Need help with dialin

[Aris Stathakis]

In <274FD724.65AE at marob.masa.com> daveh at marob.masa.com (Dave Hammond) writes:

>In article <68 at gdx.UUCP> jay at gdx.UUCP (Jay A. Snyder) writes:
>>I'm using a Smart One 2400 hayes compatable modem.
>>I have it setup so that the modem answers properly, but as soon as the
>>modem answers, I get a console message:
>>serial: ERROR: Garbage or loose cable on dev 0, port shut down

>You should have the modem's power-up state configured for no command
>echo (ATE0) and no response codes (ATQ1).  Otherwise, Xenix will get
>stuff like "RING" and "CONNECT" which it assumes is garbage.

An easier way to fix this is to disconnect pin 22 (Ring Indicator)
of your serial cable.  If you are using an internal modem, this is
quite difficult :-)  Install xnx155b (available FREE from SCO or
your local distributor).  Among other things, it will fix the
"serial: ERROR: Garbage or loose cable on dev 0, port shut down"
error.

Aris

-- 
 Aris Stathakis | Bang: ..!uunet!ddsw1!olsa99!tabbs!aris or aris at tabbs.UUCP
-                                                                          -
-           Disco is to music what Etch-A-Sketch is to art.                -