XENIX386 version 2.3.1 and uucp

Frank I. Reiter frank at rsoft.UUCP
Tue Jan 24 01:31:25 AEST 1989


In article <5310 at turnkey.TCC.COM> sandy at turnkey.TCC.COM (Sanford 'Sandy' Zelkovitz) writes:
>I have been experiencing MANY FAILED (conversation complete) when callers have
>been requesting files to be transferred via uucp using Xenix386 version 2.3.1
>and the Telebit Trailblazer-Plus modem.
[Stuff deleted]
>I am afraid that the real problem is with SCO's HoneyDanber port!

I am using exactly the same setup with no trouble at all.  I have seen this
problem before, however, from a fellow that attempted to establish a UUCP
connection with me.  Mail would be sent fine, but files would fail after a
timeout.  He was not using HDB, but WAS I believe using a trailblazer.  At
that time I was not.

Hope this helps.

-- 
*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*
Frank I. Reiter             \ /    UUCP:    {uunet,ubc-cs}!van-bc!rsoft!frank
Langley, British Columbia   / \     BBS:    Mind Link @ (604)533-2312
*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*



More information about the Comp.unix.xenix mailing list