const, volatile, etc [LONG]

Piercarlo Grandi pcg at aber-cs.UUCP
Sat Dec 3 11:14:12 AEST 1988


In article <9033 at smoke.BRL.MIL> gwyn at brl.arpa (Doug Gwyn (VLD/VMB)
<gwyn>) writes:

    Aggressive optimization is the new wave, brought on partly by all
    those C compiler races published in hobbyist magazines.  Most of
    the time, faster-running code is an advantage, so generally this is
    a good thing.

My extreme hostility to "volatile" (and, as I had forgot to mention,
making all standard procs names "reserved words") stems exactly from
this: C has been beautifully designed so as to allow for a simple
compiler that does not do aggressive code optimization, and volatile
(and "reserved word" procs) instead try to make respectable the idea
that a complex expensive optimizer will give you substantially better
performance than a little ingenuity. In a sense volatile (and "reserved
word" procs) are there mostly to allow cheating on well known
benchmarks by peddlers of complex compilers.

First of all, in a sense, volatile and register exclude each other; in
traditional C all variables are volatile save for those declared to be
register (and this explains why there is a restriction on &...).

People who really care about speed know that register is perfectly
adequate, IF USED COMPETENTLY, given a compiler that does a
straightforward but COMPETENT generation job (most tuned PCCs), to make
non benchmark programs run fast.  Indeed, compiler selection of
variables to put in registers, among those not declared volatile,
usually is based on STATIC frequency of use, while the programmer knows
better about DYNAMIC frequency of use, because he/she understands the
algorithm and has an idea of its hot spots, either from theory or from
profiling.

Arguments for volatile, as opposed to register, are essentially:

    [1] you cannot trust programmers to be competent and understand
    what they are writing, or at least not enough to place appropriate
    register declarations; in that case an automatic optimizer will
    possibly improve things, even if it does a purely static analysis.

    [2] you want people to pay a lot of money for your latest
    optimizing compiler technology for C, and you want it to be blessed
    by dpANS, so you can say of other compilers "they do not
    have/implement volatile" without people questioning whether it is
    useful at all (it's in the standard!).

As to point [1], unfortunately you need damn competent programmers that
understand a lot of the subtleties of their program to place volatile
where it is needed, and only there, otherwise they will be inclined,
for safety, to declare everything in sight to be volatile...

As to point [2], it makes a lot of sense if you want your customers to
believe that they can put their crusty old C codes, and ZAP! they will
run like greased lightining on your large register set CPU, without
rewriting, thanks to the optimizer; they wil normally not have read
that old SIGPLAN paper that found the knee for C variables in registers
at FOUR, and all the stastics on the median (low) complexity of
expressions and statements.

And your customers probably are full of things like the dot prod loop
coded like this, by somebody that knows algebra but not programming:

    float a[M][X], b[X][N], c[M][N];
    int i,j,k;

    for (i = 0; i < M; i++)
    for (j = 0; j < N; j++)
	    c[i][j] = 0.0;

    for (i = 0; i < M; i++)
    for (j = 0; j < N; j++)
	    for (k = 0; k < X; l++)
		c[i][j] += a[i][k] * b[k][j];

instead of the obviously proper better structured and efficient C way
(slicing, and using register pointers):

    /*INLINE*/ float rowcol
    (
	register float *aix, register float *bxj,
	register unsigned e, register unsigned s
    )
    {
	register float p = 0.0;

	for (aix, bxj, e; e != 0; aix += 1, bxj += s, --e)
	    p += *aix * *bxj;

	return p;
    }

    float a[M][X], b[X][N], c[M][N];
    float *cix, *aix;
    float *bxj, *cij;

    for (cix = c, aix = a; cix < c+(M*N); cix += N, aix += X)
	for (cij = cix, bxj = b+(cij-cix); cij < cix+N; cij++, bxj += X)
	    *cij = rowcol(aix,bxj,X,N);

Note also the following two points:

    [1] Placing register is a lot safer than placing volatile, as you
    never make a program wrong by declaring a variable register, but it
    may be wrong if you fail to place volatile where it is needed.

    [2] In any case, because of the 80%/20% rule, it is usually
    beneficial only to put a few variables in registers, and you do not
    usually need a lot of thought to identify them. Volatile means that
    all non volatile variables may be put in registers, but usually
    this does not help a lot, becaus eof the rule...

Summing up:

    [1] volatile is useless; you only need a compiler that does good
    code generation (usually good peephole optimization is enough), and
    the ability to place register tags where necessary.

    [2] volatile is a loss; it is a new keyword, a new and difficult
    concept, one that makes programs wrong if omitted, and one that
    gives the illusion that complex, highly optimizing compilers are
    really necessary for C, which was carefully designed, with several
    restrictions, and with register, not to require them.

As to the last point, when I first studied C many years ago, I was
really struck by the cleverness of having a register storage class, its
careful definition, the obvious advantage of having the programmer
select the few crucial variables to cache, obviating the need for a
complex and large optimizer to do the same job, only worse.
-- 
Piercarlo "Peter" Grandi			INET: pcg at cs.aber.ac.uk
Sw.Eng. Group, Dept. of Computer Science	UUCP: ...!mcvax!ukc!aber-cs!pcg
UCW, Penglais, Aberystwyth, WALES SY23 3BZ (UK)



More information about the Comp.lang.c mailing list