1     n286      Large Disk Bad Track                 xnx057
SCO XENIX      2.2.1     n286      Terminfo Database                    xnx059
SCO XENIX      2.2.0     n286      sort(C) Supplement                   xnx002
SCO XENIX      2.2.0     n286      cu(C) Lock Files                     xnx030
SCO XENIX      2.2.0     n286      Mountain QIC-02 Tape Driver          xnx071
SCO XENIX      2.2.0     n286      Telebit Modem and uucico             xnx072
SCO XENIX      2.2.0     n86       Termcap Database                     xnx101
SCO XENIX      2.2.0     n86       USENET News                          xnx143

UNIX Dev Sys   3.2.0     U386      International Crypt SLS              lng225
UNIX Dev Sys   3.2.0     n386      SCO UNIX Dev Sys Utilities           lng161
UNIX Dev Sys   3.2.0     n386      XPG2 Support Level Supplement        lng090

UNIX/XENIX Dev 2.3.0     n386      /lib/ldr Support Level Supplement    lng238

XENIX Dev Sys  2.3.1     n386      2.3.1 Development System Supplement  lng244
XENIX Dev Sys  2.2.0     286       Development System Update            lng061
XENIX Dev Sys  2.2.0     286AT     Shared Data                          lng056
XENIX Dev Sys  2.2.0     386       Development System Update            lng060
XENIX Dev Sys  2.2.0     n286      Mouse Driver Example                 lng044
XENIX Dev Sys  2.2.0     n386      Device Driver Documentation          lng062
XENIX Dev Sys  2.1.3     286AT     DOS Floating Point Libraries         lng013

SCO CGI        1.1.0     n286      HP 7475A Plotter Supplement          lng088

MS Word        5.0.0     n386      MS Word Printer Supplement           app189
MS Word        5.0.0     n386      International Keyboard Supplement    app198
MS Word        3.0.1     n286      MS WORD termdesc/ipa Supplement      app099

SCO Fox+       2.0.0     OTHER     Fox/Pro Postscript Translator        app196
SCO Fox+       1.0.4c    IBMRT     SCO FoxBASE+ 1.0.4c SLS for the IBM  app147
SCO Fox+       1.0.4     ATT3B     /usr/lib/foxplus/termcap for AT&T 3  app094
SCO Fox+       1.0.4     IBMRT     SCO FoxBASE+ for the IBM/RT Form Su  app187

SCO Fox        1.0.1     n286      cron(C), at(C) Supplement            app042

Informix       3.30.12y  n286      Memory Use Improvements              app077

SCO NFS/ODT-PS 1.1.0     U386      PC NFS                               lng230
SCO NFS/ODT-PS 1.0.0     U386      ODT-NET (NFS) Serialization          lng218

SCO TCP/IP/ODT 1.1.1     KU386     TCP/ip Driver Supplement             lng227

SCO SNA-PI0    1.0.0     n386      386 PI0 Libraries                    app093

Multiview Deskt1.0.0     n386      New Communications File              app203

LPI-BASIC      02.07.02  386AT     LPI-BASIC Update 02.12.00            lng081

LPI-COBOL      05.41.00  n386      LPI-COBOL Update rev. 05.65.00       lng084

LPI-PASCAL     02.08.00  n386      LPI-PASCAL Update 02.11.00           lng083

LPI-PL/1       03.05.10  n386      LPI-PL/1 Update 03.05.20             lng077








Product        Version   Machine   Title                                 SLS #


All                                SCO Online Support (SOS) Informatio  xnx121
All                      n86       DiSCOver Articles                    xnx114




Page 1  XENIX Operating System Support Level Supplements as of 11/30/90


===========================================================================

SLS #xnx259     Additional Hard Drive Supplement

For SCO XENIX                  version: 2.32        machine: 386GT
Available on: 96tpi, 135tpi
Submitted on: 10/01/90
Description:
   This Support Level Supplement will allow for the installation of additional
   hard drive types under SCO XENIX 386GT.
   
===========================================================================

SLS #xnx252     Adaptec High Performance SCSI Drivers

For SCO XENIX                  version: 2.3.0 to 2.3.2   machine: 386GT
Available on: 48tpi, 135tpi
Submitted on: 09/01/90
Description:
   This Support Level Supplement improves performance of SCSI drivers under SCO
   XENIX 386GT.  Not for use with SCO XENIX 386AT or SCO XENIX 286.
   Revision B
===========================================================================

SLS #xnx232     SCO ESDI Supplement for SCO XENIX 386 MCA

For SCO XENIX                  version: 2.3.2       machine: 386MC
Available on: 135tpi
Submitted on: 08/01/90
Description:
   This Support Level Supplement provides ESDI support to SCO XENIX for 386
   computers based on Micro Channel architecture (MCA) for IBM machines,
   Models 55SX, 65SX, 70 and 80.
===========================================================================

SLS #xnx231     SCO ESDI Supplement for SCO XENIX 286 MCA

For SCO XENIX                  version: 2.3.2       machine: 286PS
Available on: 135tpi
Submitted on: 09/01/90
Description:
   This Support Level Supplement provides ESDI support for SCO XENIX for 286
   computers based on Micro Channel Architecture (MCA) for IBM machines,
   Models 50 and 60.
===========================================================================

SLS #xnx171     16Mb Support for C & T Chip Set

For SCO XENIX                  version: 2.3.2       machine: 386MC
Available on: 135tpi
Submitted on: 06/01/90
Description:
   This Support Level Supplement disallows DMA in the top 128Kb of memory when
   running SCO XENIX 386MC Operating System Release 2.3.2, and using the Chips
   and Technologies chip set.
===========================================================================







Page 2  XENIX Operating System Support Level Supplements as of 11/30/90


===========================================================================

SLS #xnx170     Support for 2 Adaptec 1640's

For SCO XENIX                  version: 2.3.2       machine: 386MC
Available on: 135tpi
Submitted on: 06/01/90
Description:
   This Support Level Supplement modifies the Adaptec Driver to allow
   installation of 2 host adapters.
   
