FAS 2.07 async driver, part 3/3

Uwe Doering gemini at geminix.in-berlin.de
Wed Sep 19 05:15:05 AEST 1990


#!/bin/sh
# this is fas207.03 (part 3 of a multipart archive)
# do not concatenate these parts, unpack them in order with /bin/sh
# file fas.c continued
#
if test ! -r _shar_seq_.tmp; then
	echo 'Please unpack part 1 first!'
	exit 1
fi
(read Scheck
 if test "$Scheck" != 3; then
	echo Please unpack part "$Scheck" next!
	exit 1
 else
	exit 0
 fi
) < _shar_seq_.tmp || exit 1
if test ! -f _shar_wnt_.tmp; then
	echo 'x - still skipping fas.c'
else
echo 'x - continuing file fas.c'
sed 's/^X//' << 'SHAR_EOF' >> 'fas.c' &&
X				   with different line settings
X				*/
X				outb (LINE_CTL_PORT, lcrval [i]);
X
X				/* wait until the transmitter register
X				   is empty
X				*/
X				for (delay_count = 20000;
X					delay_count && (~inb (LINE_STATUS_PORT)
X							& (LS_XMIT_AVAIL
X							  | LS_XMIT_COMPLETE));
X					delay_count--)
X					;
X
X				if (!delay_count)
X				{
X					done = 2;
X					break;
X				}
X
X				/* send test pattern */
X				outb (XMT_DATA_PORT, *cptr);
X
X				/* wait until the test pattern is received */
X				for (delay_count = 20000;
X					delay_count && ((inb (LINE_STATUS_PORT)
X								& LS_RCV_INT)
X							!= LS_RCV_AVAIL);
X					delay_count--)
X					;
X
X				if (!delay_count)
X				{
X					done = 3;
X					break;
X				}
X
X				/* check test pattern */
X				if (inb (RCV_DATA_PORT) != *cptr)
X				{
X					done = 4;
X					break;
X				}
X			}
X
X			if (done)
X				break;
X		} while (*cptr++);
X	}
X
X	if (!done)
X	{
X		/* wait until the transmitter register is empty */
X		for (delay_count = 20000;
X			delay_count && (~inb (LINE_STATUS_PORT)
X					& (LS_XMIT_AVAIL | LS_XMIT_COMPLETE));
X			delay_count--)
X			;
X
X		if (!delay_count)
X			done = 5;
X	}
X
X	if (!done)
X	{
X		/* test pattern */
X		cptr = (unchar *) "\005\142\012\237\006\130\011\257\017\361\0\017\0\0";
X
X		/* clear delta bits */
X		inb (MDM_STATUS_PORT);
X
X		do
X		{
X			/* test modem control and status lines */
X			outb (MDM_CTL_PORT, *cptr | MC_SET_LOOPBACK);
X			if (inb (MDM_STATUS_PORT) != *(cptr + 1))
X			{
X				done = 6;
X				break;
X			}
X		} while (*((ushort *) cptr)++);
X	}
X
X	/* switch back to normal operation */
X	outb (MDM_CTL_PORT, 0);
X
X	return (done);
X}
X
X#if defined (NEED_PUT_GETCHAR)
X
Xint
Xasyputchar (arg1)
Xunchar	arg1;
X{
X	register struct	fas_info	*fip;
X	REGVAR;
X
X	if (!fas_is_initted)
X		(void) fasinit ();
X
X	fip = &fas_info [0];
X	if (fip->device_flags.i & DF_DEVICE_CONFIGURED)
X	{
X		while (!(inb (LINE_STATUS_PORT) & LS_XMIT_AVAIL))
X			;
X		outb (XMT_DATA_PORT, arg1);
X		if (arg1 == 10)
X			(void) asyputchar (13);
X	}
X	return (0);
X}
X
Xint
Xasygetchar ()
X{
X	register struct	fas_info	*fip;
X	REGVAR;
X
X	if (!fas_is_initted)
X		(void) fasinit ();
X
X	fip = &fas_info [0];
X	if ((fip->device_flags.i & DF_DEVICE_CONFIGURED)
X		&& (inb (LINE_STATUS_PORT) & LS_RCV_AVAIL))
X		return (inb (RCV_DATA_PORT));
X	else
X		return (-1);
X}
X#endif
X
X#if defined (NEED_INIT8250)
X
X/* reset the requested port to be used directly by a DOS process */
Xint
Xinit8250 (port, ier)
Xushort	port, ier;	/* ier not used in this stub */
X{
X	register struct fas_info	*fip;
X	register uint	physical_unit;
X	int	old_level;
X	REGVAR;
X
X	/* See if the port address matches a port that is used by
X	   the fas driver.
X	*/
X	for (physical_unit = 0; physical_unit < fas_physical_units;
X			physical_unit++)
X		if (port == fas_port [physical_unit])
X			break;
X
X	if (physical_unit >= fas_physical_units)
X		return (-1);	/* port didn't match */
X
X	fip = fas_info_ptr [physical_unit];
X
X	old_level = SPLINT ();
X
X	fip->ier = IE_NONE;
X	outb (INT_ENABLE_PORT, fip->ier);
X	if (INT_ACK_PORT)
X		outb (INT_ACK_PORT, fip->int_ack);
X
X	fip->mcr &= ~fip->flow.m.ic;
X	outb (MDM_CTL_PORT, fip->mcr);
X
X	if (fip->device_flags.i & DF_DEVICE_IS_NS16550)
X		outb (NS_FIFO_CTL_PORT, STANDARD_NS_FIFO_CLEAR);
X	else if (fip->device_flags.i & DF_DEVICE_IS_I82510)
X	{
X		outb (I_BANK_PORT, I_BANK_1);
X		outb (I_TCM_PORT, I_FIFO_CLR_XMIT);
X		outb (I_RCM_PORT, I_FIFO_CLR_RECV);
X		outb (I_BANK_PORT, I_BANK_2);
X		outb (I_IDM_PORT, STANDARD_I_FIFO_CLEAR);
X		outb (I_BANK_PORT, I_BANK_0);
X	}
X
X	inb (MDM_STATUS_PORT);
X	inb (RCV_DATA_PORT);
X	inb (RCV_DATA_PORT);
X	inb (LINE_STATUS_PORT);
X	inb (INT_ID_PORT);
X	(void) splx (old_level);
X	return (0);
X}
X#endif
SHAR_EOF
echo 'File fas.c is complete' &&
true || echo 'restore of fas.c failed'
rm -f _shar_wnt_.tmp
fi
# ============= fas.h ==============
if test -f 'fas.h' -a X"$1" != X"-c"; then
	echo 'x - skipping fas.h (File already exists)'
	rm -f _shar_wnt_.tmp
else
> _shar_wnt_.tmp
echo 'x - extracting fas.h (Text)'
sed 's/^X//' << 'SHAR_EOF' > 'fas.h' &&
X/* This file contains various defines for the FAS async driver.
X   If you change anything here you have to recompile the driver module.
X*/
X
X#ident	"@(#)fas.h	2.07"
X
X#include <sys/param.h>
X#include <sys/types.h>
X#include <sys/signal.h>
X#include <sys/buf.h>
X#include <sys/iobuf.h>
X#include <sys/dir.h>
X#if defined (XENIX)
X#include <sys/page.h>
X#include <sys/seg.h>
X#endif
X#include <sys/user.h>
X#include <sys/errno.h>
X#include <sys/tty.h>
X#include <sys/conf.h>
X#include <sys/sysinfo.h>
X#include <sys/file.h>
X#if !defined (XENIX)
X#include <sys/termio.h>
X#endif
X#include <sys/ioctl.h>
X#include <macros.h>
X
X#if defined (XENIX)
Xtypedef unsigned char	unchar;
X#endif
X
X#if defined (TRUE)
X#undef TRUE
X#endif
X#define	TRUE	(1)
X
X#if defined (FALSE)
X#undef FALSE
X#endif
X#define FALSE	(0)
X
X/* Uncomment the following line if you need asyputchar and asygetchar.
X   This is only required if you link the kernel without the original
X   asy driver and these functions aren't provided by any other kernel
X   module.
X*/
X/* #define NEED_PUT_GETCHAR	/* */
X
X/* Uncomment the following line if you have VP/ix support in the
X   kernel.
X*/
X/* #define HAVE_VPIX	/* */
X
X/* Uncomment the following line if you need init8250. DosMerge needs
X   this function, but only if you link the kernel without the original
X   asy driver.
X*/
X/* #define NEED_INIT8250	/* */
X
X/* Initial line control register.  Value will only be meaningful for
X   asyputchar and asygetchar and they are only meaningful if
X   NEED_PUT_GETCHAR is defined.
X*/
X#define	INITIAL_LINE_CONTROL	LC_WORDLEN_8
X
X/* Initial baud rate.  Value will only be meaningful for
X   asyputchar and asygetchar and they are only meaningful if
X   NEED_PUT_GETCHAR is defined.
