SCO XENIX 2.3.2 on i486

[Marty Wiedmeyer]

Greetings!

We have SCO XENIX 386 2.3.2 and I have been asked to install it on an 
NCR PC486/MC25.

Two questions:

1)	Does it run? I know ODT runs, but it's UNIX, not XENIX.

2)	How to copy the distribution disks to 3.5. I have 5.25" media.
	I believe I've copied all of the disks with 
	dd if=/dev/fd096ds15 of=/dev/fd1135ds18. The one problem I
	have is with the Installation Boot floppy (N1). It won't boot!
	I tried making a bootable disk with mkdev fd and dd'ing N1 to
	it to no avail.

Any tips would be greatly appreciated!

Marty Wiedmeyer

-- 
mort at dhump.lakesys.com 				uunet!marque!dhump!mort