SG Iris, modems

[Dave Olson]

In <1990Dec9.032649.8633 at unixland.uucp> bill at unixland.uucp (Bill Heiser) writes:

| In article <12706 at medusa.cs.purdue.edu> mhh at lisa.cs.purdue.edu (Matthew Harper) writes:
| >
| >After running cu, we got the follwoing error:
| >ERROR - Can't Access Device
| 
| Make sure you have read/write access to the /dev entry. i.e. chmod 666 
| /dev/xxxxx

Ah, I don't think you want mode 666 (potential security holes), try
'chown uucp /dev/ttyX#'.  Depending on modem type, you probably want
the ttym# device, rather than ttyd#.  Also, if a login was previously
enabled on the port, you want to do a 'killall getty' after the
'telinit q'.