problem on 386i w/ laserwriter II

[Richard Smith]

Hi Jeff,

For one thing, you could try specifying the baud rate of the port in your
printcap entry. Also, check out the "fc", "fs", "xc", and "xs" fields in
/etc/printcap. I suspect you will have to muck about with some of these
even if you get Transcript from Adobe. Our printcap entry looks like this:

lw|ps|postscript|PostScript:\
        :lp=/dev/lw:\
        :br#9600:rw:fc#0000374:fs#0000003:xc#0:xs#0040040:mx#0:sf:sb:\
        :if=/usr/local/lib/lw/psif:\
        :of=/usr/local/lib/lw/psof:\
        :gf=/usr/local/lib/lw/psgf:\
        :tf=/usr/local/lib/lw/pstf:\
        :nf=/usr/local/lib/lw/psnf:\
        :vf=/usr/local/lib/lw/psvf:\
        :sd=/usr/spool/lw:\
        :af=/usr/adm/lw.acct:\
        :lf=/usr/spool/lw/lw-log:

Thanks,
Richard Smith
Smiddy at spam.istc.sri.com