===========================================================================

SLS #xnx166     Tecmar/Wangtek MicroChannel Qic-02 Single Chip Tape Driver

For SCO XENIX                  version: 2.3.2       machine: 386PS
Available on: 135tpi
Submitted on: 02/01/90
Description:
   This Support Level Supplement (SLS) xnx166 provides support for the
   Tecmar/Wangtek Micro Channel QIC-02 Single Chip Host Adaptor.
   
===========================================================================

SLS #xnx155     SCO Xenix 386 Maintenance Supplement

For SCO XENIX                  version: 2.3.0 to 2.3.2   machine: n386
Available on: 96tpi, 135tpi
Submitted on: 04/01/90
Description:
   This SCO XENIX 386 Maintenance Supplement UFM corrects and modifies the
   SCO XENIX Release 2.3 kernel and utilities.
   [REVISION A, SUPERCEDED BY REVISION B]
===========================================================================

SLS #xnx151     Intel 303 Installation Supplement

For SCO XENIX                  version: 2.3.2       machine: 386GT
Available on: 96tpi
Submitted on: 11/01/89
Description:
   This Support Level Supplement allows SCO XENIX 386GT Operating System Release
   2.3.2 to operate on an Intel 303 machine.
   
===========================================================================

SLS #xnx150     QIC-40 Tape Driver

For SCO XENIX                  version: 2.2.3       machine: 386PS
Available on: 135tpi
Submitted on: 10/01/89
Description:
   This Support Level Supplement provides support for the QIC-40 tape drives
   under SCO XENIX 386PS Operating System Release 2.2.3.
   
===========================================================================







Page 3  XENIX Operating System Support Level Supplements as of 11/30/90


===========================================================================

SLS #xnx149     Tecmar/Wangtek Qic-02 Single Driver

For SCO XENIX                  version: 2.3.1 to 2.3.2   machine: 386AT
Available on: 48tpi, 135tpi
Submitted on: 02/01/90
Description:
   This Support Level Supplement provides support for the Tecmar/Wangtek Qic-02
   Single Chip Host Adaptor.
   
===========================================================================

SLS #xnx146     Irwin Tape Drivers

For SCO XENIX                  version: 2.2.3 to 2.3.2   machine: n286
Available on: 48tpi, 135tpi
Submitted on: 05/01/90
Description:
   This SLS provides tape drivers for the Irwin series of tape drives, running
   on SCO XENIX 286 and 386 Operating Systems Releases 2.2.3 to 2.3.2. Revision
   C aids in the reduction of problems running SCO XENIX on IBM PS/2 machines.
===========================================================================

SLS #xnx143     USENET News

For SCO XENIX                  version: 2.2.0 to 2.3.2   machine: n86
Available on: 96tpi, 135tpi
Submitted on: 07/21/89
Description:
   This Support Level Supplement contains programs, utilities, and documentation
   to establish a USENET News site and a news feed to UUNET.
   This SLS supercedes the previous USENET News SLS, xnx064.
===========================================================================

SLS #xnx141     Select Pipe Support

For SCO XENIX                  version: 2.3.2       machine: n386
Available on: 96tpi, 135tpi
Submitted on: 06/01/89
Description:
   This Support Level Supplement provides support for the select (s)
   call on pipes.
   
===========================================================================

SLS #xnx137     Update R Supplement

For SCO XENIX                  version: 2.3.0 to 2.3.1   machine: 386AT
Available on: 96tpi, 135tpi
Submitted on: 06/01/89
Description:
   This Support Level Supplement is specifically designed to bring customers
   running SCO XENIX 386 Operating System Release 2.3.0 or 2.3.1 on AT machines
   to Release 2.3.2.
===========================================================================







Page 4  XENIX Operating System Support Level Supplements as of 11/30/90


===========================================================================

SLS #xnx134     Sun River Driver

For SCO XENIX                  version: 2.2.3       machine: 386PS
Available on: 135tpi
Submitted on: 05/01/89
Description:
   This Support Level Supplement provides the Sun River terminal driver
   SCO XENIX Operating System Release 2.2.3 running on IBM PS/2 386 machines.
   
