windowing system (wm) for 286 2.3.2

[Roger Cornelius]

Re: the windowing system recently talked about in the following post:

-From: ray at madnix.UUCP (Ray P. Hill)
-Newsgroups: comp.unix.xenix
-Subject: Re: Windowing system
-Message-ID: <915 at madnix.UUCP>
-Date: 1 Oct 89 21:49:14 GMT
-References: <1989Sep20.000443.18268 at rpi.edu> <37470 at conexch.UUCP>
-Reply-To: ray at madnix.UUCP (Ray P. Hill)
-Organization: ARP Software, Madison, WI
-Lines: 26
-
-In article <37470 at conexch.UUCP> root at conexch.UUCP (Larry Dighera) writes:
-| In article <1989Sep20.000443.18268 at rpi.edu> fargo at pawl20.pawl.rpi.edu.UUCP 
-| (Irwin M. Fargo) writes:
-| > Can anyone point me towards a windowing system for SCO Xenix 286, v2.2.1?
-| > Public domain or low priced commercial packages would be helpful.
-| You'll find what you are looking for available for anonymous UUCP transfer
-| residing in /usr3/public/wm286.tar on conexch.  There's a Systems/L.sys 
-| entry in the .signature.
-|
-| Larry Dighera
-| -- 
-| USPS: The Consultants' Exchange, PO Box 12100, Santa Ana, CA  92712
-| TELE: (714) 842-6348: BBS (N81); (714) 842-5851: Xenix guest account (E71)
-| UUCP: conexch Any ACU 2400 17148425851 ogin:-""-ogin:-""-ogin: nuucp
-| UUCP: ...!uunet!spsd!conexch!root || ...!ccicpg!conexch!root
-
-What a utility! No 286 XENIX should be without this one. Its like having
-multi-screens at any terminal not just the console. Who's been keeping this
-program a secret?
-
-Thanks Larry for anonymous UUCP to get to it.
-
-						Ray Hill
--- 
-UUCP: {harvard|rutgers|ucbvax}!uwvax!astroatc!nicmad!madnix!ray
-                                 {decvax|att}!

This package also runs fine under 2.3.2 (update R) on the 286, and
you don't need to install the pty stuff since 2.3.2 already has them.

2.3.2 also has mscreen which is similar, but I haven't figured out how
to get it working yet.  I tried the included wyse50 mscreencap entry
while using a wyse50e, but it just displayed the mscreen menu, cleared
the screen, then locked up.  Does anyone have a working mscreencap entry
for ansi which will work from a console multiscreen?  I assume one
created for Xenix 386 would work the same on the 286.

Roger
--
Roger A. Cornelius           rac at sherpa            uunet!sherpa!rac