Help: VaxStation 3200 + Emulex PDM/380

Alex Woo woo at pioneer.arc.nasa.gov
Fri Dec 23 03:49:08 AEST 1988


Reply-to: woo at pioneer.arc.nasa.gov (Alex Woo)


We recently purchased a VaxStation 3200 and an EMULEX 
MD21 SCSI disk controller+ PDM/380 subsystem to run Ultrix.
The Ultrix startup procedure will not recognize the EMULEX
drives and consequently will not load onto them.  It appears
that neither DEC nor EMULEX wishes to address this problem,
so we are wondering if anyone else on the network has
made a 3200 recognize the EMULEX subsystem.

The same hardware runs VMS 4.7 just fine.

Any help would be greatly appreciated.  Please send mail
directly as I do not read this mailing list.

Thanks.

======================================================================
Alex Woo, MS 227-2		|	woo at pioneer.arc.nasa.gov
NASA Ames Research Center	|	woo at ames-nas.arpa
Moffett Field, CA 94035		|	{seismo,topaz,lll-crg,ucbvax}! 
Phone: (415) 694-6010		|	ames!pioneer!woo
======================================================================
  {hplabs,hao,ihnp4,decwrl,allegra,tektronix,menlo70}!ames!pioneer!woo
======================================================================



More information about the Comp.unix.ultrix mailing list