UUCP line speed limitation
leon howorth
leonh at hhb.UUCP
Wed Oct 3 07:57:41 AEST 1990
I am running a VAX 11/785 with Ultrix 2.2 (I know, very old release
but I can't upgrade quite yet). I am trying to get uucp to work
with a Telebit modem on a DMF32 port at 19200 baud. I can run a
terminal on the port at 19200 but when I try to run uucp I get
a "BAD SPEED" message from uucico and it fails. Leads me to think
that the software does not support that speed, even though the
hardware is capable. Does anyone know of a patch I can apply to
run uucp at 19200 on the port ?? Here are some of the important
administrative entries:
/etc/ttys: # Note: modem used for outgoing only
ttyd3 "/etc/getty std.19200" dialup off modem # DMF port1
/etc/acucap:
#Telebit Trailblazer on DMF32 port - outgoing only
tb19200|trailblazer|Telebit Trailblazer-Plus 19200 baud, Touch tone:\
:si:cr:hu:ls:re:ss=\dA\dA\dATZ\r:sr=OK:sd#250000:di=ATS50=255DT:dt=\r:\
:dd#50000:fd#80:rs=,:os=CONNECT:ds=\dA\dA\dATZ\r:ab=\dA\dA\dATZ\r:db:
/usr/lib/uucp/L-devices:
ACU ttyd3 ttyd3 19200 tb19200
/etc/gettytab:
H|std.19200|19200-baud:\
:sp#19200:
--
Leon A. Howorth | UUCP: ....princeton!hhb!leonh
Computer Operations Manager | ARPA: leonh%hhb at princeton.edu
Racal-Redac | VOICE: 201-848-8000 ext. 243
Mahwah, New Jersey 07430 | FAX: 201-848-8189
More information about the Comp.unix.ultrix
mailing list