Xenix disk problems
David F. McCune
dfm at sagepub.UUCP
Tue Oct 10 18:33:50 AEST 1989
I have a strange disk problem. First, the machine:
* Xenix 2.3.3
* Everex Step/25
* 320 MB Miniscribe disk w/ Adaptec controller
Earlier today I got a hard disk error on a couple of sectors. So
I shut the system down and then ran badtrk. (First, I discovered
that I can only run badtrk in "quick" mode; if I try "thorough"
mode, badtrk crashes and says "badtrk: could not malloc." Anyone
know what causes this?) Badtrk marked several new bad sectors.
A bit later I discovered that if I run "df -v" I get the following
output:
Mount Dir Filesystem blocks used free % used
/ /dev/root 619050 605126 13924 98%
But the disk is not nearly that full! Earlier today it had only
a bit over 100 megs used (about 215,000 blocks). And if I
run "du -s" from the root directory, I am told I am using approx.
230,000 blocks. And when I do a "tar" to tape and then total all
the bytes that have been written to the tape, I get about 215,000.
I have tried running fsck, but it doesn't seem to find any problems.
Can anyone tell me how to recover the missing free space?
Thanks much!
David
--
David McCune, Sage Publications, Inc.
2111 West Hillcrest Drive, Newbury Park, CA 91320
voice: (805) 499-0721 fax: (805) 499-0871
domain: dfm at sagepub.com uucp: ...uunet!sagepub!dfm
More information about the Comp.unix.xenix
mailing list