Sun and TI microlaser
Lee Fedor
fedor at dsg.csc.ti.com
Sat Jan 5 08:16:54 AEST 1991
Are you still having trouble getting your microlaser to work on your Sun?
I have one connected to serial port a of a 4/330 running 4.1 OS and
transcript 2.1. The printer is set up to run postscript and my printcap
entry looks like this:
0|lp|lw|ps|postscript|PostScript:\
:lp=/dev/lw:sd=/usr/spool/lw:\
:lf=/usr/spool/lw/lw-log:af=/usr/adm/lw.acct:\
:br#9600:rw:fc#0000374:fs#0000003:xc#0:xs#0040040:mx#0:sf:sb:\
:if=/usr/tran/sparc/lib/psif:\
:of=/usr/tran/sparc/lib/psof:gf=/usr/tran/sparc/lib/psgf:\
:nf=/usr/tran/sparc/lib/psnf:tf=/usr/tran/sparc/lib/pstf:\
:rf=/usr/tran/sparc/lib/psrf:vf=/usr/tran/sparc/lib/psvf:\
:cf=/usr/tran/sparc/lib/pscf:df=/usr/tran/sparc/lib/psdf:
The printer itself should be set to ps and TI-net, then set to rs242, with
baud rate at what you wish, and parity set to none, stop bits set to one,
and start bits set to 8. I think that is everything you will need.
Regards,
Lee Fedor
System Administrator fedor at dsg.csc.ti.com
More information about the Comp.sys.sun
mailing list