h2C PROMs cure "dh0: NXM"s of Emulex CS21/H2 on our 11/750 using 4.1bsd

[ado at elsie.UUCP]

We've now had Emulex's "CS21/h2C PROM SET" installed for ten days, and the
"dh0: NXM" diagnostic messages we used to get have disappeared.

We got the new PROMs while our CS21 was under warranty,
so I don't know what they "normally" cost.

The "C" at the end of "CS21/h2C" in "CS21/h2C PROM SET" is a "revision letter."
This "revision letter" appears as the last letter of the paper tags on the PROMs
on the controller board.  If you've already got "C" PROMs, I ask your
forgiveness for raising false hopes.

The Emulex invoice reads (in part):

		CS21/h2C   PROM SET

		consisting of:
		CC2111713
		CC2111701
		CC2111702
		CS2113003	[this has a line through it on the invoice--ado]
		CU2113001

The return address on the invoice:  Emulex Corporation, 3545 Harbor Blvd.,
Costa Mesa, CA  92626; (714) 662-5600; TWX No. 910-595-2521.  We've dealt
with Gary Hendrexson.
--
UNIX is an AT&T Bell Laboratories trademark.
--
	...decvax!allegra!umcp-cs!elsie!ado	(301) 496-5688
	(DEC, VAX and Elsie are Digital Equipment Corp. and Borden's trademarks)