Telebit TrailBlazer-Plus

[Steve Manes]

>From article <4137 at turnkey.TCC.COM>, by sandy at turnkey.TCC.COM (Sanford 'Sandy' Zelkovitz):
> I am presently using on alphacm the TrailBlazer-Plus modems; however, I am
> having on "hell-of-a-time" trying to find the "optimum" register settings!

Not surprisingly, everyone goes through this with their new Telebit. 
Here's the settings I use in dialTBIT.c for my (dumb) Digiboard COM/8 board:

(MDSETUP1) "AT&FE0F1M0Q4V1X3S0=1S2=043S11=50S45=0S48=0S50=0S51=255S52=2S95=2\r"
(MDSETUP2) "ATS53=4S54=3S55=0S58=3S60=0S66=0S68=255S92=1S110=255S111=255&W\r"
(MDXONXOFF) "ATS58=3\r"
(MDDIALUUCP) "ATS7=60S50=255S111=30\r"
(MDDIALOUT) "ATS66=0S110=255\r"

Recompile and run "dialTBIT -z" to reset the CMOS.


I also have these Dialers entries for different dialouts (in Devices):

tb1200	=W-,	"" A\pA\pA\pA\pT OK ATs0=0s7=100s50=2s95=0DT\T CONNECT
tb2400	=W-,	"" A\pA\pA\pT OK ATs0=0s7=100s50=3s95=0DT\T CONNECT
tbfast	=W-,	"" A\pA\pA\pT OK ATs0=0s7=100s50=255s111=30s110=0DT\T CONNECT
tbfastcu =W-,	"" A\pA\pA\pT OK ATs0=0s7=100s50=255s111=0s110=0DT\T CONNECT
tbfastb	=W-,	"" A\pA\pA\pA\pT OK ATs7=100s50=255s111=30s110=0DT\T
CONNECT \K\p\K\d
Ntbfast	=W-,	"" A\pA\pA\pT OK ATs7=100s50=255s111=0s110=0DT\T CONNECT
Ytb1200	=W-,	"" A\pA\pA\pT OK ATs50=2s111=20DT\T CONNECT
Ytb2400	=W-,	"" A\pA\pA\pT OK ATs50=3s111=20DT\T CONNECT
Ytbfast	=W-,	"" A\pA\pA\pT OK ATs7=100s50=255s111=20DT\T CONNECT

-- 
Steve Manes		Roxy Recorders, Inc.		Magpie-HQ BBS
UUCP : {rutgers|cmcl2}!hombre!magpie!manes		(212)420-0527
Smail: manes at MASA.COM