Need help with LN03R connected to DEC3100.
Mike Ewan
mike at raven.uss.tek.com
Wed Jan 30 07:09:57 AEST 1991
In article <1991Jan28.204543.21992 at noose.ecn.purdue.edu>, jmoore at cidmac.ecn.purdue.edu (James D Moore) writes:
|> Greetings,
|>
|> I would appreciate the advice and help of anyone who has information
|> on how to connect a DEC LN03R ScriptPrinter or an LN03 to a DECsystem
|> 3100 running 4.1.
|>
|> Configuration :
|> (1) DECsystem 3100 running 4.1
|> (2) 3 DECstation 3100 clients.
|> (3) 1 LN03R ScriptPrinter
|> (4) 1 LN03 Laser Printer
|>
|> Problem:
|>
|>
|> (1) Is it possible to set the printer up for the serial port ? If so how ??
You should be able to but I don't have one so can't help here.
|> (2) How can I set up the printer queueing so that it goes to just one
|> machine for all of the clients.
Use the 'rm' field in /etc/printcap or use the lprsetup command, and
use the same entry for all clients.
For example:
# @(#)printcap 2.2 (ULTRIX) 4/12/89
lw50|ps|psc|lw|postscript printer in 50 :\
:lp=:\
:mx#0:\
:rm=remote_hostname:\
:rp=lw50:\
:sd=/usr/spool/lpd/lw50:
|> (3) Will a client (16mb) function as a print spool server reliably without
|> effecting the performance too much.
I should think so. Lpd is pretty low overhead unless it's going
constantly.
Mike
--
Michael Ewan (503)627-6468 Internet: mike at raven.USS.TEK.COM
Unix Systems Support UUCP: ...!uunet!raven.uss.tek.com!mike
Tektronix, Inc. Compuserve: 73747,2304
"Fig Newton: The force required to accelerate a fig 39.37 inches/sec."--J. Hart
More information about the Comp.unix.ultrix
mailing list