xenix hd problems - SOS!
Mark A. Johnson
mj at pur-ee.UUCP
Sat Jul 19 03:54:57 AEST 1986
I need help (I think) with a disk problem on an IBM PC/AT 286
with 40 M of hd and SCO System V 2.1.1 XENIX. Two or three
times we have had these errors on console:
error on fixed disk (minor 40), block = 0
cmd = 0020 status = 5940 sector = 973
cylinder/head = 14/1
and
error on fixed disk (minor 41), block = 0
cmd = 0020 status = 5940 sector = 35798
cylinder/head = 526/1
Minor 41 corresponds to /dev/swap. 40 is /dev/root.
The documentation says that thses errors may occur, but
doesn't say what (if anything) to do if they appear.
What is going on here? Is this a serious problem?
Two things: it's probably about 75-85F in our cpu room
(small room at home), and we have the PC mounted on its
side with the floppy drive on top. Could Either of these things
contribute to the errors?
We also ran badtrk on our / hd and the bad sector table
went from 7 to 50 entries, including EVERY sector between
34867 and 35580. I was afraid to modify the flaw map for
fear of corrupting the filesystem. The sectors appearing
in the error messages above did NOT appear in the new flaw
map.
Any help on this problem would be appreciated. I am cross-
posting (or trying to) to net.unix-wizards... if it doesn't
belong there, sorry.
Thanks,
Mark A Johnson
Purdue Dept of EE
-------------------------------------------------------------------------------
Mark A. Johnson - Purdue University Department of Electrical Engineering
(Department of Redundancy Department)
UUCP:..allegra!purdue!pur-ee!mj USPS:420 S. Chauncey, W. Lafayette, IN 47906
Subject: Xenix hd errors - SOS!
Newsgroups: net.micro.pc, net.unix-wizards
I need help (I think) with a disk problem on an IBM PC/AT 286
with 40 M of hd and SCO System V 2.1.1 XENIX. Two or three
times we have had these errors on console:
error on fixed disk (minor 40), block = 0
cmd = 0020 status = 5940 sector = 973
cylinder/head = 14/1
and
error on fixed disk (minor 41), block = 0
cmd = 0020 status = 5940 sector = 35798
cylinder/head = 526/1
Minor 41 corresponds to /dev/swap. 40 is /dev/root.
The documentation says that thses errors may occur, but
doesn't say what (if anything) to do if they appear.
What is going on here? Is this a serious problem?
Two things: it's probably about 75-85F in our cpu room
(small room at home), and we have the PC mounted on its
side with the floppy drive on top. Could Either of these things
contribute to the errors?
We also ran badtrk on our / hd and the bad sector table
went from 7 to 50 entries, including EVERY sector between
34867 and 35580. I was afraid to modify the flaw map for
fear of corrupting the filesystem. The sectors appearing
in the error messages above did NOT appear in the new flaw
map.
Any help on this problem would be appreciated. I am cross-
posting (or trying to) to net.unix-wizards... if it doesn't
belong there, sorry.
Thanks,
Mark A Johnson
Purdue Dept of EE
-------------------------------------------------------------------------------
Mark A. Johnson - Purdue University Department of Electrical Engineering
(Department of Redundancy Department)
UUCP:..allegra!purdue!pur-ee!mj USPS:420 S. Chauncey, W. Lafayette, IN 47906
Subject: xenix hd problems - SOS!
Newsgroups: xenix, unix-wizards
I need help (I think) with a disk problem on an IBM PC/AT 286
with 40 M of hd and SCO System V 2.1.1 XENIX. Two or three
times we have had these errors on console:
error on fixed disk (minor 40), block = 0
cmd = 0020 status = 5940 sector = 973
cylinder/head = 14/1
and
error on fixed disk (minor 41), block = 0
cmd = 0020 status = 5940 sector = 35798
cylinder/head = 526/1
Minor 41 corresponds to /dev/swap. 40 is /dev/root.
The documentation says that thses errors may occur, but
doesn't say what (if anything) to do if they appear.
What is going on here? Is this a serious problem?
Two things: it's probably about 75-85F in our cpu room
(small room at home), and we have the PC mounted on its
side with the floppy drive on top. Could Either of these things
contribute to the errors?
We also ran badtrk on our / hd and the bad sector table
went from 7 to 50 entries, including EVERY sector between
34867 and 35580. I was afraid to modify the flaw map for
fear of corrupting the filesystem. The sectors appearing
in the error messages above did NOT appear in the new flaw
map.