X*/
X#define INITIAL_BAUD_RATE	(BAUD_BASE/9600)
X
X/* Initial modem control register.  This should probably not have to
X   be touched.  It is here because some terminals used as the console
X   require one or more of the modem signals set. It is only meaningful
X   for asyputchar and asygetchar and they are only meaningful if
X   NEED_PUT_GETCHAR is defined.
X*/
X#define INITIAL_MDM_CONTROL	0
X
X#if defined (HAVE_VPIX)
X#if !defined (XENIX)
X#include <sys/tss.h>
X#include <sys/immu.h>
X#include <sys/region.h>
X#endif
X#include <sys/proc.h>
X#include <sys/v86.h>
X#endif
X
X/****************************************************/
X/* Nothing past this line should have to be changed */
X/****************************************************/
X
X#define NUM_INT_VECTORS	16	/* sixteen vectors possible but only
X				   the first eight are normally used
X				*/
X
X#define MAX_UNITS	16	/* we will only use that many units */
X
X/* Miscellaneous Constants */
X
X#define BAUD_BASE	(1843200 / 16)	/* 115200 bps */
X#define HANGUP_DELAY	((HZ) / 4)	/* 250 msec */
X#define HANGUP_TIME	(HZ)		/* 1 sec */
X#define BREAK_TIME	((HZ) / 4)	/* 250 msec */
X#define EVENT_TIME	1		/* 1 clock tick (must be > 0) */
X#define	RECV_BUFF_SIZE	5000		/* receiver ring buffer size (MAX) */
X#define SW_LOW_WATER	2500	/* 50% MAX	sw flow control */
X#define SW_HIGH_WATER	4000	/* 80% MAX	 trigger levels */
X#define HW_LOW_WATER	4200	/* MAX - 800	hw flow control */
X#define HW_HIGH_WATER	4700	/* MAX - 300	 trigger levels */
X#define XMIT_BUFF_SIZE	2500		/* transmitter ring buffer size */
X#define MAX_UNIX_FILL	(TTYHOG)	/* read buffer max UNIX fill level */
X#define MAX_VPIX_FILL	64		/* read buffer max VP/ix fill level */
X#define MIN_READ_CHUNK	32		/* must be <= MAX_????_FILL/2 */
X#define READ_PORT	0x0100		/* read command for fas_init_seq */
X#define SPLWRK		spl5		/* SPL for character processing */
X#if defined (XENIX)
X#define SPLINT		spl7		/* SPL to disable FAS interrupts */
X#else
X#define SPLINT		spltty		/* SPL to disable FAS interrupts */
X#endif
X
X#if (MAX_UNIX_FILL) > (TTYHOG)
X#undef MAX_UNIX_FILL
X#define MAX_UNIX_FILL	(TTYHOG)
X#endif
X
X#if (MAX_VPIX_FILL) > (TTYHOG)
X#undef MAX_VPIX_FILL
X#define MAX_VPIX_FILL	(TTYHOG)
X#endif
X
X#if (MIN_READ_CHUNK) > ((MAX_UNIX_FILL) / 2)
X#undef MIN_READ_CHUNK
X#define MIN_READ_CHUNK	((MAX_UNIX_FILL) / 2)
X#endif
X
X#if (MIN_READ_CHUNK) > ((MAX_VPIX_FILL) / 2)
X#undef MIN_READ_CHUNK
X#define MIN_READ_CHUNK	((MAX_VPIX_FILL) / 2)
X#endif
X
X
X/* Here are the modem control flags for the fas_modem array in space.c.
X   They are arranged in three 8-bit masks which are combined to a 32-bit
X   word. Each of these 32-bit words represents one entry in the fas_modem
X   array.
X
X   The lowest byte is used as a mask to manipulate the modem control
X   register for modem enable. Use the MC_* macros to build the mask.
X
X   The second lowest byte is used to mask signals from the modem status
X   register that will be used as the carrier detect signal. Use the MS_*
X   macros to build the mask and shift them 8 bits to the left. If you use
X   more than one signal, carrier is considered on only when all signals
X   are on.
X
X   The second highes byte is used to mask signals from the modem status
X   register that will be used as the unblock signal. Use the MS_* macros
X   to build the mask and shift them 16 bits to the left. If you use more
X   than one signal, unblock occurs only when all signals are on.
X
X   The highest byte is reserved for future use.
X
X   Here are some useful macros for the space.c file. You may create your
X   own macros if you have some special requirements not met by the
X   predefined ones.
X*/
X
X/* modem enable (choose one) */
X#define EN_RTS			MC_SET_RTS	/* RTS enables modem */
X#define EN_DTR			MC_SET_DTR	/* DTR enables modem */
X#define EN_RTS_AND_DTR		(MC_SET_RTS | MC_SET_DTR)
X
X/* carrier detect signal (choose one) */
X#define CA_DCD			(MS_DCD_PRESENT << 8) /* DCD is carr. detect */
X#define CA_CTS			(MS_CTS_PRESENT << 8) /* CTS is carr. detect */
X#define CA_DSR			(MS_DSR_PRESENT << 8) /* DSR is carr. detect */
X
X/* unblock signal (choose one) */
X#define UB_DCD			(MS_DCD_PRESENT << 16)	/* leading edge ! */
X#define UB_RING			(MS_RING_PRESENT << 16)	/* trailing edge ! */
X
X
X/* Here are the hardware handshake flags for the fas_flow array in space.c.
X   They are arranged in three 8-bit masks which are combined to a 32-bit
X   word. Each of these 32-bit words represents one entry in the fas_flow
X   array.
X
X   The lowest byte is used as a mask to manipulate the modem control
X   register for input flow control. Use the MC_* macros to build the mask.
X
X   The second lowest byte is used to mask signals from the modem status
X   register that will be used for output flow control. Use the MS_* macros
X   to build the mask and shift them 8 bits to the left. If you use more
X   than one signal, output is allowed only when all signals are on.
X
X   The second highest byte is used to mask signals from the modem status
X   register that will be used to enable the output flow control selected
X   by the second lowest byte. Use the MS_* macros to build the mask and
X   shift them 16 bits to the left. If you use more than one signal, output
X   flow control is enabled only when all signals are on.
X
X   The highest byte is reserved for future use.
X
X   Here are some useful macros for the space.c file. You may create your
X   own macros if you have some special requirements not met by the
X   predefined ones.
X*/
X
X/* input flow control (choose one) */
X#define HI_RTS			MC_SET_RTS	/* RTS input flow ctrl */
X#define HI_DTR			MC_SET_DTR	/* DTR input flow ctrl */
X#define HI_RTS_AND_DTR		(MC_SET_RTS | MC_SET_DTR)
X
X/* output flow control (choose one) */
X#define HO_CTS			(MS_CTS_PRESENT << 8) /* CTS output flow ctrl */
X#define HO_DSR			(MS_DSR_PRESENT << 8) /* DSR output flow ctrl */
X#define HO_CTS_AND_DSR		((MS_CTS_PRESENT | MS_DSR_PRESENT) << 8)
X#define HO_CTS_ON_DSR		((MS_CTS_PRESENT << 8) | (MS_DSR_PRESENT << 16))
X#define HO_CTS_ON_DSR_AND_DCD	((MS_CTS_PRESENT << 8) \
X				| ((MS_DSR_PRESENT | MS_DCD_PRESENT) << 16))
X
X
X/* define the local open flags */
X
X#define OS_DEVICE_CLOSED	0x0000
X#define OS_OPEN_FOR_DIALOUT	0x0001
X#define OS_OPEN_FOR_GETTY	0x0002
X#define OS_WAIT_OPEN		0x0004
X#define OS_NO_DIALOUT		0x0008
X#define OS_CHECK_CARR_ON_OPEN	0x0010
X#define OS_FAKE_CARR_ON		0x0020
X#define OS_UNBLOCK_ENABLE	0x0040
X#define OS_CLOCAL		0x0080
X#define OS_HW_HANDSHAKE		0x0100
X#define OS_EXCLUSIVE_OPEN_1	0x0200
X#define OS_EXCLUSIVE_OPEN_2	0x0400	/* SYSV 3.2 Xenix compatibility */
X
X#define OS_OPEN_STATES		(OS_OPEN_FOR_DIALOUT | OS_OPEN_FOR_GETTY)
X#define OS_TEST_MASK		(OS_OPEN_FOR_DIALOUT | OS_NO_DIALOUT \
X				| OS_CHECK_CARR_ON_OPEN | OS_FAKE_CARR_ON \
X				| OS_UNBLOCK_ENABLE | OS_CLOCAL \
X				| OS_HW_HANDSHAKE | OS_EXCLUSIVE_OPEN_1 \
