Trailblazer w/ UUCP: low throughput

[Bill Vermillion]

In article <[25462daf:112.1]comp.unix.xenix;1 at nstar.UUCP-> akcs.larry at nstar.UUCP (Larry Snyder) writes:
->>program and I can only get about 6100 baud max throughput.  Rough timings
->>of cu "catting" a file yield about 11000 baud throughput.  Could someone
->>send me the TB register settings/dialer scripts/etc. that are needed to
->
->Make sure you set the modem up with hardware handshaking and lock
->the interface at 19200.  I am running SCO 2.3.2 and 9 times out of 10
->get 1400+ cps on transfers using dialTBIT.   I'll email my nram
->configuration.

And make sure that both modems DON'T have s111 set to 255.  This is a common
mistake.  The  way all the local nodes around here have done is set s111=255
in nvram, and then place the calls AFTER resetting s111=30.  You can NOT
change this after the connection.


-- 
Bill Vermillion - UUCP: {uiucuxc,hoptoad,petsd}!peora!tarpit!bilver!bill
                      : bill at bilver.UUCP