Xenix-Digiboard Problems
Tom Jenkins
tomj at pnet16.cts.com
Fri May 31 00:56:04 AEST 1991
chip at chinacat.unicom.com (Chip Rosenthal) writes:
>In article <1991May26.201728.26322 at ncep1.uucp>
> tomj at pnet16.cts.com (Tom Jenkins) writes:
>>The problem is that our Xenix system hangs
>>every two-three weeks for no apparent reason.
>
>I'm not sure why you are blaming the Digiboard. The PC/8e is a
>fine card - the one I recommend for 8-port UNIX and XENIX systems.
>
>I'd suggest that you are running out of clists. If you've got eight
>ports activly banging away - ain't no way the distributed configuration
>is going to work without hanging. Increase NCLIST and rebuild your
>kernel. (I won't repeat the procedure - I summarized it earlier today
>in another article.)
>
>TFM (section 8.7.2) in the administrator's guide suggests 5 to 10
>clists is the average required per terminal. (Don't count just serial
>lines - you've got a bunch of multiscreen's too, right?) The max is
>16. So, if you've got 8 serial lines and 4 multi screens active, that
>means you need 60 to 120 clists average, 192 maximum. SCO distributes
>XENIX with NCLIST set to 100. I'd recommend 200 for your configuration.
>
>Systems do wierd things when you run out of clists - kinda like
>what you are describing.
>
>P.S. It sure would be nice to have a `crash' program for XENIX to
>debug these sorts of things.
>
>--
>Chip Rosenthal <chip at chinacat.Unicom.COM> | Don't play so
>Unicom Systems Development 512-482-8260 | loud, Mr. Collins.
Ok, I've changed it to 300. Will let you know if the same thing happens.
Btw, thanks for all who responded, and especially Chip and John.
--Tom Jenkins
UUCP: humu!nctams1!pnet16!tomj
ARPA: humu!nctams1!pnet16!tomj at nosc.mil
INET: tomj at pnet16.cts.com
More information about the Comp.unix.xenix.sco
mailing list