X				| OS_EXCLUSIVE_OPEN_2)
X#define OS_SU_TEST_MASK		(OS_OPEN_FOR_DIALOUT | OS_NO_DIALOUT \
X				| OS_CHECK_CARR_ON_OPEN | OS_FAKE_CARR_ON \
X				| OS_UNBLOCK_ENABLE | OS_CLOCAL \
X				| OS_HW_HANDSHAKE | OS_EXCLUSIVE_OPEN_1)
X
X/* define the device status flags */
X
X#define DF_DEVICE_CONFIGURED	0x0001	/* device is configured */
X#define DF_DEVICE_IS_NS16550	0x0002	/* it's an NS16550 */
X#define DF_DEVICE_IS_I82510	0x0004	/* it's an I82510 */
X#define DF_DEVICE_OPEN		0x0008	/* physical device is open */
X#define DF_DEVICE_LOCKED	0x0010	/* physical device locked */
X#define DF_MODEM_ENABLED	0x0020	/* modem enabled */
X#define DF_XMIT_BUSY		0x0040	/* transmitter busy */
X#define DF_XMIT_BREAK		0x0080	/* transmitter sends break */
X#define DF_XMIT_LOCKED		0x0100	/* transmitter locked against output */
X#define DF_DO_HANGUP		0x0200	/* delayed hangup request */
X#define DF_DO_BREAK		0x0400	/* delayed break request */
X#define DF_GUARD_TIMEOUT	0x0800	/* protect last char from corruption */
X
X/* define the flow control status flags */
X
X#define FF_HWO_HANDSHAKE	0x0001	/* output hw handshake enabled */
X#define FF_HWI_HANDSHAKE	0x0002	/* input hw handshake enabled */
X#define	FF_HWO_STOPPED		0x0004	/* output stopped by hw handshake */
X#define FF_HWI_STOPPED		0x0008	/* input stopped by hw handshake */
X#define FF_SWO_STOPPED		0x0010	/* output stopped by sw flow control */
X#define FF_SWI_STOPPED		0x0020	/* input stopped by sw flow control */
X#define FF_SW_FC_REQ		0x0040	/* sw input flow control request */
X#define FF_RXFER_STOPPED	0x0080	/* rxfer function stopped */
X
X/* define the scheduled events flags */
X
X#define EF_EVENT_SCHEDULED	0x0001	/* event function scheduled */
X#define EF_DO_RXFER		0x0002	/* rxfer function request */
X#define EF_DO_XXFER		0x0004	/* xxfer function request */
X#define EF_DO_BRKINT		0x0008	/* break int request */
X#define EF_DO_MPROC		0x0010	/* mproc function request */
X#define EF_SIGNAL_VPIX		0x0020	/* send pseudorupt to VP/ix */
X
X#define EF_EVENT_MASK		(EF_DO_RXFER | EF_DO_XXFER | EF_DO_BRKINT \
X				| EF_DO_MPROC | EF_SIGNAL_VPIX)
X
X/* define an easy way to refenence the absolute port addresses */
X
X#define RCV_DATA_PORT		(fip->uart_port_0)
X#define XMT_DATA_PORT		(fip->uart_port_0)
X#define INT_ENABLE_PORT		(fip->uart_port_1)
X#define INT_ID_PORT		(fip->uart_port_2)
X#define NS_FIFO_CTL_PORT	(fip->uart_port_2)
X#define I_BANK_PORT		(fip->uart_port_2)
X#define LINE_CTL_PORT		(fip->uart_port_3)
X#define MDM_CTL_PORT		(fip->uart_port_4)
X#define I_IDM_PORT		(fip->uart_port_4)
X#define LINE_STATUS_PORT	(fip->uart_port_5)
X#define I_RCM_PORT		(fip->uart_port_5)
X#define MDM_STATUS_PORT		(fip->uart_port_6)
X#define I_TCM_PORT		(fip->uart_port_6)
X#define DIVISOR_LSB_PORT	(fip->uart_port_0)
X#define DIVISOR_MSB_PORT	(fip->uart_port_1)
X#define INT_ACK_PORT		(fip->int_ack_port)
X
X/* modem control port */
X
X#define MC_SET_DTR		0x01
X#define MC_SET_RTS		0x02
X#define MC_SET_OUT1		0x04
X#define MC_SET_OUT2		0x08	/* tristates int line when false */
X#define MC_SET_LOOPBACK		0x10
X
X/* modem status port */
X
X#define MS_CTS_DELTA		0x01
X#define MS_DSR_DELTA		0x02
X#define MS_RING_TEDGE		0x04
X#define MS_DCD_DELTA		0x08
X#define MS_CTS_PRESENT		0x10
X#define MS_DSR_PRESENT		0x20
X#define MS_RING_PRESENT		0x40
X#define MS_DCD_PRESENT		0x80
X
X#define MS_ANY_DELTA	(MS_CTS_DELTA | MS_DSR_DELTA | MS_RING_TEDGE \
X				| MS_DCD_DELTA)
X#define MS_ANY_PRESENT	(MS_CTS_PRESENT | MS_DSR_PRESENT | MS_RING_PRESENT \
X				| MS_DCD_PRESENT)
X
X/* interrupt enable port */
X
X#define IE_NONE				0x00
X#define	IE_RECV_DATA_AVAILABLE		0x01
X#define	IE_XMIT_HOLDING_BUFFER_EMPTY	0x02
X#define IE_LINE_STATUS			0x04
X#define IE_MODEM_STATUS			0x08
X
X#define IE_INIT_MODE	(IE_RECV_DATA_AVAILABLE | IE_XMIT_HOLDING_BUFFER_EMPTY \
X			| IE_LINE_STATUS | IE_MODEM_STATUS)
X
X/* interrupt id port */
X
X#define II_NO_INTS_PENDING	0x01
X#define II_CODE_MASK		0x07
X#define II_MODEM_STATE		0x00
X#define II_XMTD_CHAR		0x02
X#define II_RCVD_CHAR		0x04
X#define II_RCV_ERROR		0x06
X#define II_NS_FIFO_TIMEOUT	0x08
X#define II_NS_FIFO_ENABLED	0xC0
X
X/* line control port */
X
X#define	LC_WORDLEN_MASK		0x03
X#define	LC_WORDLEN_5		0x00
X#define	LC_WORDLEN_6		0x01
X#define	LC_WORDLEN_7		0x02
X#define	LC_WORDLEN_8		0x03
X#define LC_STOPBITS_LONG	0x04
X#define LC_ENABLE_PARITY	0x08
X#define LC_EVEN_PARITY		0x10
X#define LC_STICK_PARITY		0x20
X#define LC_SET_BREAK_LEVEL	0x40
X#define LC_ENABLE_DIVISOR	0x80
X
X/* line status port */
X
X#define LS_RCV_AVAIL		0x01
X#define LS_OVERRUN		0x02
X#define LS_PARITY_ERROR		0x04
X#define LS_FRAMING_ERROR	0x08
X#define LS_BREAK_DETECTED	0x10
X#define LS_XMIT_AVAIL		0x20
X#define LS_XMIT_COMPLETE	0x40
X#define LS_ERROR_IN_NS_FIFO	0x80	/* NS16550 only */
X 
X#define LS_RCV_INT	(LS_RCV_AVAIL | LS_OVERRUN | LS_PARITY_ERROR \
X			| LS_FRAMING_ERROR | LS_BREAK_DETECTED)
X
X/* fifo control port (NS16550 only) */
X
X#define	NS_FIFO_ENABLE		0x01
X#define	NS_FIFO_CLR_RECV	0x02
X#define	NS_FIFO_CLR_XMIT	0x04
X#define	NS_FIFO_START_DMA	0x08
X#define NS_FIFO_SIZE_1		0x00
X#define NS_FIFO_SIZE_4		0x40
X#define NS_FIFO_SIZE_8		0x80
X#define NS_FIFO_SIZE_14		0xC0
X#define NS_FIFO_SIZE_MASK	0xC0
X
X#define STANDARD_NS_FIFO_CLEAR	0
X#define STANDARD_NS_FIFO_SETUP	(NS_FIFO_SIZE_4 | NS_FIFO_ENABLE)
X#define STANDARD_NS_FIFO_INIT	(STANDARD_NS_FIFO_SETUP | NS_FIFO_CLR_RECV \
X				| NS_FIFO_CLR_XMIT)
X
X#define INPUT_NS_FIFO_SIZE	16
X#define OUTPUT_NS_FIFO_SIZE	16
X
X/* fifo control ports (i82510 only) */
X
X#define I_BANK_0		0x00
X#define I_BANK_1		0x20
X#define I_BANK_2		0x40
X#define I_BANK_3		0x60
X#define I_FIFO_ENABLE		0x08
X#define I_FIFO_CLR_RECV		0x30
X#define I_FIFO_CLR_XMIT		0x0c
X
X#define STANDARD_I_FIFO_CLEAR	0
X#define STANDARD_I_FIFO_SETUP	I_FIFO_ENABLE
X
X#define INPUT_I_FIFO_SIZE	4
X#define OUTPUT_I_FIFO_SIZE	4
X
X/* defines for ioctl calls (VP/ix) */
X
X#define AIOC			('A'<<8)
X#define AIOCINTTYPE		(AIOC|60)	/* set interrupt type */
X#define AIOCDOSMODE		(AIOC|61)	/* set DOS mode */
X#define AIOCNONDOSMODE		(AIOC|62)	/* reset DOS mode */
X#define AIOCSERIALOUT		(AIOC|63)	/* serial device data write */
X#define AIOCSERIALIN		(AIOC|64)	/* serial device data read */
X#define AIOCSETSS		(AIOC|65)	/* set start/stop chars */
X#define AIOCINFO		(AIOC|66)	/* tell us what device we are */
X
X/* ioctl alternate names used by VP/ix */
X
X#define VPC_SERIAL_DOS		AIOCDOSMODE
X#define VPC_SERIAL_NONDOS	AIOCNONDOSMODE
X#define VPC_SERIAL_INFO		AIOCINFO
X#define VPC_SERIAL_OUT		AIOCSERIALOUT
X#define VPC_SERIAL_IN		AIOCSERIALIN
X
X/* serial in/out requests */
X
X#define SO_DIVLLSB		1
X#define SO_DIVLMSB		2
X#define SO_LCR			3
X#define SO_MCR			4
X#define SI_MSR			1
X#define SIO_MASK(x)		(1<<((x)-1))
X
X
X/* This structure contains everything one would like to know about
X   an open device.  There is one of it for each physical unit.