===========================================================================

SLS #xnx133     WD1007A Hard Disk Controller

For SCO XENIX                  version: 2.2.3 to 2.3.2   machine: ALL_AT
Available on: 48tpi, 135tpi
Submitted on: 05/01/89
Description:
   This Support Level Supplement solves problems with hard disk access on
   machines using the Western Digital WD1007A hard disk controller card. All
   systems using this controller card should obtain this supplement.
===========================================================================

SLS #xnx129     386 UUCP Binaries

For SCO XENIX                  version: 2.3.0 to 2.3.1   machine: 386AT
Available on: 96tpi, 135tpi
Submitted on: 07/01/89
Description:
   This SLS contains new UUCP binaries for SCO XENIX 386 Operating System
   Release 2.3.0 and 2.3.1 which correct timing problems and occasional core
   dumping of UUCP processes in these releases.
===========================================================================

SLS #xnx128     Internal Modem Supplement

For SCO XENIX                  version: 2.2.3 to 2.3.2   machine: ALL_AT
Available on: 48tpi, 135tpi
Submitted on: 04/01/89
Description:
   This supplement allows an internal modem to answer incoming calls.
   Previously, the error message "Garbage or loose cable on serial dev x, port
   shut down." was displayed on console.
===========================================================================

SLS #xnx126     Delayed Boot

For SCO XENIX                  version: 2.3.1 to 2.3.2   machine: 386AT
Available on: 96tpi, 135tpi
Submitted on: 03/01/89
Description:
   This supplement provides a new /boot with additional timing delays for 2.3
   kernels larger than 640K that return a boot prompt instead of booting.
   
===========================================================================







Page 5  XENIX Operating System Support Level Supplements as of 11/30/90


===========================================================================

SLS #xnx124     fsck Supplement

For SCO XENIX                  version: 2.3.0 to 2.3.1   machine: 386AT
Available on: 48tpi, 135tpi
Submitted on: 03/01/89
Description:
   This Support Level Supplement provides a new /bin/fsck utility (from the
   2.3.2 386AT Release) that corrects problems with fsck quitting prematurely,
   usually in Phase 1.
===========================================================================

SLS #xnx122     Archive Microchannel

For SCO XENIX                  version: 2.2.2 to 2.2.3   machine: ALL_PS
Available on: 135tpi
Submitted on: 01/01/89
Description:
   This Support Level Supplement adds support for the Archive VP409 Microchannel
   tape system for SCO Xenix 286 and 386 Operating System Release 2.2.2 and
   2.2.3, running on IBM PS/2 machines.
===========================================================================

SLS #xnx121     SCO Online Support (SOS) Information

For All                        version:             machine: 
Available on: Documentation
Submitted on: 01/01/89
Description:
   This document contains answers to the most commonly asked questions
   about SOS, the SCO Online Support System.
   
===========================================================================

SLS #xnx120     ps(C) seek Supplement

For SCO XENIX                  version: 2.3.1       machine: n386
Available on: 48tpi, 135tpi
Submitted on: 01/01/88
Description:
   The ps command in 2.3 halts execution and displays the error message
   "ps: seek error".
   
===========================================================================

SLS #xnx119     Serial Console Driver

For SCO XENIX                  version: 2.3.1       machine: 386AT
Available on: 96tpi, 135tpi
Submitted on: 01/01/89
Description:
   This supplement allows use of a serial console with SCO XENIX 386
   Release 2.3.1. This supplement consists of a modified kernel on a
   revised N1 disk.
===========================================================================







Page 6  XENIX Operating System Support Level Supplements as of 11/30/90


===========================================================================

SLS #xnx118     Qic-40/Qic-80 Tape Device Driver

For SCO XENIX                  version: 2.2.3 to 2.3.2   machine: n386
Available on: 96tpi, 135tpi
Submitted on: 02/01/89
Description:
   This Support Level Supplement provides support for Qic-40/Qic-80 tape drives
   from Alloy, Archive, Mountain, Tecmar and Wangtek.
   (rev.e)
===========================================================================

SLS #xnx117     IBM PS/2 Model 70/80

For SCO XENIX                  version: 2.2.3       machine: 386PS
Available on: 135tpi
Submitted on: 02/01/90
Description:
   This SLS provides a maintenance supplement for the SCO XENIX 386 Operating
   System Release 2.2.2 (and 2.2.3 with Update K installed) for the IBM PS/2.
   (This is xnx117, revision c.)
===========================================================================

SLS #xnx116     MAPKEY Supplement

For SCO XENIX                  version: 2.3.0       machine: n386
Available on: 48tpi, 135tpi
Submitted on: 12/01/88
Description:
   This fix contains a new copy of the mapkey program for SCO XENIX Releases
   2.3.0 and 2.3.1, which allows key files in prior releases to be read in 2.3.
   
===========================================================================

SLS #xnx115     Parallel Printing

For SCO XENIX                  version: 2.3.0       machine: 386AT
Available on: 48tpi, 135tpi
Submitted on: 11/01/88
Description:
   This fix corrects problems with slow parallel printing under SCO XENIX 386
   Operating System Release 2.3.0 and 2.3.1 for AT class machines.
   
===========================================================================

SLS #xnx114     DiSCOver Articles

For All                        version:             machine: n86
Available on: 96tpi, 135tpi
Submitted on: 12/01/88
Description:
   This supplement provides technical articles from the DiSCOver Technical
   Bulletin text files that can be installed on your SCO XENIX system.
   
===========================================================================







Page 7  XENIX Operating System Support Level Supplements as of 11/30/90


===========================================================================

SLS #xnx113     Hercules Plus

For SCO XENIX                  version: 2.2.3 to 2.2.3   machine: 286AT
Available on: 96tpi, 135tpi
Submitted on: 01/01/89
Description:
   This Support Level Supplement corrects the loss of output and the appearance
   of spurious graphics characters when using the Hercules Graphics PLUS card
   with SCO Xenix 286 Operating System Release 2.2.3.
===========================================================================

SLS #xnx107     /etc/rc

For SCO XENIX                  version: 2.2.3       machine: 286AT
Available on: 48tpi
Submitted on: 10/01/88
Description:
   Provides a full /etc/rc file to replace the truncated /etc/rc included in
   the standard distribution.
   
