Need replacement Commcard installation

[Jeff Mann]

In article <0D010010.ay6s2g at brain.UUCP> chuck at brain.UUCP writes:
>
>In a similar vein, does Taniwha still make this card? Does anyone market a
>A/UX compatible serial card? I've been searching for some time for a NuBus
>serial card compatible with A/UX, and judging by the response, no such thing 
>exists.

There are several NuBus serial cards with A/UX support. I bought a DigiBoard
Nu8i card. The driver shipped with it was a little buggy, but their tech
support seems quite good, and I'm waiting on a new driver now (they e-mailed
it to me the other day).

The Nu8i eight-port card, or the Nu4i four-port card will also solve some
problems with A/UX. First, it supports both modem control and flow control,
unlike the built-in ports, so that you can use a Telebit with auto-baud
rate conversion. Secondly, it provides Berkeley-like "cu" devices (/dev/cu*)
which can be used by uucp etc. to call out without having to do a
stty -n /dev/tty* -modem first.

One thing to watch out for - if you need synchronous ports (two of the ports
can be configured for this) then get the Nu8i+ which has a DMA controller.
None of the promotional material I got mentioned this.

=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-
|  Jeff Mann  Inter/Access Artists' Computer Centre, Toronto  [416] 535-8601 |
| ...uunet!mnetor!intacc!mann   intacc!mann at nexus.yorku.ca  mann at intacc.uucp |
|      The Matrix Artists' Computer Network BBS: [416] 535-7598 2400 8N1     |
=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-