SCO best, Mport 2nd, ISC third

system admin jeff at swusrgrp.UUCP
Wed Feb 8 03:59:45 AEST 1989


My site was down for a while so I don't know if this ever got out on the net.


In article <2410 at stiatl.UUCP> todd at stiatl.UUCP (Todd Merriman) writes:
>Our company is trying to select a Unix (Sys. V) for 386.  On the
>basis of:

I recently did an extensive evaluation of all three of the major PC-AT based
UNIX operating systems - SCO, Interactive, and Microport. The results will
be published in an upcoming Infoworld article.  I have also sold and
installed both SCO and Interactive products to my customers.

I don't know the particulars of your application but based upon my experience
and evaluation I can offer you my conclusions:

>   SVID compliance

All of them claim this. The only way to be sure is to port your application
over and test it. All three will more than likely run fine.

>   Availability of drivers for add-on peripherals

SCO has by far the most drivers available either within the product or from
third party vendors. Drivers are available for dozens of different types of
devices including dumb serial cards, intelligent serial cards, MFM, RLL,
ESDI, and SCSI disk drives, a wide variety of tape units, video boards, etc.
Interactive Systems also has a large number of drivers available but not as
many as SCO. Microport has the least number available.

>   Support for X-Windows

They all have in some form or other, but not completely. It's really all
up in the air at this point. I'd say that Interactive leads in this area.

>   Ethernet-TCP/IP support

SCO and Interactive support Ethernet-TCP/IP.  Check out Interlan's TCP/IP
products for both SCO and Interactive.

>   Quality of documentation and support

Interactive has very little documentation, offering Prentice Hall's ATT
UNIX 386 manuals as an option. SCO documentation although improved still
needs to be cleaned up and made more professional looking. I liked the 
documentation from Microport (although it's mostly ATT based). They give
you a couple of nice guides which are invaluable to a novice UNIX user.
Microport also has the sharpest looking covers of the three vendors.

SCO offers the most extensive support plan of all three including a BBS,
monthly newsletter, and bug fix bulletin. Microport has telephone support
contracts and services available but not as extensive as SCO. Interactive's
support policies are an abomination. You must go through your dealer or 
distributor to get support or updates. And the cost of their latest update
(version 2.0) is so high that it could cause their customers to convert over
to SCO or Microport. They don't seem to be in touch with the market.

>   3rd party software availability

The lions share of applications are available for SCO. And with their new
version 2.3.1 available with UNIX 386 COFF file compatibility they can't
be touched in this area. Microport comes in second and Interactive is a 
distant third (although their 2.0 version is supposed to be XENIX
compatible, it's too early to pass judgement.)

>   No system call differences with 3B2 and Convergent (shmem(), semctl())

I can't say with your particular application, you'll have to try it out.
That's the only way to tell. Don't trust unproven promises.
 
>   Up-to-date curses and terminfo

All the vendors do a pretty good job of keeping up-to-date with termcaps
and terminfo.  SCO just recently released a new & larger termcap and 
terminfo database that includes previously unsupported terminals. And
you can always find someone on the net who has a solution to "termcap hell".

>   Full complement of uucp utilities

All three offer HoneyDanBer UUCP utilities. Both SCO and Interactive have a
menu driven front end for setting up uucp.

>The system in production will be handling multiple communications
>sessions with modems and a user interface under X-Windows.

I have two 386 boxes in my office, one with SCO, one with Interactive,
and a friend of mine down the street has a 386 running Microport. We have
no problems with any of the systems.  SCO has a nice Telebit Trailblazer
dialer in binary. I do suggest getting a smart card for your system.  Most 
of the AT boxe's standard serial ports are best described as "dog meat".
Avoid using COM1 or COM2 at all costs.

>What are your suggestions?

To summarize:
I like Interactive 386/ix for it's performance and purity. They have an
excellent product but the poorest support. If they would get in tune with
the market, offer better support, they could pose a serious threat to
SCO. Technically they are the best.

SCO has a nice product, especially 2.3.1 but not all their binaries take
advantage of the 80386 chip. Try running 'find / -exec file {} \; | grep 8086'
and see how many of the utilities are in 8086 binary form. Yuk. But it's a
minor gripe because they have excellent support, good documentation,
good support people, great update policies and the largest software base.
SCO is also getting lean and mean, ready for the long haul.

Microport has a good product, almost as pure as Interactive's but they need
to provide more driver support. Their prices are the best of all three.
If all you want is bang-for-the-buck, Microport wins. Nice people too.
(I don't know what is happening with their phone system though!)

All three vendors have happy and unhappy customers. I've heard of horror
stories and I've of heard success stories about all three.

The ideal or dream UNIX 386 product would be a combination of:
1) Interactive's technical side, 2) SCO's support, marketing and XENIX code,
and 3) Microport's prices and documentation.


-- 
Jeff Tye @ Copperstate Business Systems                   VOICE (602) 244-9391
ncar!noao!asuvax!hrc!swusrgrp!jeff         southwest!/usr/group (602) 275-2541



More information about the Comp.unix.xenix mailing list