X
X   We use several unions to eliminate most integer type conversions
X   at run-time. The standard UNIX V 3.X/386 C compiler forces all
X   operands in expressions and all function parameters to type int.
X   To save some time, with the means of unions we deliver type int
X   at the proper locations while dealing with the original type
X   wherever int would be slower.
X
X   This is highly compiler implementation specific. But for the sake
X   of speed the end justifies the means.
X
X   Take care that the size of the area that contains the various
X   structure fields (up to, but excluding the ring buffers)
X   is <= 128 bytes. Otherwise a 4-byte offset is used to access
X   some of the structure fields. For the first 128 bytes a 1-byte
X   offset is used, which is faster.
X*/
X
Xstruct	fas_info
X{
X	struct	tty	*tty;	/* the tty structure */
X	struct	fas_info *prev_int_user;/* link to previous fas_info struct */
X	struct	fas_info *next_int_user;/* link to next fas_info struct */
X	int	timeout_idx;	/* timeout index for untimeout () */
X	uint	iflag;		/* current terminal input flags */
X	uint	cflag;		/* current terminal hardware control flags */
X	union {			/* flags about the device state */
X		ushort	s;
X		uint	i;
X	} device_flags;
X	union {			/* flags about the flow control state */
X		ushort	s;
X		uint	i;
X	} flow_flags;
X	union {			/* flags about the scheduled events */
X		ushort	s;
X		uint	i;
X	} event_flags;
X	uint	o_state;	/* current open state */
X	uint	po_state;	/* previous open state */
X	union {			/* modem control masks */
X		struct {
X			unchar	en;	/* mask for modem enable */
X			unchar	ca;	/* mask for carrier detect */
X			unchar	ub;	/* mask for unblock signal */
X		} m;
X		uint	i;
X	} modem;
X	union {			/* hardware flow control masks */
X		struct {
X			unchar	ic;	/* control mask for inp. flow ctrl */
X			unchar	oc;	/* control mask for outp. flow ctrl */
X			unchar	oe;	/* enable mask for outp. flow ctrl */
X		} m;
X		uint	i;
X	} flow;
X	unchar	msr;		/* modem status register value */
X	unchar	new_msr;	/* new modem status register value */
X	unchar	mcr;		/* modem control register value */
X	unchar	lcr;		/* line control register value */
X	unchar	ier;		/* interrupt enable register value */
X	unchar	int_ack;	/* int ack value */
X	unchar	vec;		/* interrupt vector for this struct */
X#if defined (HAVE_VPIX)
X	unchar	v86_intmask;	/* VP/ix pseudorupt mask */
X	v86_t	*v86_proc;	/* VP/ix v86proc pointer for pseudorupts */
X	struct termss	v86_ss;	/* VP/ix start/stop characters */
X#endif
X	uint	uart_port_0;	/* uart port 0 address */
X	uint	uart_port_1;	/* uart port 1 address */
X	uint	uart_port_2;	/* uart port 2 address */
X	uint	uart_port_3;	/* uart port 3 address */
X	uint	uart_port_4;	/* uart port 4 address */
X	uint	uart_port_5;	/* uart port 5 address */
X	uint	uart_port_6;	/* uart port 6 address */
X	uint	int_ack_port;	/* int ack port address */
X	uint	recv_ring_cnt;	/* receiver ring buffer counter */
X	unchar	*recv_ring_put_ptr;	/* recv ring buf put ptr */
X	unchar	*recv_ring_take_ptr;	/* recv ring buf take ptr */
X	uint	xmit_ring_size;	/* transmitter ring buffer size */
X	uint	xmit_ring_cnt;	/* transmitter ring buffer counter */
X	unchar	*xmit_ring_put_ptr;	/* xmit ring buf put ptr */
X	unchar	*xmit_ring_take_ptr;	/* xmit ring buf take ptr */
X	unchar	recv_buffer [RECV_BUFF_SIZE];	/* recv ring buf */
X	unchar	xmit_buffer [XMIT_BUFF_SIZE];	/* xmit ring buf */
X};
SHAR_EOF
true || echo 'restore of fas.h failed'
rm -f _shar_wnt_.tmp
fi
# ============= i_fas-ast4 ==============
if test -f 'i_fas-ast4' -a X"$1" != X"-c"; then
	echo 'x - skipping i_fas-ast4 (File already exists)'
	rm -f _shar_wnt_.tmp
else
> _shar_wnt_.tmp
echo 'x - extracting i_fas-ast4 (Text)'
sed 's/^X//' << 'SHAR_EOF' > 'i_fas-ast4' &&
XF0:2345:off:/etc/getty ttyFM00 9600
XF1:2345:off:/etc/getty ttyFM01 9600
XF2:2345:off:/etc/getty ttyFM02 9600
XF3:2345:off:/etc/getty ttyFM03 9600
SHAR_EOF
true || echo 'restore of i_fas-ast4 failed'
rm -f _shar_wnt_.tmp
fi
# ============= i_fas-c1-2 ==============
if test -f 'i_fas-c1-2' -a X"$1" != X"-c"; then
	echo 'x - skipping i_fas-c1-2 (File already exists)'
	rm -f _shar_wnt_.tmp
else
> _shar_wnt_.tmp
echo 'x - extracting i_fas-c1-2 (Text)'
sed 's/^X//' << 'SHAR_EOF' > 'i_fas-c1-2' &&
XF0:2345:off:/etc/getty ttyFM00 9600
XF1:2345:off:/etc/getty ttyFM01 9600
SHAR_EOF
true || echo 'restore of i_fas-c1-2 failed'
rm -f _shar_wnt_.tmp
fi
# ============= i_fas-c1-3 ==============
if test -f 'i_fas-c1-3' -a X"$1" != X"-c"; then
	echo 'x - skipping i_fas-c1-3 (File already exists)'
	rm -f _shar_wnt_.tmp
else
> _shar_wnt_.tmp
echo 'x - extracting i_fas-c1-3 (Text)'
sed 's/^X//' << 'SHAR_EOF' > 'i_fas-c1-3' &&
XF0:2345:off:/etc/getty ttyFM00 9600
XF1:2345:off:/etc/getty ttyFM01 9600
XF2:2345:off:/etc/getty ttyFM02 9600
SHAR_EOF
true || echo 'restore of i_fas-c1-3 failed'
rm -f _shar_wnt_.tmp
fi
# ============= makefile.ESIX ==============
if test -f 'makefile.ESIX' -a X"$1" != X"-c"; then
	echo 'x - skipping makefile.ESIX (File already exists)'
	rm -f _shar_wnt_.tmp
else
> _shar_wnt_.tmp
echo 'x - extracting makefile.ESIX (Text)'
sed 's/^X//' << 'SHAR_EOF' > 'makefile.ESIX' &&
X# Makefile for ESIX
X
XSHELL=/bin/sh
XINCLSYS=/usr/include/sys
XLKDRVRDIR=/etc/conf/pack.d/fas
XLKSCONFDIR=/etc/conf/sdevice.d
XLKNCONFDIR=/etc/conf/node.d
XLKICONFDIR=/etc/conf/init.d
XDRVRNAME=Driver.o
XCONFNAME=fas
X
XCC = cc
XCFLAGS = -O -DINKERNEL
X
XOBJS = fas.o
X
Xfas.o:		fas.c $(INCLSYS)/fas.h
X
Xinstall:	fas.o space.c s_$(CONFNAME) n_$(CONFNAME) i_$(CONFNAME)
X	-mkdir $(LKDRVRDIR) 2> /dev/null
X	chmod 755 $(LKDRVRDIR)
X	cp fas.o $(LKDRVRDIR)/$(DRVRNAME)
X	chmod 644 $(LKDRVRDIR)/$(DRVRNAME)
X	cp space.c $(LKDRVRDIR)/space.c
X	chmod 644 $(LKDRVRDIR)/space.c
X	cp s_$(CONFNAME) $(LKSCONFDIR)/$(CONFNAME)
X	chmod 644 $(LKSCONFDIR)/$(CONFNAME)
X	cp n_$(CONFNAME) $(LKNCONFDIR)/$(CONFNAME)
X	chmod 644 $(LKNCONFDIR)/$(CONFNAME)