===========================================================================

SLS #xnx106     IBM PS/2 Maintenance Supplement

For SCO XENIX                  version: 2.2.3       machine: 386PS
Available on: 135tpi
Submitted on: 02/01/90
Description:
   Maintenance Supplement for SCO Xenix Operating System release 2.2.3 for
   the IBM PS/2.  This is revision C for the Support Level Supplement (SLS)
   Xnx106.
===========================================================================

SLS #xnx105     RTS/CTS Handshaking

For SCO XENIX                  version: 2.3.0       machine: 386AT
Available on: 96tpi, 135tpi
Submitted on: 10/01/88
Description:
   Corrects problems using RTS/CTS handshaking.
   
   
===========================================================================

SLS #xnx104     Excelan TCP/IP

For SCO XENIX                  version: 2.3.0 to 2.3.1   machine: 386AT
Available on: 96tpi
Submitted on: 10/01/88
Description:
   Allows Excelan TCP/IP driver 8011-05 Version 9 to work with SCO XENIX Release
   2.3.0 and 2.3.1.
   
===========================================================================







Page 8  XENIX Operating System Support Level Supplements as of 11/30/90


===========================================================================

SLS #xnx103     IBM PS/2 Model 50Z

For SCO XENIX                  version: 2.2.2 to 2.2.3   machine: 286PS
Available on: 135tpi
Submitted on: 10/01/88
Description:
   This allows installation on the 30mb IBM PS/2 Model 50Z. It requires the
   N diskettes from the SCO XENIX 286 Release 2.2.3 for the PS/2.
   
===========================================================================

SLS #xnx102     Mountain Multiple Tape Driver

For SCO XENIX                  version: 2.3.1 to 2.3.2   machine: ALL_AT
Available on: 48tpi, 135tpi
Submitted on: 11/01/88
Description:
   Allows use of multiple Mountain tape drives in SCO XENIX 286/386 Operating
   System Release 2.3.1 and 2.3.2.
   
===========================================================================

SLS #xnx101     Termcap Database

For SCO XENIX                  version: 2.2.0 to 2.2.3   machine: n86
Available on: 48tpi, 135tpi
Submitted on: 11/01/88
Description:
   Previously unsupported terminals now are described/listed in SCO XENIX
   Operating System Release 2.3. /etc/termcap.
   
===========================================================================

SLS #xnx097     Archive/Tecmar Tape Driver

For SCO XENIX                  version: 2.2.1 to 2.2.3   machine: ALL_AT
Available on: 48tpi, 135tpi
Submitted on: 06/01/88
Description:
   This Support Level Supplement allows Archive SC499R, VP402, and Tecmar QA
   short cards to work with SCO XENIX Release 2.2 AT Class machines.
   
===========================================================================

SLS #xnx095     Compaq 386/SX

For SCO XENIX                  version: 2.2.3       machine: 386AT
Available on: 96tpi
Submitted on: 06/01/88
Description:
   New SCO XENIX "N" volumes for the Compaq "Panther" Model 386S Intel
   P9-based computer.
   
===========================================================================







Page 9  XENIX Operating System Support Level Supplements as of 11/30/90


===========================================================================

SLS #xnx094     Tecmar Microchannel Tape Driver

For SCO XENIX                  version: 2.2.2 to 2.2.3   machine: 386PS
Available on: 135tpi
Submitted on: 07/01/88
Description:
   Device Driver for Tecmar Microchannel Adapter for IBM PS/2 Model 80.
   
   
===========================================================================

SLS #xnx090     Intel Errata 20

For SCO XENIX                  version: 2.2.2 to 2.2.3   machine: 386AT
Available on: 48tpi, 135tpi
Submitted on: 05/01/88
Description:
   This Support Level Supplement will correct problems with the ALR 386/2,
   386/220s and other 386 based machines which intermittently hang under SCO
   Xenix Releases 2.2.2 and 2.2.3. Addresses Intel 386 Errata 20.
===========================================================================

SLS #xnx086     VGA Driver

For SCO XENIX                  version: 2.2.3 to 2.2.3   machine: 386AT
Available on: 96tpi, 135tpi
Submitted on: 07/01/88
Description:
   Corrects the font problem experienced with ATI, IBM, and Olivetti VGA
   cards in EGA mode upon exit from SCO CGI or SCO ImageBuilder.
   
===========================================================================

SLS #xnx084     VGA Driver

For SCO XENIX                  version: 2.2.3 to 2.2.3   machine: 286AT
Available on: 96tpi, 135tpi
Submitted on: 07/01/88
Description:
   This fixes the font problem experienced with ATI, IBM, and Olivetti
   VGA cards in EGA mode, upon exit from SCO CGI or SCO ImageBuilder.
   
===========================================================================

SLS #xnx080     Cron Supplement

For SCO XENIX                  version: 2.2.3 to 2.3.2   machine: n286
Available on: 48tpi, 135tpi
Submitted on: 05/01/88
Description:
   This SLS corrects problem with cron that caused it to incorrectly run jobs
   twice, or not run them at all.
   
