New Support services from SCO
Bob Willey
bob at consult.UUCP
Tue May 23 16:10:58 AEST 1989
In article <1323 at sagepub.UUCP> dfm at sagepub.UUCP (David F. McCune) writes:
>In article <3188 at viscous.sco.COM> uunet!sco!rosso (Ross Oliver) writes:
>>
>>All files are in
>>the directory /usr/spool/uucppublic/SLS. Get the file
>>/usr/spool/uucppublic/SLS/info for a list of available files, and
>>instructions on how to install the supplements after downloading.
>
>Could some nice soul who manages to get into the sco machine please
>post the info file? (Ross, are you listening? -- :-) )
>
>Thanks!
>
>-David
>
>
>
>
>--
> David McCune, Sage Publications, Inc.
> 2111 West Hillcrest Drive, Newbury Park, CA 91320
> dfm%sagepub at quad.com uucp: ...srhqla!sagepub!dfm
> voice: (805) 499-0721 fax: (805) 499-0871
List of SLS files available for transfer using UUCP
Last updated: 5/12/89
Machine name: sosco
Phone numbers: (408) 425-3502 (300-2400 baud)
(408) 429-1786 (9600 baud Telebit)
Login name: uusls (forth character is the letter "l" rather than numeral "1")
No password
Below is a list of the Support Level Supplements available for UUCP
request in the directory /usr/spool/uucppublic/SLS. The files ending
in .z have been reduced in size using the SCO XENIX pack(C) utility.
These files must first be unpacked using unpack(C). Files ending
in .ltr are the cover letters and installation instructions for
the corresponding Supplements. The cover letters assume you have
received the Supplements on diskette. To install a Supplement, you
must first transfer it to a diskette using this procecure:
1. Request UUCP to transfer to your system the SLS file
and cover letter file for the desired supplement.
2. Expand one or both of the files as necessary using unpack(C).
3. Format a diskette that is large enough to contain the
supplement file.
4. Use the dd(C) command to transfer the supplement file to the
diskette. For example, if the supplement file is "xnx102" and
is in the /usr/spool/uucppublic directory on your system, and
the diskette is a 5.25-inch, 360K, the command would be:
dd if=/usr/spool/uucppublic/xnx102 of=/dev/rfd048ds9
Substitute the appropriate device name for "/dev/rfd048ds9" if
transferring to a diskette of another capacity. However, always
used the character device. The diskette must be formatted using
the format(C) command before the data can be transferred.
5. Follow the installation instructions given in the cover letter file.
------------------------------------------------------------------------------
Support Level Supplements available by UUCP request
File name Size(bytes) Description
xnx087.z 7500 386 Shadow Sperry 4 Port
xnx087.ltr 774
xnx089.z 129423 SunRiver Driver for 2.2.2 and 2.2.3
xnx089.ltr.z 11017
xnx096.z 173028 286 Shadow Sperry 4 Port
xnx096.ltr 782
xnx098.z 11441 Irwin 20-megabyte format(C)
xnx098.ltr 620
xnx102.z 44994 Multiple Mountain Tape Drives
xnx102.ltr 9592
xnx104.z 420319 Excelan TCP/IP Supplement for XENIX 2.3
xnx104.ltr 1246
xnx105.z 43077 RTS/CTS Handshaking Supplement for 2.3
xnx105.ltr 872
xnx107.z 2490 /etc/rc for 286 2.2.3
xnx107.ltr 619
xnx108.z 123531 SunRiver Driver for SCO XENIX 2.3.1 386
xnx108.ltr.z 18637
xnx114.z 138839 DiSCOver technical articles
xnx114.ltr 763
xnx115.z 5845 Fixes Slow parallel printing problems for
xnx115.ltr 1064 SCO XENIX 386 2.3.0 and 2.3.1
xnx116.z 14435 Allows SCO XENIX 2.3 to read mapkey files
xnx116.ltr 1033 from SCO XENIX 2.2
xnx118.z 60749 QIC-40 tap driver for SCO XENIX 386
xnx118.ltr 4688 releases 2.2.3 and 2.3.1.
xnx120.z 36527 Corrects "ps seek error" for SCO XENIX
xnx120.ltr 1164 386 release 2.3.0 and 2.3.1
xnx122.z 52511 Driver for Archive VP409 Microchannel
xnx122.ltr 6065 tape drive controller
xnx124.z 32708 Corrects fsck abort problems for SCO XENIX
xnx124.ltr 1422 386 releases 2.3.0 through 2.3.3
xnx126.z 22648 Allows kernels larger than 640K to boot
xnx126.ltr 1191 For SCO XENIX 386 2.3.1.
xnx128.z 262004 Corrects "garbage or loose cable" error using
xnx128.ltr 1812 certain internal modems.
xnx130.z 84017 Driver for SCO XENIX 386 2.3.1 and 2.3.2 that
xnx130.ltr 3151 supports all of the following drive models:
125, 145, 185, 225, 245, 285, 2020, 2040,
and 2080.
xnx133.z 59248 Corrects problems with using the WD1007A
xnx133.ltr 1927 disk controller. For SCO XENIX 286,
release 2.2.3, and all 2.3 releases.
More information about the Comp.unix.xenix
mailing list