SCO 3.2.2 & RTSFLOW CTSFLOW

[Cerafin E Castillo]

I would highly recommend the Digiboard Mux or the Anvil Designs 
Stallion or Brumby Mux boards, as well as Maxpeed boards.  I have
used these boards, while at TELEBIT, on my SCO XENIX 2.3.2 system
with RTS/CTS flow control and never had a problem at 19200 or
below.  Give it a try.  If you are using your cpu serial ports,
make sure that they have 16450/16550 fro best performance with
your TELEBIT modem.  Good Luck!

===============================================================================
Cerafin E. Castillo                       ||      //\\  ||\\  ||
Network Consultant                        ||     //__\\ || \\ ||  Los Altos
Los Altos Networks                        ||    // ---\\||  \\||  Networks
340 Second St. #6                         ||___//      \ |   \ |
Los Altos, CA  94022
(415) 941-8031      UUCP:     {apple,sun,uunet}!portal!cup.portal.com!cec
                INTERNET:     cec at cup.portal.com

                      "...No hay mal que por bien no venga..."
===============================================================================