===========================================================================







Page 10  XENIX Operating System Support Level Supplements as of 11/30/90


===========================================================================

SLS #xnx076     Logger Supplement

For SCO XENIX                  version: 2.2.1 to 2.2.3   machine: 386AT
Available on: 48tpi, 135tpi
Submitted on: 03/01/88
Description:
   Corrects the problem that gives the error "logger error - bad
   address (errno = 14)" when going into multiuser mode.
   
===========================================================================

SLS #xnx074     MS-BASIC Compatibility

For SCO XENIX                  version: 2.2.2 to 2.2.3   machine: 386AT
Available on: 48tpi
Submitted on: 02/01/88
Description:
   Corrects a 286 system call incompatibility that caused certain programs
   compiled with the Microsoft BASIC compiler to fail.
   
===========================================================================

SLS #xnx072     Telebit Modem and uucico

For SCO XENIX                  version: 2.2.0 to 2.2.3   machine: n286
Available on: 96tpi, 135tpi
Submitted on: 02/01/88
Description:
   Provides a dial program for the Telebit Trailblazer and Racal-Vadic
   9600 baud modems.  This includes a version of uucico and cu that
   accept speeds up to 38400 baud.
===========================================================================

SLS #xnx071     Mountain QIC-02 Tape Driver

For SCO XENIX                  version: 2.2.0       machine: n286
Available on: 48tpi
Submitted on: 02/01/88
Description:
   Provides support for the Mountain QIC-02 tape drive on AT class
   machines.
   
===========================================================================

SLS #xnx059     Terminfo Database

For SCO XENIX                  version: 2.2.1 to 2.2.3   machine: n286
Available on: 48tpi
Submitted on: 09/01/87
Description:
   Corrects a problem with the terminfo compiler, tic(C), which
   produces incorrect compiled terminfo descriptions for some terminals
   
===========================================================================







Page 11  XENIX Operating System Support Level Supplements as of 11/30/90


===========================================================================

SLS #xnx057     Large Disk Bad Track

For SCO XENIX                  version: 2.2.1 to 2.2.3   machine: n286
Available on: 48tpi
Submitted on: 09/01/87
Description:
   Corrects a problem with badtrk(C) that caused the error message
   "couldn't malloc" when scanning large hard disks.
   
===========================================================================

SLS #xnx030     cu(C) Lock Files

For SCO XENIX                  version: 2.2.0 to 2.2.3   machine: n286
Available on: 48tpi
Submitted on: 02/01/87
Description:
   Corrects a problem that caused cu(C) to remove lock files when it
   shouldn't.
   
===========================================================================

SLS #xnx002     sort(C) Supplement

For SCO XENIX                  version: 2.2.0 to 2.2.3   machine: n286
Available on: 48tpi
Submitted on: 02/01/87
Description:
   Corrects problems with sorting floating point numbers, and correctly
   handling null characters in its input.
   
===========================================================================





























Page 12  UNIX Operating System Support Level Supplements as of 11/30/90


===========================================================================

SLS #unx251     SCO UNIX Maintenance Disk Release 1.0

For SCO UNIX                   version: 3.2.0 V2    machine: 386GT
Available on: 48tpi, 135tpi
Submitted on: 09/01/90
Description:
   This Support Level Supplement corrects problems with plock(), 14 character
   directories, and the file system name cache.
   
===========================================================================

SLS #unx235     Custom Update

For SCO UNIX                   version: 3.2.0       machine: U386
Available on: 48tpi, 135tpi
Submitted on: 07/01/90
Description:
   This SLS updates the binaries: tar, compress, uncompress, and idtune on SCO
   UNIX System V/386 Operating System Release 3.2.0, so that installation of
   other SCO products is possible.
===========================================================================

SLS #unx223     SCO Security Supplement

For SCO UNIX                   version: 3.2.0 to 1.0.0   machine: KU386
Available on: 96tpi, 135tpi
Submitted on: 07/01/90
Description:
   This Support Level Supplement addresses problems in SCO UNIX System V 386,
   Release 3.2.0 and SCO Open Desktop, Release 1.0.0.  Adds "addxusers"
   utility to automatically create UNIX users from XENIX password files.
===========================================================================

SLS #unx222     SCO UNIX Irwin Driver

For SCO UNIX/ODT Personal Sys  version: 3.2.0 to 1.0.0   machine: KU386
Available on: 48tpi, 135tpi
Submitted on: 08/01/90
Description:
   This Support Level Supplement allows SCO UNIX System V/386, release 3.2.0 to
   3.2.1 to use Irwin Tape Drives.  It addresses problems found in IBM PS/2
   machines (model 50,60 and 80).
===========================================================================

SLS #unx221     X Select and Networking Library

For SCO ODT Personal System    version: 1.0.0       machine: n386
Available on: 96tpi, 135tpi
Submitted on: 06/01/90
Description:
   This Support Level Supplement provides correct functionality for the X system
   calls XtAddInput and XtAppAddInput.  This SLS corrects problems with the
   linking of X11 and networking libraries.
===========================================================================







Page 13  UNIX Operating System Support Level Supplements as of 11/30/90


===========================================================================

SLS #unx220     Hayes V-Series Modem Support Module

For SCO UNIX/XENIX             version: 2.3 to 3.2.0   machine: n286
Available on: 96tpi, 135tpi
Submitted on: 08/01/90
Description:
   This Support Level Supplement adds Hayes V-Series 9600 modem support to SCO
   Operating Systems.
   