X	cp i_$(CONFNAME) $(LKICONFDIR)/$(CONFNAME)
X	chmod 644 $(LKICONFDIR)/$(CONFNAME)
X
Xspace.c:
X	@echo "You must copy the proper space-xxxxx file to \`space.c'"
X	@false
X	
Xs_$(CONFNAME):
X	@echo "You must copy the proper s_$(CONFNAME)-xxxxx file to \`s_$(CONFNAME)'"
X	@false
X		
Xn_$(CONFNAME):
X	@echo "You must copy the proper n_$(CONFNAME)-xxxxx file to \`n_$(CONFNAME)'"
X	@false
X		
Xi_$(CONFNAME):
X	@echo "You must copy the proper i_$(CONFNAME)-xxxxx file to \`i_$(CONFNAME)'"
X	@false
X		
X$(INCLSYS)/fas.h:	fas.h
X	cp fas.h $(INCLSYS)/fas.h
X
Xclean:
X	rm -f fas.o
X
Xclobber:	clean
X
SHAR_EOF
true || echo 'restore of makefile.ESIX failed'
rm -f _shar_wnt_.tmp
fi
# ============= makefile.ISC ==============
if test -f 'makefile.ISC' -a X"$1" != X"-c"; then
	echo 'x - skipping makefile.ISC (File already exists)'
	rm -f _shar_wnt_.tmp
else
> _shar_wnt_.tmp
echo 'x - extracting makefile.ISC (Text)'
sed 's/^X//' << 'SHAR_EOF' > 'makefile.ISC' &&
X# Makefile for ISC SYS V/386
X
XSHELL=/bin/sh
XINCLSYS=/usr/include/sys
XLKDRVRDIR=/etc/conf/pack.d/fas
XLKSCONFDIR=/etc/conf/sdevice.d
XLKNCONFDIR=/etc/conf/node.d
XLKICONFDIR=/etc/conf/init.d
XDRVRNAME=Driver.o
XCONFNAME=fas
X
XCC = cc
XCFLAGS = -O -DINKERNEL
X
XOBJS = fas.o
X
Xfas.o:		fas.c $(INCLSYS)/fas.h
X
Xinstall:	fas.o space.c s_$(CONFNAME) n_$(CONFNAME) i_$(CONFNAME)
X	-mkdir $(LKDRVRDIR) 2> /dev/null
X	chmod 755 $(LKDRVRDIR)
X	cp fas.o $(LKDRVRDIR)/$(DRVRNAME)
X	chmod 644 $(LKDRVRDIR)/$(DRVRNAME)
X	cp space.c $(LKDRVRDIR)/space.c
X	chmod 644 $(LKDRVRDIR)/space.c
X	cp s_$(CONFNAME) $(LKSCONFDIR)/$(CONFNAME)
X	chmod 644 $(LKSCONFDIR)/$(CONFNAME)
X	cp n_$(CONFNAME) $(LKNCONFDIR)/$(CONFNAME)
X	chmod 644 $(LKNCONFDIR)/$(CONFNAME)
X	cp i_$(CONFNAME) $(LKICONFDIR)/$(CONFNAME)
X	chmod 644 $(LKICONFDIR)/$(CONFNAME)
X
Xspace.c:
X	@echo "You must copy the proper space-xxxxx file to \`space.c'"
X	@false
X	
Xs_$(CONFNAME):
X	@echo "You must copy the proper s_$(CONFNAME)-xxxxx file to \`s_$(CONFNAME)'"
X	@false
X		
Xn_$(CONFNAME):
X	@echo "You must copy the proper n_$(CONFNAME)-xxxxx file to \`n_$(CONFNAME)'"
X	@false
X		
Xi_$(CONFNAME):
X	@echo "You must copy the proper i_$(CONFNAME)-xxxxx file to \`i_$(CONFNAME)'"
X	@false
X		
X$(INCLSYS)/fas.h:	fas.h
X	cp fas.h $(INCLSYS)/fas.h
X
Xclean:
X	rm -f fas.o
X
Xclobber:	clean
X
SHAR_EOF
true || echo 'restore of makefile.ISC failed'
rm -f _shar_wnt_.tmp
fi
# ============= makefile.SCO ==============
if test -f 'makefile.SCO' -a X"$1" != X"-c"; then
	echo 'x - skipping makefile.SCO (File already exists)'
	rm -f _shar_wnt_.tmp
else
> _shar_wnt_.tmp
echo 'x - extracting makefile.SCO (Text)'
sed 's/^X//' << 'SHAR_EOF' > 'makefile.SCO' &&
X# Makefile for SCO UNIX SYS V/386
X
XSHELL=/bin/sh
XINCLSYS=/usr/include/sys
XLKDRVRDIR=/etc/conf/pack.d/fas
XLKSCONFDIR=/etc/conf/sdevice.d
XLKNCONFDIR=/etc/conf/node.d
XLKICONFDIR=/etc/conf/init.d
XDRVRNAME=Driver.o
XCONFNAME=fas
X
XCC = rcc
XCFLAGS = -O -DINKERNEL -DSCO
X
XOBJS = fas.o
X
Xfas.o:		fas.c $(INCLSYS)/fas.h
X
Xinstall:	fas.o space.c s_$(CONFNAME) n_$(CONFNAME) i_$(CONFNAME)
X	-mkdir $(LKDRVRDIR) 2> /dev/null
X	chmod 755 $(LKDRVRDIR)
X	cp fas.o $(LKDRVRDIR)/$(DRVRNAME)
X	chmod 644 $(LKDRVRDIR)/$(DRVRNAME)
X	cp space.c $(LKDRVRDIR)/space.c
X	chmod 644 $(LKDRVRDIR)/space.c
X	cp s_$(CONFNAME) $(LKSCONFDIR)/$(CONFNAME)
X	chmod 644 $(LKSCONFDIR)/$(CONFNAME)
X	cp n_$(CONFNAME) $(LKNCONFDIR)/$(CONFNAME)
X	chmod 644 $(LKNCONFDIR)/$(CONFNAME)
X	cp i_$(CONFNAME) $(LKICONFDIR)/$(CONFNAME)
X	chmod 644 $(LKICONFDIR)/$(CONFNAME)
X
Xspace.c:
X	@echo "You must copy the proper space-xxxxx file to \`space.c'"
X	@false
X	
Xs_$(CONFNAME):
X	@echo "You must copy the proper s_$(CONFNAME)-xxxxx file to \`s_$(CONFNAME)'"
X	@false
X		
Xn_$(CONFNAME):
X	@echo "You must copy the proper n_$(CONFNAME)-xxxxx file to \`n_$(CONFNAME)'"
X	@false
X		
Xi_$(CONFNAME):
X	@echo "You must copy the proper i_$(CONFNAME)-xxxxx file to \`i_$(CONFNAME)'"
X	@false
X		
X$(INCLSYS)/fas.h:	fas.h
X	cp fas.h $(INCLSYS)/fas.h
X
Xclean:
X	rm -f fas.o
X
Xclobber:	clean
X
SHAR_EOF
true || echo 'restore of makefile.SCO failed'
rm -f _shar_wnt_.tmp
fi
# ============= makefile.XENIX ==============
if test -f 'makefile.XENIX' -a X"$1" != X"-c"; then
	echo 'x - skipping makefile.XENIX (File already exists)'
	rm -f _shar_wnt_.tmp
else
> _shar_wnt_.tmp
echo 'x - extracting makefile.XENIX (Text)'
sed 's/^X//' << 'SHAR_EOF' > 'makefile.XENIX' &&
X# Makefile for SCO Xenix 386
X
XSHELL=/bin/sh
X
XCC = cc
XCFLAGS = -O -DXENIX -DM_KERNEL -M3e -Zp4 -c
X
Xfas:	fas.c fas.h space.c
X	$(CC) $(CFLAGS) fas.c space.c
X
Xspace.c:
X	@echo "You must copy the proper space-xxxxx file to \`space.c'"
X	@false
X
Xclean:
X	rm -f fas.o space.o
X
Xclobber:	clean
X
SHAR_EOF
true || echo 'restore of makefile.XENIX failed'
rm -f _shar_wnt_.tmp
fi
# ============= makefile.uPort ==============
if test -f 'makefile.uPort' -a X"$1" != X"-c"; then
	echo 'x - skipping makefile.uPort (File already exists)'
	rm -f _shar_wnt_.tmp
else
> _shar_wnt_.tmp
echo 'x - extracting makefile.uPort (Text)'
sed 's/^X//' << 'SHAR_EOF' > 'makefile.uPort' &&
X# Makefile for uPort SYS V/386
X
XSHELL=/bin/sh
XINCLSYS=/usr/include/sys
XLKDRVRDIR=/etc/atconf/modules/fas
XLKCONFDIR=/etc/atconf/modules/fas
XDRVRNAME=fas.o
XCONFNAME=config
X
XCC = cc
XCFLAGS = -O -DINKERNEL -DOPTIM
X
XOBJS = fas.o
X
Xfas.o:		fas.c $(INCLSYS)/fas.h
X
Xinstall:	fas.o space.c $(CONFNAME)
X	-mkdir $(LKDRVRDIR) 2> /dev/null
X	chmod 755 $(LKDRVRDIR)
X	cp fas.o $(LKDRVRDIR)/$(DRVRNAME)
X	chmod 644 $(LKDRVRDIR)/$(DRVRNAME)
X	cp space.c $(LKDRVRDIR)/space.c
X	chmod 644 $(LKDRVRDIR)/space.c
X	cp $(CONFNAME) $(LKCONFDIR)/$(CONFNAME)
X	chmod 644 $(LKCONFDIR)/$(CONFNAME)
X
Xspace.c:
X	@echo "You must copy the proper space-xxxxx file to \`space.c'"
X	@false
X	
X$(CONFNAME):
X	@echo "You must copy the proper $(CONFNAME)-xxxxx file to \`$(CONFNAME)'"
X	@false
X		
X$(INCLSYS)/fas.h:	fas.h
