SCO UNIX & Mylex CPU

[Terry Lyons]

In article <1729 at lakesys.lakesys.com>, deanr at lakesys.lakesys.com (Dean Roth) writes:
>
> The problem:
> -----------
>
> I have a Mylex 386 25MHz CPU with ESDI disk
> and SCO UNIX 3.2.  The OS insists the system
> has an Arnet 8 port serial board on COM1 & COM2.
> This is no Arnet controller in it, never has been.
 

Call Mylex I had the same thing
the answer is there are 1 or 2 chips that HAVE to be changed to run xenix
(which they will gladly do) once that is done its warp speed (by the way once 
you get it going check and see if the battery powered clock works..please let me 
know) mine didn't work UNTIL we had a  page fault error (think idleout is the 
culprit)