===========================================================================

SLS #unx217     ODT-DOS/Sio

For SCO ODT Personal System    version: 1.0.0       machine: 386GT
Available on: 96tpi, 135tpi
Submitted on: 05/10/90
Description:
   This SLS allows the use of multiple ports on dumb serial multiport boards. It
   also allows a serial mouse to be attached to dumb multiport boards.
   
===========================================================================

SLS #unx208     WD7000 Support Level Supplement

For SCO ODT Personal System    version: 3.2.1 to 1.0.0   machine: 386GT
Available on: 96tpi, 135tpi
Submitted on: 07/01/90
Description:
   This Support Level Supplement allows the SCO Open Desktop Personal System to
   be installed on machines with the WD7000 SCSI Host Adapter.
   
===========================================================================

SLS #unx204     Logitech Busmouse Driver

For SCO UNIX/XENIX             version: 2.3.2 to 3.2.0   machine: n386
Available on: 96tpi, 135tpi
Submitted on: 05/01/90
Description:
   This Support Level Supplement corrects the Logitech busmouse
   initialization problem.
   
===========================================================================

SLS #unx194     Usenet News

For SCO UNIX                   version: 3.2.0       machine: U386
Available on: 96tpi, 135tpi
Submitted on: 03/01/90
Description:
   This Support Level Supplement contains version B release 2.11 of the
   Usenet News software and release notes patchlevel 40, compiled to run
   UNIX
===========================================================================







Page 14  UNIX Operating System Support Level Supplements as of 11/30/90


===========================================================================

SLS #unx186     Adaptec 1640 Supplement

For SCO UNIX                   version: 3.2.0       machine: 386MC
Available on: 135tpi
Submitted on: 01/01/90
Description:
   This Support Level Supplement allows the installation of SCO UNIX System V/
   386 OS Release 3.2.0 on MCA machines with the Adaptec 1640 SCSI controller.
   
===========================================================================

SLS #unx162     Unix Utility Update

For SCO UNIX                   version: 3.2.0       machine: 386GT
Available on: 96tpi, 135tpi
Submitted on: 03/01/90
Description:
   This Support Level Supplement (SLS) unx162 repairs 8 bit parallel port
   problem, adds robustness to SCSI drivers and fixes miscellaneous
   utilities.
===========================================================================








































Page 15  Languages and Development Support Level Supplements as of 11/30/90


===========================================================================

SLS #lng244     2.3.1 Development System Supplement

For SCO XENIX Development Sys  version: 2.3.1       machine: n386
Available on: 96tpi, 135tpi
Submitted on: 08/01/90
Description:
   This Support Level Supplement contains new 286 and 386 C compiler passes and
   event libraries and new Incremental Loader (ldr) for SCO XENIX Development
   System, Release 2.3.1.
===========================================================================

SLS #lng238     /lib/ldr Support Level Supplement

For SCO UNIX/XENIX Dev Sys     version: 2.3.0 to 3.2.0   machine: n386
Available on: 48tpi, 135tpi
Submitted on: 07/01/90
Description:
   This Support Level Supplement addresses problems where the incremental loader
   fails to link modules which have static functions declared.
   
===========================================================================

SLS #lng230     PC NFS

For SCO NFS/ODT Personal Syst  version: 1.1.0 to 1.0.0   machine: U386
Available on: 48tpi, 135tpi
Submitted on: 07/01/90
Description:
   This Support Level Supplement provides NFS server capability for DOS NFS
   products.
   
===========================================================================

SLS #lng227     TCP/ip Driver Supplement

For SCO TCP/IP/ODT Personal S  version: 1.1.1       machine: KU386
Available on: 48tpi, 135tpi
Submitted on: 07/01/90
Description:
   This Support Level Supplement replaces the icmp,tcp,cp and udp protocol
   drivers. It also contains a new /etc/cpd binary, which prevents unwanted
   network broadcasts. Applicable only to SCO TCP/IP for SCO UNIX or ODT PS.
===========================================================================

SLS #lng225     International Crypt SLS

For SCO UNIX Development Syst  version: 3.2.0       machine: U386
Available on: 48tpi, 135tpi
Submitted on: 07/01/90
Description:
   This Support Level Supplement provides the International Crypt Library, and
   may be shipped to customers outside of the Continental United States.
   [Revision B]
===========================================================================







Page 16  Languages and Development Support Level Supplements as of 11/30/90


===========================================================================

SLS #lng218     ODT-NET (NFS) Serialization

For SCO NFS/ODT Personal Syst  version: 1.0.0       machine: U386
Available on: 96tpi, 135tpi
Submitted on: 05/10/90
Description:
   This Support Level Supplement (SLS) provides NFS Server capability for the
   SCO Open Desktop Personal System Release 1.0.0.
   
