1/4" tapes (was: AIX3.1 InfoExplorer/man pages gone and 1/4" tape drive problem)
Alex Martelli
staff at cadlab.sublink.ORG
Thu Oct 25 01:10:22 AEST 1990
pemurray at miavx1.acs.muohio.edu (Peter Murray) writes:
...
>comes with the system. I was under the impression that all 1/4" tape
>is the same.
It isn't - there's something called 'Flux Transitions per Inch' (ftpi)
rating, which varies; I know of two levels in common use. You have
probably been using 'DC600'-like tapes (or 'DC300'-like, if only 300ft
long); try 'DC6150'-like tapes, with the higher ftpi rating. I am no
quarter-inch-tape expert, but believe DC6150's WILL be usable on any
drive, although DC600's will be cheaper on older or cheaper drives
that will only use their lower allowable ftpi-rating anyway.
--
Alex Martelli - CAD.LAB s.p.a., v. Stalingrado 45, Bologna, Italia
Email: (work:) staff at cadlab.sublink.org, (home:) alex at am.sublink.org
Phone: (work:) ++39 (51) 371099, (home:) ++39 (51) 250434;
Fax: ++39 (51) 366964 (work only; any time of day or night).
More information about the Comp.unix.aix
mailing list