X	cp fas.h $(INCLSYS)/fas.h
X
Xclean:
X	rm -f fas.o
X
Xclobber:	clean
X
SHAR_EOF
true || echo 'restore of makefile.uPort failed'
rm -f _shar_wnt_.tmp
fi
# ============= n_fas-ast4 ==============
if test -f 'n_fas-ast4' -a X"$1" != X"-c"; then
	echo 'x - skipping n_fas-ast4 (File already exists)'
	rm -f _shar_wnt_.tmp
else
> _shar_wnt_.tmp
echo 'x - extracting n_fas-ast4 (Text)'
sed 's/^X//' << 'SHAR_EOF' > 'n_fas-ast4' &&
Xfas	ttyF00	c	48
Xfas	ttyF01	c	49
Xfas	ttyF02	c	50
Xfas	ttyF03	c	51
Xfas	ttyFM00	c	208
Xfas	ttyFM01	c	209
Xfas	ttyFM02	c	210
Xfas	ttyFM03	c	211
SHAR_EOF
true || echo 'restore of n_fas-ast4 failed'
rm -f _shar_wnt_.tmp
fi
# ============= n_fas-c1-2 ==============
if test -f 'n_fas-c1-2' -a X"$1" != X"-c"; then
	echo 'x - skipping n_fas-c1-2 (File already exists)'
	rm -f _shar_wnt_.tmp
else
> _shar_wnt_.tmp
echo 'x - extracting n_fas-c1-2 (Text)'
sed 's/^X//' << 'SHAR_EOF' > 'n_fas-c1-2' &&
Xfas	ttyF00	c	48
Xfas	ttyF01	c	49
Xfas	ttyFM00	c	208
Xfas	ttyFM01	c	209
SHAR_EOF
true || echo 'restore of n_fas-c1-2 failed'
rm -f _shar_wnt_.tmp
fi
# ============= n_fas-c1-3 ==============
if test -f 'n_fas-c1-3' -a X"$1" != X"-c"; then
	echo 'x - skipping n_fas-c1-3 (File already exists)'
	rm -f _shar_wnt_.tmp
else
> _shar_wnt_.tmp
echo 'x - extracting n_fas-c1-3 (Text)'
sed 's/^X//' << 'SHAR_EOF' > 'n_fas-c1-3' &&
Xfas	ttyF00	c	48
Xfas	ttyF01	c	49
Xfas	ttyF02	c	50
Xfas	ttyFM00	c	208
Xfas	ttyFM01	c	209
Xfas	ttyFM02	c	210
SHAR_EOF
true || echo 'restore of n_fas-c1-3 failed'
rm -f _shar_wnt_.tmp
fi
# ============= s_fas-ast4 ==============
if test -f 's_fas-ast4' -a X"$1" != X"-c"; then
	echo 'x - skipping s_fas-ast4 (File already exists)'
	rm -f _shar_wnt_.tmp
else
> _shar_wnt_.tmp
echo 'x - extracting s_fas-ast4 (Text)'
sed 's/^X//' << 'SHAR_EOF' > 's_fas-ast4' &&
Xfas	Y	4	7	1	4	2a0	2bf	0	0
SHAR_EOF
true || echo 'restore of s_fas-ast4 failed'
rm -f _shar_wnt_.tmp
fi
# ============= s_fas-c1-2 ==============
if test -f 's_fas-c1-2' -a X"$1" != X"-c"; then
	echo 'x - skipping s_fas-c1-2 (File already exists)'
	rm -f _shar_wnt_.tmp
else
> _shar_wnt_.tmp
echo 'x - extracting s_fas-c1-2 (Text)'
sed 's/^X//' << 'SHAR_EOF' > 's_fas-c1-2' &&
Xfas	Y	1	7	1	4	3f8	3ff	0	0
Xfas	Y	1	7	1	3	2f8	2ff	0	0
SHAR_EOF
true || echo 'restore of s_fas-c1-2 failed'
rm -f _shar_wnt_.tmp
fi
# ============= s_fas-c1-3 ==============
if test -f 's_fas-c1-3' -a X"$1" != X"-c"; then
	echo 'x - skipping s_fas-c1-3 (File already exists)'
	rm -f _shar_wnt_.tmp
else
> _shar_wnt_.tmp
echo 'x - extracting s_fas-c1-3 (Text)'
sed 's/^X//' << 'SHAR_EOF' > 's_fas-c1-3' &&
Xfas	Y	1	7	1	4	3f8	3ff	0	0
Xfas	Y	1	7	1	3	2f8	2ff	0	0
Xfas	Y	1	7	1	9	3e8	3ef	0	0
SHAR_EOF
true || echo 'restore of s_fas-c1-3 failed'
rm -f _shar_wnt_.tmp
fi
# ============= space-ast4 ==============
if test -f 'space-ast4' -a X"$1" != X"-c"; then
	echo 'x - skipping space-ast4 (File already exists)'
	rm -f _shar_wnt_.tmp
else
> _shar_wnt_.tmp
echo 'x - extracting space-ast4 (Text)'
sed 's/^X//' << 'SHAR_EOF' > 'space-ast4' &&
X/* Async device configuration file for the FAS async driver. */
X
X/* This version is for the AST 4-port card in expanded mode.
X*/
X 
X/* Originally written by
XJim Murray              encore!cloud9!jjmhome!jjm
X2 Mohawk Circle         harvard!m2c!jjmhome!jjm
XWestboro Mass 01581     jjm%jjmhome at m2c.m2c.org
XUSA                     voice (508) 366-2813
X*/
X
X/* Current author:
XUwe Doering             Domain   : gemini at geminix.in-berlin.de
XBillstedter Pfad 17 b   Bangpath : ...!unido!fub!tmpmbx!geminix!gemini
X1000 Berlin 20
XGermany
X*/
X
X#ident	"@(#)space.c	2.07"
X
X#if defined (XENIX)
X#include "fas.h"
X#else
X#include <sys/fas.h>
X#endif
X
X/* This is the number of devices to be handled by this driver.
X   You may define up to 16 devices.  If this number is changed
X   the arrays below must be filled in accordingly.
X*/
X#define NUM_PHYSICAL_UNITS	4
X
X#if NUM_PHYSICAL_UNITS > MAX_UNITS
X#undef NUM_PHYSICAL_UNITS
X#define NUM_PHYSICAL_UNITS	MAX_UNITS
X#endif
X
X/* let the driver know the number of devices */
Xuint	fas_physical_units = NUM_PHYSICAL_UNITS;
X
X/* array of base port addresses */
Xuint	fas_port [NUM_PHYSICAL_UNITS] =
X{
X	0x2a0,	0x2a8,	0x2b0,	0x2b8
X};
X
X/* array of interrupt vectors */
Xuint	fas_vec [NUM_PHYSICAL_UNITS] =
X{
X	0x4,	0x4,	0x4,	0x4
X};
X
X/* initialization sequence for serial card
X   This array contains pairs of values of the form:
X
X        portaddress, value,
X              :
X              :
X        portaddress, value,
X        0
X
X   For every line `value' will be written to `portaddress'. If
X   `value' is replaced with the macro `READ_PORT' then a value
X   is read from `portaddress' instead. The value itself will be
X   discarded. Therefor this makes only sense if the read access
X   to the port has a side effect like setting or resetting
X   certain flags.
X
X   NOTE: This array *must* be terminated with a value of 0
X         in the portaddress column!
X*/
X
Xuint	fas_init_seq [] =
X{
X	0x2bf,	0x80,
X	0
X};
X
X/* initial modem control port info
X   This value is ored into the modem control value for each UART.  This is
X   normaly used to force out2 which is used to enable the interrupts of
X   the standard com1 and com2 ports.  Several brands of cards have modes
X   that allow them to work in compatible mode like com1 and com2 or as a
X   mux.  One of these cards is the AST 4-port card.  When this card is
X   used with the common interrupt out2 must not be set or there will be
X   a fight on the bus.
X
X   Note: This is one of the major trouble-spots with mux cards. Check
X         your manual.
X*/
X
Xuint	fas_mcb [NUM_PHYSICAL_UNITS] =
X{
X	0,	0,	0,	0
X};
X
X/* array of modem control flags
X   You can choose which signals to use for modem control. See fas.h
X   for possible names and values. Whether or not modem control is
X   used is determined by the minor device number at open time.