Any help on this problem would be appreciated. I am cross-
posting (or trying to) to net.unix-wizards... if it doesn't
belong there, sorry.
Thanks,
Mark A Johnson
Purdue Dept of EE
-------------------------------------------------------------------------------
Mark A. Johnson - Purdue University Department of Electrical Engineering
(Department of Redundancy Department)
UUCP:..allegra!purdue!pur-ee!mj USPS:420 S. Chauncey, W. Lafayette, IN 47906
Subject: Xenix hd errors - SOS!
Newsgroups: net.micro.pc, net.unix-wizards
I need help (I think) with a disk problem on an IBM PC/AT 286
with 40 M of hd and SCO System V 2.1.1 XENIX. Two or three
times we have had these errors on console:
error on fixed disk (minor 40), block = 0
cmd = 0020 status = 5940 sector = 973
cylinder/head = 14/1
and
error on fixed disk (minor 41), block = 0
cmd = 0020 status = 5940 sector = 35798
cylinder/head = 526/1
Minor 41 corresponds to /dev/swap. 40 is /dev/root.
The documentation says that thses errors may occur, but
doesn't say what (if anything) to do if they appear.
What is going on here? Is this a serious problem?
Two things: it's probably about 75-85F in our cpu room
(small room at home), and we have the PC mounted on its
side with the floppy drive on top. Could Either of these things
contribute to the errors?
We also ran badtrk on our / hd and the bad sector table
went from 7 to 50 entries, including EVERY sector between
34867 and 35580. I was afraid to modify the flaw map for
fear of corrupting the filesystem. The sectors appearing
in the error messages above did NOT appear in the new flaw
map.
Any help on this problem would be appreciated. I am cross-
posting (or trying to) to net.unix-wizards... if it doesn't
belong there, sorry.
Thanks,
Mark A Johnson
Purdue Dept of EE
-------------------------------------------------------------------------------
Mark A. Johnson - Purdue University Department of Electrical Engineering
(Department of Redundancy Department)
UUCP:..allegra!purdue!pur-ee!mj USPS:420 S. Chauncey, W. Lafayette, IN 47906
Subject: Xenix hd problems - SOS!
Newsgroups: net.micro.pc net.unix
I need help (I think) with a disk problem on an IBM PC/AT 286
with 40 M of hd and SCO System V 2.1.1 XENIX. Two or three
times we have had these errors on console:
error on fixed disk (minor 40), block = 0
cmd = 0020 status = 5940 sector = 973
cylinder/head = 14/1
and
error on fixed disk (minor 41), block = 0
cmd = 0020 status = 5940 sector = 35798
cylinder/head = 526/1
Minor 41 corresponds to /dev/swap. 40 is /dev/root.
The documentation says that thses errors may occur, but
doesn't say what (if anything) to do if they appear.
What is going on here? Is this a serious problem?
Two things: it's probably about 75-85F in our cpu room
(small room at home), and we have the PC mounted on its
side with the floppy drive on top. Could Either of these things
contribute to the errors?
We also ran badtrk on our / hd and the bad sector table
went from 7 to 50 entries, including EVERY sector between
34867 and 35580. I was afraid to modify the flaw map for
fear of corrupting the filesystem. The sectors appearing
in the error messages above did NOT appear in the new flaw
map.
Any help on this problem would be appreciated. I am cross-
posting (or trying to) to net.unix-wizards... if it doesn't
belong there, sorry.
Thanks,
Mark A Johnson
Purdue Dept of EE
-------------------------------------------------------------------------------
Mark A. Johnson - Purdue University Department of Electrical Engineering
(Department of Redundancy Department)
UUCP:..allegra!purdue!pur-ee!mj USPS:420 S. Chauncey, W. Lafayette, IN 47906
Subject: Xenix hd errors - SOS!
Newsgroups: net.micro.pc, net.unix-wizards
I need help (I think) with a disk problem on an IBM PC/AT 286
with 40 M of hd and SCO System V 2.1.1 XENIX. Two or three
times we have had these errors on console:
error on fixed disk (minor 40), block = 0
cmd = 0020 status = 5940 sector = 973
cylinder/head = 14/1
and
error on fixed disk (minor 41), block = 0
cmd = 0020 status = 5940 sector = 35798
cylinder/head = 526/1
Minor 41 corresponds to /dev/swap. 40 is /dev/root.
