SI controller hangs with 9766 drives.

[Rick Auricchio]

--------
[]
>         [mention that problem disappeared with new disk HDA]
>  .... I know  of a guy with a 750 using whatever SI calls an MBA on
>those with the same problems.
>
> This is either a virus or a hardware bug. Since SI won't admit to a hardware
>problem (until the fixes are out) it MUST be a virus, right?

It *must* be a virus, transmitted by netnews!  This *just* happened on our 750
today (with SI 9766's on MBA); hitting RESET on the SI 9400 controller made the
system wake up again (the hp.c driver reread the bad block table, incidentally),
and all took off normally.  Of course, then the other 750 hung in its internet
code, so it wasn't quite as lucky.

ANY INFO on this would be appreciated; it's not serious (yet), but I would
like to know what's going on...
==============================================================================
Opinions expressed have been generated solely by line-noise.
{cbosgd,decwrl,hplabs,ihnp4,seismo}!nsc!cadtec!rick    N1150G   (408) 942-1535
	    "It only rains when you have something planned."