===========================================================================

SLS #lng190     SCO Xenix/Unix Crypt Support

For SCO UNIX/XENIX             version: 2.2.3 to 3.2.0   machine: n386
Available on: 96tpi, 135tpi
Submitted on: 02/01/90
Description:
   This Support Level Supplement (SLS) provides crypt libraries and editor
   binaries for SCO XENIX and UNIX Operating Systems.  This supplement
   obsoletes lng073.  May be shipped to domestic destinations only.
===========================================================================

SLS #lng161     SCO UNIX Dev Sys Utilities

For SCO UNIX Development Syst  version: 3.2.0       machine: n386
Available on: 48tpi, 135tpi
Submitted on: 12/01/89
Description:
   This SLS provides newer versions of the SCO UNIX Development System utilities
   which include cvtcoff, cvtomf, ar, ld, nm, size, strip, sdb, prof, ranlib,
   and a new libm.a math library enhanced for speed.
===========================================================================

SLS #lng090     XPG2 Support Level Supplement

For SCO UNIX Development Syst  version: 3.2.0       machine: n386
Available on: 96tpi
Submitted on: 07/01/90
Description:
   This Support Level Supplement allows SCO UNIX System V 386 Release 3.2.0
   to make it XPG2 complient.
   
===========================================================================

SLS #lng088     HP 7475A Plotter Supplement

For SCO CGI                    version: 1.1.0       machine: n286
Available on: 96tpi, 135tpi
Submitted on: 10/01/89
Description:
   This Support Level Supplement corrects handshaking problems with the HP
   plotter agent.
   
===========================================================================







Page 17  Languages and Development Support Level Supplements as of 11/30/90


===========================================================================

SLS #lng084     LPI-COBOL Update rev. 05.65.00

For LPI-COBOL                  version: 05.41.00 to 05.61.00   machine: n386
Available on: 96tpi, 135tpi
Submitted on: 03/01/89
Description:
   This supplement includes enhancements to the compiler, support for alternate
   character sets, improvements on the ACCEPT command's capabilities, & the SORT
   statement now processes files with record sizes exceeding 1019 characters.
===========================================================================

SLS #lng083     LPI-PASCAL Update 02.11.00

For LPI-PASCAL                 version: 02.08.00 to 02.10.00   machine: n386
Available on: 96tpi, 135tpi
Submitted on: 06/01/89
Description:
   This Support Level Supplement improves the compiler so that it now correctly
   compiles external function definitions.
   
===========================================================================

SLS #lng081     LPI-BASIC Update 02.12.00

For LPI-BASIC                  version: 02.07.02 to 02.09.02   machine: 386AT
Available on: 96tpi, 135tpi
Submitted on: 02/01/89
Description:
   This supplement has the following enhancements: MODE2 in open stmnt is now
   case insensitive. Tabbing past the margin has been fixed. Precision problems
   of single float data types have been corrected.
===========================================================================

SLS #lng077     LPI-PL/1 Update 03.05.20

For LPI-PL/1                   version: 03.05.10    machine: n386
Available on: 96tpi, 135tpi
Submitted on: 12/01/88
Description:
   Lng077 updates previous versions of LPI-PL/1 to version 03.05.20.  Problems
   corrected include opening STREAM OUTPUT FILES with the -APPEND option, and
   using  SUBSTR as a pseudo-variable with an aligned bit argument.
===========================================================================

SLS #lng062     Device Driver Documentation

For SCO XENIX Development Sys  version: 2.2.0 to 2.2.3   machine: n386
Available on: Documentation
Submitted on: 10/01/87
Description:
   Documentation describing additional device driver support routines
   provided by the SCO XENIX 386 kernel.
   
===========================================================================







Page 18  Languages and Development Support Level Supplements as of 11/30/90


===========================================================================

SLS #lng061     Development System Update

For SCO XENIX Development Sys  version: 2.2.0       machine: 286
Available on: 96tpi, 135tpi
Submitted on: 09/01/87
Description:
   Enhancements and fixes to the SCO XENIX Release 2.2.0 Development
   System for 286-based machines only.  Order lng060 for 386-based machines.
   
===========================================================================

SLS #lng060     Development System Update

For SCO XENIX Development Sys  version: 2.2.0       machine: 386
Available on: 96tpi, 135tpi
Submitted on: 09/01/87
Description:
   Enhancements and fixes to the SCO XENIX Release 2.2.0 Development
   System, for 386-based machines only. Order SLS number xnx061 for 286
   -based machines.
===========================================================================

SLS #lng056     Shared Data

For SCO XENIX Development Sys  version: 2.2.0 to 2.2.1   machine: 286AT
Available on: 48tpi
Submitted on: 09/01/87
Description:
   Corrects several problems with shared data and shared memory in
   SCO XENIX Releases 2.2.0 and 2.2.1.
   
===========================================================================

SLS #lng044     Mouse Driver Example

For SCO XENIX Development Sys  version: 2.2.0 to 2.2.1   machine: n286
Available on: 48tpi
Submitted on: 07/01/87
Description:
   Example mouse device driver.  This is for information only, it is
   not supported.
   
===========================================================================

SLS #lng013     DOS Floating Point Libraries

For SCO XENIX Development Sys  version: 2.1.3       machine: 286AT
Available on: 48tpi
Submitted on: 02/01/87
Description:
   Adds DOS floating point libraries used by the -FP flag that were
   omitted from Release 2.1.3 of the Development System.
   
===========================================================================







Page 19  Applications Support Level Supplements as of 11/30/90


===========================================================================

SLS #app203     New Communications File

For SCO Multiview Desktop      version: 1.0.0       machine: n386
Available on: 48tpi, 135tpi
Submitted on: 05/01/90
Description:
   This Support Level Supplement (SLS) contains a new mvw_ixsru file for
   JSB Multiview Desktop 1.0.0.
   