The documentation says that thses errors may occur, but
doesn't say what (if anything) to do if they appear.
What is going on here? Is this a serious problem?
Two things: it's probably about 75-85F in our cpu room
(small room at home), and we have the PC mounted on its
side with the floppy drive on top. Could Either of these things
contribute to the errors?
We also ran badtrk on our / hd and the bad sector table
went from 7 to 50 entries, including EVERY sector between
34867 and 35580. I was afraid to modify the flaw map for
fear of corrupting the filesystem. The sectors appearing
in the error messages above did NOT appear in the new flaw
map.
Any help on this problem would be appreciated. I am cross-
posting (or trying to) to net.unix-wizards... if it doesn't
belong there, sorry.
Thanks,
Mark A Johnson
Purdue Dept of EE
-------------------------------------------------------------------------------
Mark A. Johnson - Purdue University Department of Electrical Engineering
(Department of Redundancy Department)
UUCP:..allegra!purdue!pur-ee!mj USPS:420 S. Chauncey, W. Lafayette, IN 47906
Subject: xenix hd problems - SOS!
Newsgroups: xenix, unix-wizards
I need help (I think) with a disk problem on an IBM PC/AT 286
with 40 M of hd and SCO System V 2.1.1 XENIX. Two or three
times we have had these errors on console:
error on fixed disk (minor 40), block = 0
cmd = 0020 status = 5940 sector = 973
cylinder/head = 14/1
and
error on fixed disk (minor 41), block = 0
cmd = 0020 status = 5940 sector = 35798
cylinder/head = 526/1
Minor 41 corresponds to /dev/swap. 40 is /dev/root.
The documentation says that thses errors may occur, but
doesn't say what (if anything) to do if they appear.
What is going on here? Is this a serious problem?
Two things: it's probably about 75-85F in our cpu room
(small room at home), and we have the PC mounted on its
side with the floppy drive on top. Could Either of these things
contribute to the errors?
We also ran badtrk on our / hd and the bad sector table
went from 7 to 50 entries, including EVERY sector between
34867 and 35580. I was afraid to modify the flaw map for
fear of corrupting the filesystem. The sectors appearing
in the error messages above did NOT appear in the new flaw
map.
Any help on this problem would be appreciated. I am cross-
posting (or trying to) to net.unix-wizards... if it doesn't
belong there, sorry.
Thanks,
Mark A Johnson
Purdue Dept of EE
-------------------------------------------------------------------------------
Mark A. Johnson - Purdue University Department of Electrical Engineering
(Department of Redundancy Department)
UUCP:..allegra!purdue!pur-ee!mj USPS:420 S. Chauncey, W. Lafayette, IN 47906
Subject: Xenix hd errors - SOS!
Newsgroups: net.micro.pc, net.unix-wizards
I need help (I think) with a disk problem on an IBM PC/AT 286
with 40 M of hd and SCO System V 2.1.1 XENIX. Two or three
times we have had these errors on console:
error on fixed disk (minor 40), block = 0
cmd = 0020 status = 5940 sector = 973
cylinder/head = 14/1
and
error on fixed disk (minor 41), block = 0
cmd = 0020 status = 5940 sector = 35798
cylinder/head = 526/1
Minor 41 corresponds to /dev/swap. 40 is /dev/root.
The documentation says that thses errors may occur, but
doesn't say what (if anything) to do if they appear.
What is going on here? Is this a serious problem?
Two things: it's probably about 75-85F in our cpu room
(small room at home), and we have the PC mounted on its
side with the floppy drive on top. Could Either of these things
contribute to the errors?
We also ran badtrk on our / hd and the bad sector table
went from 7 to 50 entries, including EVERY sector between
34867 and 35580. I was afraid to modify the flaw map for
fear of corrupting the filesystem. The sectors appearing
in the error messages above did NOT appear in the new flaw
map.
Any help on this problem would be appreciated. I am cross-
posting (or trying to) to net.unix-wizards... if it doesn't
belong there, sorry.
Thanks,
Mark A Johnson
Purdue Dept of EE
P.S. Sorry if this got posted twice...
-------------------------------------------------------------------------------
Mark A. Johnson - Purdue University Department of Electrical Engineering
(Department of Redundancy Department)
UUCP:..allegra!purdue!pur-ee!mj USPS:420 S. Chauncey, W. Lafayette, IN 47906
More information about the Comp.unix
mailing list