atstatus:No printer selected by Macintosh chooser

[Ron Flax]

In article <43088 at apple.Apple.COM> lantz at Apple.COM (Bob Lantz) writes:
>In article <7617 at gollum.twg.com> sdh at vax2.twg.com ("Sari Harrison") writes:
>>
>>/etc/appletalk to be ethertalk0.  TCP/IP works just fine, but I can't see 
>>any zones.  When the Mac is running MacOS all the zones are there.
>
>Perhaps this is a silly question, but are you connected to an
>Ethertalk network? If not, use localtalk0 as your appletalk interface.

also note that you must have a Phase 2 EtherTalk network,
Phase 1 will not work unless you use LocalTalk.