Telebit Modem and SCO Xenix 2.3.2

[Bob Willey]

In article <62 at raysnec.UUCP> shwake at raysnec.UUCP (Ray Shwake) writes:
>>In article <1719 at fallst.UUCP> tkevans at fallst.UUCP (Tim Evans) writes:
>>>Can someone send appropriate 'gettydefs' entries for enabling
>>>incoming calls on a Telebit T2500.  Default to 9600 with
>>>cycling to other speeds.  Also, an approriate entry for 
>>>'ttys' and correct S Register settings for the modem (and
>>>for the T2500 calling it)?
>
>I suggest you abandon the idea of "cycling" altogether. Set your interface
>at 9600 and "lock" the speed (S66=1). Let your Telebit speed-adjust with
>its counterpart. My TB+ worked like a champ under Xenix 2.3.2, still works
>(unmodified) under SCO ODT, whether interfacing to my NEWS feed (running
>TB+ as well) or to my home box (2400 baud Hayes-compatible).


Well there appears to be many ways to skin this cat.
We had problems when trying to open "locked", but has worked like
a champ with cycled.  We have a Telebit T18PC, and connect to several
sites with Telebit +, and about 15 sites with 2400 Hayes compatibles,
and seem to be running fine, making daily connects to all sites.


There may be something wrong with the above, but it has been
working fine for about 6 months now.

Any comments are welcome (well almost any)

-- 
>.. CCS Enterprises, Inc.           ..    Bob Willey, CDP     ..<
>.. P.O. Drawer 1690                ..    uunet!consult!bob   ..<
>.. Easton, Maryland  21601         ..    (301) 820-4670      ..<
>.......................BBS: (301) 476-5098.....................<