X*/
Xuint	fas_modem [NUM_PHYSICAL_UNITS] =
X{
X	EN_DTR | CA_DCD | UB_RING,
X	EN_DTR | CA_DCD | UB_RING,
X	EN_DTR | CA_DCD | UB_RING,
X	EN_DTR | CA_DCD | UB_RING
X};
X
X/* array of hardware flow control flags
X   You can choose which signals to use for hardware handshake. See fas.h
X   for possible names and values. Whether or not hardware handshake is
X   used is determined by the minor device number at open time or by the
X   RTSFLOW/CTSFLOW termio(7) flags.
X*/
Xuint	fas_flow [NUM_PHYSICAL_UNITS] =
X{
X	HI_RTS | HO_CTS_ON_DSR,
X	HI_RTS | HO_CTS_ON_DSR,
X	HI_RTS | HO_CTS_ON_DSR,
X	HI_RTS | HO_CTS_ON_DSR
X};
X
X/* additional configurations for multiplexed interrupt boards
X   If you have a mux board, you may have to acknowledge interrupts
X   by writing to a special register. There may be a separate register
X   for every single port or for every interrupt vector or both.
X   The following arrays contain the special register addresses and
X   the corresponding values that are written to them in response
X   to an interrupt.
X*/
X
X/* array of int ack register addresses
X   These registers are written to every time after all interrupt
X   sources in the corresponding UART have been cleared.
X   Enter the addresses on a per unit base. An address of zero
X   disables this feature.
X*/
X
Xuint	fas_int_ack_port [NUM_PHYSICAL_UNITS] =
X{
X	0,	0,	0,	0
X};
X
X/* array of int ack values
X   These values are written to the corresponding int ack register
X   in response to an interrupt.
X*/
X
Xuint	fas_int_ack [NUM_PHYSICAL_UNITS] =
X{
X	0,	0,	0,	0
X};
X
X/* array of int ack mux register addresses
X   These registers are written to every time after all interrupt
X   sources in all of the UARTs that are tied to the corresponding
X   interrupt vector have been cleared.
X   Enter the addresses on a per vector base. An address of zero
X   disables this feature.
X*/
X
Xuint	fas_mux_ack_port [NUM_INT_VECTORS] =
X{
X	0,	0,	0,	0,
X	0,	0,	0,	0,
X	0,	0,	0,	0,
X	0,	0,	0,	0
X};
X
X/* array of int ack mux values
X   These values are written to the corresponding int ack mux register
X   in response to an interrupt.
X*/
X
Xuint	fas_mux_ack [NUM_INT_VECTORS] =
X{
X	0,	0,	0,	0,
X	0,	0,	0,	0,
X	0,	0,	0,	0,
X	0,	0,	0,	0
X};
X
X/* NOTHING NEEDS TO BE CHANGED BELOW THIS LINE.
X   ============================================
X*/
X
X/* array of structures to hold all info for a physical minor device */
Xstruct fas_info	fas_info [NUM_PHYSICAL_UNITS];
X
X/* array of ttys for logical minor devices */
Xstruct tty	fas_tty [NUM_PHYSICAL_UNITS * 2];
X
X/* array of pointers to fas_info structures
X   this prevents time consuming multiplications for index calculation
X*/
Xstruct fas_info	*fas_info_ptr [NUM_PHYSICAL_UNITS];
X
X/* array of pointers to fas_tty structures
X   this prevents time consuming multiplications for index calculation
X*/
Xstruct tty	*fas_tty_ptr [NUM_PHYSICAL_UNITS * 2];
SHAR_EOF
true || echo 'restore of space-ast4 failed'
rm -f _shar_wnt_.tmp
fi
# ============= space-c1-2 ==============
if test -f 'space-c1-2' -a X"$1" != X"-c"; then
	echo 'x - skipping space-c1-2 (File already exists)'
	rm -f _shar_wnt_.tmp
else
> _shar_wnt_.tmp
echo 'x - extracting space-c1-2 (Text)'
sed 's/^X//' << 'SHAR_EOF' > 'space-c1-2' &&
X/* Async device configuration file for the FAS async driver. */
X
X/* This version is for the standard COM1 and COM2 ports.
X*/
X 
X/* Originally written by
XJim Murray              encore!cloud9!jjmhome!jjm
X2 Mohawk Circle         harvard!m2c!jjmhome!jjm
XWestboro Mass 01581     jjm%jjmhome at m2c.m2c.org
XUSA                     voice (508) 366-2813
X*/
X
X/* Current author:
XUwe Doering             Domain   : gemini at geminix.in-berlin.de
XBillstedter Pfad 17 b   Bangpath : ...!unido!fub!tmpmbx!geminix!gemini
X1000 Berlin 20
XGermany
X*/
X
X#ident	"@(#)space.c	2.07"
X
X#if defined (XENIX)
X#include "fas.h"
X#else
X#include <sys/fas.h>
X#endif
X
X/* This is the number of devices to be handled by this driver.
X   You may define up to 16 devices.  If this number is changed
X   the arrays below must be filled in accordingly.
X*/
X#define NUM_PHYSICAL_UNITS	2
X
X#if NUM_PHYSICAL_UNITS > MAX_UNITS
X#undef NUM_PHYSICAL_UNITS
X#define NUM_PHYSICAL_UNITS	MAX_UNITS
X#endif
X
X/* let the driver know the number of devices */
Xuint	fas_physical_units = NUM_PHYSICAL_UNITS;
X
X/* array of base port addresses */
Xuint	fas_port [NUM_PHYSICAL_UNITS] =
X{
X	0x3f8,	0x2f8
X};
X
X/* array of interrupt vectors */
Xuint	fas_vec [NUM_PHYSICAL_UNITS] =
X{
X	0x4,	0x3
X};
X
X/* initialization sequence for serial card
X   This array contains pairs of values of the form:
X
X        portaddress, value,
X              :
X              :
X        portaddress, value,
X        0
X
X   For every line `value' will be written to `portaddress'. If
X   `value' is replaced with the macro `READ_PORT' then a value
X   is read from `portaddress' instead. The value itself will be
X   discarded. Therefor this makes only sense if the read access
X   to the port has a side effect like setting or resetting
X   certain flags.
X
X   NOTE: This array *must* be terminated with a value of 0
X         in the portaddress column!
X*/
X
Xuint	fas_init_seq [] =
X{
X	0
X};
X
X/* initial modem control port info
X   This value is ored into the modem control value for each UART.  This is
X   normaly used to force out2 which is used to enable the interrupts of
X   the standard com1 and com2 ports.  Several brands of cards have modes
X   that allow them to work in compatible mode like com1 and com2 or as a
X   mux.  One of these cards is the AST 4-port card.  When this card is
X   used with the common interrupt out2 must not be set or there will be
X   a fight on the bus.
X
X   Note: This is one of the major trouble-spots with mux cards. Check
X         your manual.
X*/
X
Xuint	fas_mcb [NUM_PHYSICAL_UNITS] =
X{
X	MC_SET_OUT2,	MC_SET_OUT2
X};
X
X/* array of modem control flags
X   You can choose which signals to use for modem control. See fas.h
X   for possible names and values. Whether or not modem control is
X   used is determined by the minor device number at open time.
X*/
Xuint	fas_modem [NUM_PHYSICAL_UNITS] =
X{
X	EN_DTR | CA_DCD | UB_RING,
X	EN_DTR | CA_DCD | UB_RING
X};
X
X/* array of hardware flow control flags
X   You can choose which signals to use for hardware handshake. See fas.h
X   for possible names and values. Whether or not hardware handshake is
X   used is determined by the minor device number at open time or by the
X   RTSFLOW/CTSFLOW termio(7) flags.
X*/
Xuint	fas_flow [NUM_PHYSICAL_UNITS] =
X{
X	HI_RTS | HO_CTS_ON_DSR,
X	HI_RTS | HO_CTS_ON_DSR
X};
X
X/* additional configurations for multiplexed interrupt boards
X   If you have a mux board, you may have to acknowledge interrupts
X   by writing to a special register. There may be a separate register
X   for every single port or for every interrupt vector or both.
X   The following arrays contain the special register addresses and
X   the corresponding values that are written to them in response
X   to an interrupt.
X*/
X
X/* array of int ack register addresses
X   These registers are written to every time after all interrupt
X   sources in the corresponding UART have been cleared.
X   Enter the addresses on a per unit base. An address of zero
X   disables this feature.
X*/
X
Xuint	fas_int_ack_port [NUM_PHYSICAL_UNITS] =
X{
X	0,	0
X};
X
X/* array of int ack values
X   These values are written to the corresponding int ack register
X   in response to an interrupt.
X*/
X
Xuint	fas_int_ack [NUM_PHYSICAL_UNITS] =
X{
X	0,	0
X};
X
X/* array of int ack mux register addresses
X   These registers are written to every time after all interrupt
X   sources in all of the UARTs that are tied to the corresponding
X   interrupt vector have been cleared.
