Xenix and variable rate incoming calls?

[Larry Snyder]

>This is fine but also you should tell callers that they need to use
>break to get the right baudrate.   If you are getting garbage character,
>you are in wrong baudrate and press break to allow getty to go to
>another line of gettydefs.   Be sure to check your /etc/gettydefs on

Unless the host is using a high speed modem.  On my modems (2 Hayes V-Series
V.42, USR HST 14.4 kb carrier & Telebit T2000) I lock the ports at 19,200
baud and don't use a rotating gettdefs - but let the modem do the
"downshifting".