adaptec 2322 cont / maxtor 338 drive / 386 Xenix

[Kevin Davies]

In article <794 at applix.UUCP>, jim at applix.UUCP (Jim Morton) writes:
> I'm looking at a Maxtor 338 meg ESDI drive, but to put it in my Xenix system
> I need the bus to see it as a WD1010 compatible drive, not native ESDI.
> Adaptec tells me that the 2322 does appear to the system as a regular
> AT ST506 controller, like a WD 1003.

If the controller itself will appear as a normal ST506 controller to
the system, then you only require the basic version of Xenix (whether
you're running an ESDI drive or not).

If you have a controller that will only appear as an ESDI controller
to the system, then you need the ESDI version of Xenix.

-- 
Kevin Davies		International Information Service (IIS)
UUCP:  {uunet,utai,watmath}!dalcs!iisat!kevin
Bitnet/Uucp: kevin at iisat.uucp	 Arpanet: kevin%iisat.uucp at uunet.uu.net