===========================================================================

SLS #app198     International Keyboard Supplement

For Microsoft Word             version: 5.0.0       machine: n386
Available on: 96tpi, 135tpi
Submitted on: 03/01/90
Description:
   This Support Level Supplement (SLS) is intended for users with non-english
   keyboards.  It also includes a fix for the existing MS Word 5.0.0 product
   regarding random "signal 11 received" word terminated error.
===========================================================================

SLS #app196     Fox/Pro Postscript Translator

For SCO FoxBASE+               version: 2.0.0 to 2.1.1   machine: OTHER
Available on: 135tpi, QIC Tape
Submitted on: 03/01/90
Description:
   This Support Level Supplement (SLS) app196 includes ASCII to postscript
   filter for SCO Foxbase+ 2.1.1 and SCO Professional 2.0.0 on the Sun
   Operating System.
===========================================================================

SLS #app189     MS Word Printer Supplement

For Microsoft Word             version: 5.0.0       machine: n386
Available on: 96tpi, 135tpi
Submitted on: 02/01/90
Description:
   This Support Level Supplement (SLS) provides additional printer files (.prx)
   not included in the MS Word 5.0.0 package.
   
===========================================================================

SLS #app187     SCO FoxBASE+ for the IBM/RT Form Supplement

For SCO FoxBASE+               version: 1.0.4       machine: IBMRT
Available on: 96tpi
Submitted on: 03/01/90
Description:
   This Support Level Supplement (SLS) solves some of the problems present
   in porting form files from other Operating Systems to the IBM/RT.
   
===========================================================================







Page 20  Applications Support Level Supplements as of 11/30/90


===========================================================================

SLS #app147     SCO FoxBASE+ 1.0.4c SLS for the IBMRT

For SCO FoxBASE+               version: 1.0.4c      machine: IBMRT
Available on: 96tpi
Submitted on: 09/01/89
Description:
   This Support Level Supplement corrects problems such as null date fields
   and illegal seek errors with memo fields.
   
===========================================================================

SLS #app099     MS WORD termdesc/ipa Supplement

For Microsoft Word             version: 3.0.1 to 3.0.3   machine: n286
Available on: 48tpi, 135tpi
Submitted on: 06/01/89
Description:
   This Support Supplement corrects some problems found in MS WORD Release
   3.0.1 through 3.0.3 with the vt100 and wyse50 termdesc entries, and with
   the interactive printing. It also provides support for the IBM 3151 terminal.
===========================================================================

SLS #app094     /usr/lib/foxplus/termcap for AT&T 3B2

For SCO FoxBASE+               version: 1.0.4       machine: ATT3B
Available on: 96tpi
Submitted on: 03/01/89
Description:
   This copy of /usr/lib/foxplus/termcap replaces the termcap originally shipped
   with SCO FoxBASE+, release 1.0.4 for the AT&T 3B2.
   
===========================================================================

SLS #app093     386 PI0 Libraries

For SCO uniPATH SNA-PI0        version: 1.0.0       machine: n386
Available on: 96tpi, 135tpi
Submitted on: 02/01/89
Description:
   This Support Level Supplement provides 386 libraries for the SCO uniPATH
   Programmatic Interface 0 Mainframe Communication Package.
   
===========================================================================

SLS #app077     Memory Use Improvements

For Informix                   version: 3.30.12y    machine: n286
Available on: 48tpi
Submitted on: 03/01/88
Description:
   This SLS corrects problems with perform (and other Informix utilities)
   running out of memory.
   
===========================================================================







Page 21  Applications Support Level Supplements as of 11/30/90


===========================================================================

SLS #app042     cron(C), at(C) Supplement

For SCO FoxBASE                version: 1.0.1 to 1.0.3   machine: n286
Available on: 48tpi
Submitted on: 07/01/87
Description:
   This SLS allows SCO FoxBASE to work correctly when called by cron(C) or at(C
   This does not apply to SCO FoxBASE+.
   
===========================================================================


SCO Support Level Supplements Available via UUCP

Selected Support Level Supplements (SLS) are available for anonymous
UUCP transfer.  Anonymous UUCP means that anyone who knows the phone number
and the login name can access.  The login name to use is "uusls" (the fourth
character is the letter "l" rather than the numeral "1"), and there is no
password.  The system name is "sosco".  There are two modems available: a
2400-baud modem at (408) 425-3502, and a Telebit Trailblazer 9600-baud modem
at (408) 429-1786.  Users should be familiar with UUCP transfers, and must
set up their system for UUCP transfer as described in the chapter "Building
a Remote Network with UUCP" in the SCO System Administrator's Guide.

All files reside in the directory /usr/spool/uucppublic/SLS.  The first file
that should be requested is /usr/spool/uucppublic/SLS/info.  This file
contains the names of all the other files that are available, and
instructions on how to install the SLS's once they have been received.
The info file will be updated as new SLS's are added, so customers
can periodically obtain this file to check for SLS's that have been
added to the system.

Not all SLS's will be available for uucp.  SLS's that would not be
appropriate are those which correct problems with a product installation,
or consist of a substantial portion of a product.


-- 
bill davidsen	(davidsen at crdos1.crd.GE.COM -or- uunet!crdgw1!crdos1!davidsen)
    VMS is a text-only adventure game. If you win you can use unix.



More information about the Comp.unix.sysv386 mailing list