UUCP performance under SCO Xenix 2.2.1

[Wm E. Davidsen Jr]

In article <18051 at rpp386.cactus.org> deano at rpp386.UUCP (Dean Carpenter) writes:
| I'm running SCO Xenix 2.2.1 on an IBM AT (8MHz) with a Hayes 2400 V series
| modem.  I've noticed some pretty poor performance with uucp at 2400 baud,
| namely about 160 cps.  At 1200 I'm getting about 110 cps though.  The modem
| is hung off an IBM 0-12meg card, which has serial and parallel ports on
| the card.  Shouldn't I be getting about 220 cps or so ?

  You have to set your windows to seven instead of three, which is
default. Check the manual.
-- 
bill davidsen - davidsen at sixhub.uucp (uunet!crdgw1!sixhub!davidsen)
    sysop *IX BBS and Public Access UNIX
    moderator of comp.binaries.ibm.pc
"Getting old is bad, but it beats the hell out of the alternative" -anon