Ugly little areas when running toolbox application

[John Coolidge]

wdavis at x102c.harris-atd.com (davis william 26373) writes:
>When running an toolbox application that has been launched or running
>a toolbox application such as term which is merely run as a AUX process,
>5 little windows will appear on the top of the screen partially overwriting
>the menu bar.  This occurs whenever a console message would appear.
>In our application, this is specifically happening when NFS has problems.
>We have also seen it when driver debug output has occurred with a
>toolbox program running.  We have also seen this under hfx as well.
>The menu bar can still be accessed even though hidden, and after the
>access, the menu hides behind the window again.

>Does anyone know how to fix this or prevent it?

This is happening because A/UX thinks the console is 1 bit deep and is
writing directly to screen memory. The toolbox program, on the other hand,
has the screen in 8 bit deep mode, and so the screen memory A/UX writes to
gets mapped into the "5 magic boxes".

The best fix would be to find some way to make all console I/O go into a
file rather than onto the screen. X manages to do this, so it can be done,
but right off the top of my head I don't know how to do it. If nobody out
there has a fast-fix program, I'll dig out the X source and try to figure
it out...

--John

--------------------------------------------------------------------------
John L. Coolidge     Internet:coolidge at cs.uiuc.edu   UUCP:uiucdcs!coolidge
Of course I don't speak for the U of I (or anyone else except myself)
Copyright 1990 John L. Coolidge. Copying allowed if (and only if) attributed.
You may redistribute this article if and only if your recipients may as well.