X   Enter the addresses on a per vector base. An address of zero
X   disables this feature.
X*/
X
Xuint	fas_mux_ack_port [NUM_INT_VECTORS] =
X{
X	0,	0,	0,	0,
X	0,	0,	0,	0,
X	0,	0,	0,	0,
X	0,	0,	0,	0
X};
X
X/* array of int ack mux values
X   These values are written to the corresponding int ack mux register
X   in response to an interrupt.
X*/
X
Xuint	fas_mux_ack [NUM_INT_VECTORS] =
X{
X	0,	0,	0,	0,
X	0,	0,	0,	0,
X	0,	0,	0,	0,
X	0,	0,	0,	0
X};
X
X/* NOTHING NEEDS TO BE CHANGED BELOW THIS LINE.
X   ============================================
X*/
X
X/* array of structures to hold all info for a physical minor device */
Xstruct fas_info	fas_info [NUM_PHYSICAL_UNITS];
X
X/* array of ttys for logical minor devices */
Xstruct tty	fas_tty [NUM_PHYSICAL_UNITS * 2];
X
X/* array of pointers to fas_info structures
X   this prevents time consuming multiplications for index calculation
X*/
Xstruct fas_info	*fas_info_ptr [NUM_PHYSICAL_UNITS];
X
X/* array of pointers to fas_tty structures
X   this prevents time consuming multiplications for index calculation
X*/
Xstruct tty	*fas_tty_ptr [NUM_PHYSICAL_UNITS * 2];
SHAR_EOF
true || echo 'restore of space-c1-2 failed'
rm -f _shar_wnt_.tmp
fi
# ============= space-c1-3 ==============
if test -f 'space-c1-3' -a X"$1" != X"-c"; then
	echo 'x - skipping space-c1-3 (File already exists)'
	rm -f _shar_wnt_.tmp
else
> _shar_wnt_.tmp
echo 'x - extracting space-c1-3 (Text)'
sed 's/^X//' << 'SHAR_EOF' > 'space-c1-3' &&
X/* Async device configuration file for the FAS async driver. */
X
X/* This version is for the standard COM1 and COM2 and additional COM3
X   ports.
X*/
X 
X/* Originally written by
XJim Murray              encore!cloud9!jjmhome!jjm
X2 Mohawk Circle         harvard!m2c!jjmhome!jjm
XWestboro Mass 01581     jjm%jjmhome at m2c.m2c.org
XUSA                     voice (508) 366-2813
X*/
X
X/* Current author:
XUwe Doering             Domain   : gemini at geminix.in-berlin.de
XBillstedter Pfad 17 b   Bangpath : ...!unido!fub!tmpmbx!geminix!gemini
X1000 Berlin 20
XGermany
X*/
X
X#ident	"@(#)space.c	2.07"
X
X#if defined (XENIX)
X#include "fas.h"
X#else
X#include <sys/fas.h>
X#endif
X
X/* This is the number of devices to be handled by this driver.
X   You may define up to 16 devices.  If this number is changed
X   the arrays below must be filled in accordingly.
X*/
X#define NUM_PHYSICAL_UNITS	3
X
X#if NUM_PHYSICAL_UNITS > MAX_UNITS
X#undef NUM_PHYSICAL_UNITS
X#define NUM_PHYSICAL_UNITS	MAX_UNITS
X#endif
X
X/* let the driver know the number of devices */
Xuint	fas_physical_units = NUM_PHYSICAL_UNITS;
X
X/* array of base port addresses */
Xuint	fas_port [NUM_PHYSICAL_UNITS] =
X{
X	0x3f8,	0x2f8,	0x3e8
X};
X
X/* array of interrupt vectors */
Xuint	fas_vec [NUM_PHYSICAL_UNITS] =
X{
X	0x4,	0x3,	0x9
X};
X
X/* initialization sequence for serial card
X   This array contains pairs of values of the form:
X
X        portaddress, value,
X              :
X              :
X        portaddress, value,
X        0
X
X   For every line `value' will be written to `portaddress'. If
X   `value' is replaced with the macro `READ_PORT' then a value
X   is read from `portaddress' instead. The value itself will be
X   discarded. Therefor this makes only sense if the read access
X   to the port has a side effect like setting or resetting
X   certain flags.
X
X   NOTE: This array *must* be terminated with a value of 0
X         in the portaddress column!
X*/
X
Xuint	fas_init_seq [] =
X{
X	0
X};
X
X/* initial modem control port info
X   This value is ored into the modem control value for each UART.  This is
X   normaly used to force out2 which is used to enable the interrupts of
X   the standard com1 and com2 ports.  Several brands of cards have modes
X   that allow them to work in compatible mode like com1 and com2 or as a
X   mux.  One of these cards is the AST 4-port card.  When this card is
X   used with the common interrupt out2 must not be set or there will be
X   a fight on the bus.
X
X   Note: This is one of the major trouble-spots with mux cards. Check
X         your manual.
X*/
X
Xuint	fas_mcb [NUM_PHYSICAL_UNITS] =
X{
X	MC_SET_OUT2,	MC_SET_OUT2,	MC_SET_OUT2
X};
X
X/* array of modem control flags
X   You can choose which signals to use for modem control. See fas.h
X   for possible names and values. Whether or not modem control is
X   used is determined by the minor device number at open time.
X*/
Xuint	fas_modem [NUM_PHYSICAL_UNITS] =
X{
X	EN_DTR | CA_DCD | UB_RING,
X	EN_DTR | CA_DCD | UB_RING,
X	EN_DTR | CA_DCD | UB_RING
X};
X
X/* array of hardware flow control flags
X   You can choose which signals to use for hardware handshake. See fas.h
X   for possible names and values. Whether or not hardware handshake is
X   used is determined by the minor device number at open time or by the
X   RTSFLOW/CTSFLOW termio(7) flags.
X*/
Xuint	fas_flow [NUM_PHYSICAL_UNITS] =
X{
X	HI_RTS | HO_CTS_ON_DSR,
X	HI_RTS | HO_CTS_ON_DSR,
X	HI_RTS | HO_CTS_ON_DSR
X};
X
X/* additional configurations for multiplexed interrupt boards
X   If you have a mux board, you may have to acknowledge interrupts
X   by writing to a special register. There may be a separate register
X   for every single port or for every interrupt vector or both.
X   The following arrays contain the special register addresses and
X   the corresponding values that are written to them in response
X   to an interrupt.
X*/
X
X/* array of int ack register addresses
X   These registers are written to every time after all interrupt
X   sources in the corresponding UART have been cleared.
X   Enter the addresses on a per unit base. An address of zero
X   disables this feature.
X*/
X
Xuint	fas_int_ack_port [NUM_PHYSICAL_UNITS] =
X{
X	0,	0,	0
X};
X
X/* array of int ack values
X   These values are written to the corresponding int ack register
X   in response to an interrupt.
X*/
X
Xuint	fas_int_ack [NUM_PHYSICAL_UNITS] =
X{
X	0,	0,	0
X};
X
X/* array of int ack mux register addresses
X   These registers are written to every time after all interrupt
X   sources in all of the UARTs that are tied to the corresponding
X   interrupt vector have been cleared.
X   Enter the addresses on a per vector base. An address of zero
X   disables this feature.
X*/
X
Xuint	fas_mux_ack_port [NUM_INT_VECTORS] =
X{
X	0,	0,	0,	0,
X	0,	0,	0,	0,
X	0,	0,	0,	0,
X	0,	0,	0,	0
X};
X
X/* array of int ack mux values
X   These values are written to the corresponding int ack mux register
X   in response to an interrupt.
X*/
X
Xuint	fas_mux_ack [NUM_INT_VECTORS] =
X{
X	0,	0,	0,	0,
X	0,	0,	0,	0,
X	0,	0,	0,	0,
X	0,	0,	0,	0
X};
X
X/* NOTHING NEEDS TO BE CHANGED BELOW THIS LINE.
X   ============================================
X*/
X
X/* array of structures to hold all info for a physical minor device */
Xstruct fas_info	fas_info [NUM_PHYSICAL_UNITS];
X
X/* array of ttys for logical minor devices */
Xstruct tty	fas_tty [NUM_PHYSICAL_UNITS * 2];
X
X/* array of pointers to fas_info structures
X   this prevents time consuming multiplications for index calculation
X*/
Xstruct fas_info	*fas_info_ptr [NUM_PHYSICAL_UNITS];
X
X/* array of pointers to fas_tty structures
X   this prevents time consuming multiplications for index calculation
X*/
Xstruct tty	*fas_tty_ptr [NUM_PHYSICAL_UNITS * 2];
SHAR_EOF
true || echo 'restore of space-c1-3 failed'
rm -f _shar_wnt_.tmp
fi
rm -f _shar_seq_.tmp
echo You have unpacked the last part
exit 0
-- 
Uwe Doering  |  Domain   : gemini at geminix.in-berlin.de
Berlin       |----------------------------------------------------------------
Germany      |  Bangpath : ...!unido!fub!tmpmbx!geminix!gemini



More information about the Comp.unix.sysv386 mailing list