ULTRIX on VAXstation II/GPX

[Michael Ewan]

In article <1991May9.190639.25124 at ux1.cso.uiuc.edu>, melanie at director.beckman.uiuc.edu (Melanie Anderson) writes:

|> from the 'qd' man page:
|> 
|>      If there is a VCB02 module at the standard address, the sys-
|>      tem will use it as the system console.  All input/output
|>      destined for /dev/console will use the VCB02 instead.
|> 
|> so you can call it anything you want because you have to make the device
|> yourself with mknod:


Except that you also need to remove the VCB02 card set from the machine entirely.
Maybe that's what you implied.  If the system sees the VCB02 at boot it will use 
it for the console, and the 9-pin port will be dead.

Mike

-- 
 Michael Ewan    (503)627-6468      Internet:  mike at raven.BV.TEK.COM
 Unix Systems Support                   UUCP:  ...!uunet!raven.bv.tek.com!mike
 Tektronix, Inc.                  Compuserve:  73747,2304
"Fig Newton: The force required to accelerate a fig 39.37 inches/sec."--J. Hart