IDE controllers

[John C. Archambeau]

david at talgras.UUCP (David Hoopes) writes:
>Hello,
>	I have been looking at some of the low end 386sx machines.  I would
>like to buy one for working at home.  All of the ones that I have seen have
>IDE hard drives.  I have never used IDE controllers or hard drives.  Will
>SCO Unix/Xenix run ok on one of these machines?

IDE should work just fine.  I've had no problem with using IDE with Novell.  I
plan on upgrading my system's hard drive configuration from a small 40 Mb and
a 10 Mb ST506 MFM to a Conner CP-3204F.  If there is a problem with IDE, it
certainly would surprise me.
 
     // JCA

 /*
 **--------------------------------------------------------------------------*
 ** Flames  : /dev/null                     | Small memory model only for
 ** ARPANET : crash!pnet01!jca at nosc.mil     | Unix?  Get the (*bleep*) out
 ** INTERNET: jca at pnet01.cts.com            | of here!
 ** UUCP    : {nosc ucsd hplabs!hd-sdd}!crash!pnet01!jca
 **--------------------------------------------------------------------------*
 */